Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Assessing biomimetic aquaporin membrane for forward osmosis desalination process: A dataset.

ABSTRACT: This paper presents the performance of aquaporin forward osmosis membrane using chemical fertilizers as a draw solution. The comprehensive evaluation conducted for five conventional fertilizers ((CO (NH2)2, KCl, CaCl2, (NH4)2SO4) and (NH4)2HPO4) as draw solutions. The diluted fertilizer can be used directly for farming as fertigation. In this process, DSs do not need to be recovered and it is a single step desalination process. The data include the characterization of the intrinsic properties of the membrane samples and their performance under FO and PRO modes of operations. In addition, the data for various draw solution concentration under feed solution with deferent total dissolved solids (TDS) were evaluated. For example, a water flux of 17.5 L m- 2 h- 1 and 23.92 g m-2 h-1 reverse solute flux (RSF) was achieved under the FO operation mode for 3 M KCl.

SUBMITTER: Sahebi S

PROVIDER: S-EPMC6811868 | biostudies-other | 2019 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Assessing biomimetic aquaporin membrane for forward osmosis desalination process: A dataset.

Sahebi Soleyman S Fadaie Nasim N Mirshekar Leila L Kamarehie Bahram B Mohammadi Toraj T

Data in brief 20190904

This paper presents the performance of aquaporin forward osmosis membrane using chemical fertilizers as a draw solution. The comprehensive evaluation conducted for five conventional fertilizers ((CO (NH2)2, KCl, CaCl2, (NH4)2SO4) and (NH4)2HPO4) as draw solutions. The diluted fertilizer can be used directly for farming as fertigation. In this process, DSs do not need to be recovered and it is a sin ...[more]

PMID: 31667247

Similar Datasets

Efficiently Combining Water Reuse and Desalination through Forward Osmosis-Reverse Osmosis (FO-RO) Hybrids: A Critical Review.

Project description:Forward osmosis (FO) is a promising membrane technology to combine seawater desalination and water reuse. More specifically, in a FO-reverse osmosis (RO) hybrid process, high quality water recovered from the wastewater stream is used to dilute seawater before RO treatment. As such, lower desalination energy needs and/or water augmentation can be obtained while delivering safe water for direct potable reuse thanks to the double dense membrane barrier protection. Typically, FO-RO hybrid can be a credible alternative to new desalination facilities or to implementation of stand-alone water reuse schemes. However, apart from the societal (public perception of water reuse for potable application) and water management challenges (proximity of wastewater and desalination plants), FO-RO hybrid has to overcome technical limitation such as low FO permeation flux to become economically attractive. Recent developments (i.e., improved FO membranes, use of pressure assisted osmosis, PAO) demonstrated significant improvement in water flux. However, flux improvement is associated with drawbacks, such as increased fouling behaviour, lower rejection of trace organic compounds (TrOCs) in PAO operation, and limitation in FO membrane mechanical resistance, which need to be better considered. To support successful implementation of FO-RO hybrid in the industry, further work is required regarding up-scaling to apprehend full-scale challenges in term of mass transfer limitation, pressure drop, fouling and cleaning strategies on a module scale. In addition, refined economics assessment is expected to integrate fouling and other maintenance costs/savings of the FO/PAO-RO hybrid systems, as well as cost savings from any treatment step avoided in the water recycling.

| S-EPMC5041028 | biostudies-other

Enhanced Forward Osmosis Desalination with a Hybrid Ionic Liquid/Hydrogel Thermoresponsive Draw Agent System.

Project description:Forward osmosis (FO) has emerged as a new technology for desalination and exhibits potentials for applications where reverse osmosis is incapable or uneconomical for treating streams with high salinity or fouling propensity. However, most of current draw agents in FO are salts and difficult to be recycled cost- and energy-effectively. In this work, we demonstrate a new and facile approach to efficiently recover water from the FO process with enhanced water purity by using a binary ion liquid/hydrogel system. The hybrid ion liquid/hydrogel draw solution system demonstrated in this work synergistically leverages the thermoresponsive properties of both the ionic liquid (IL) and hydrogel to improve the overall FO performance. Our findings corroborate that the hydrogel mitigates the water flux decline of the IL as the draw agent and provide a ready route to contiguously and effectively regenerate water from the FO process. Such a route allows for an efficient recovery of water from the draw solute/water mixture with enhanced water purity, compared with conventional thermal treating of lower critical solution temperature IL draw solute/water. Furthermore, hydrogels can be used in a continuous and readily recyclable process to recover water without heating the entire draw solute/water mixture. Our design principles open the door to use low-grade/waste heat or solar energy to regenerate draw agents and potentially reduce energy in the FO process considerably.

| S-EPMC6648795 | biostudies-literature

Polymer Having Dicationic Structure in Dumbbell Shape for Forward Osmosis Process.

Project description:The thermal-responsive polymers, poly(alkane-1,#-diylbis(tri-n-butylphosphonium) 4-vinylbenzenesulfonate) (PSSBP#, # = 8, 6, and 4), where # is the number of carbon atoms in the central bridge structure of the dicationic phosphonium moiety, were synthesized to examine their potential application as draw solutes in forward osmosis (FO). The polymers exhibited low critical solution temperature (LCST) characteristics in aqueous solutions, which is essential for recovering a draw solute from pure water. The LCSTs of the 20 wt% aqueous solutions of PSSBP8, PSSBP6, and PSSBP4 were confirmed to be approximately 30, 38, and 26 °C, respectively, which is advantageous in terms of energy requirements for the recovering draw solute. When the concentration of the PSSBP4 draw solution was 20 wt%, water flux and reverse solute flux were approximately 1.61 LMH and 0.91 gMH, respectively, in the active layer facing the draw solution (AL-DS) system when the feed solution was distilled water. The PSSBP# thermal-responsive draw solute has considerable potential for use as a next-generation draw solute because of its excellent osmotic performance and efficient recovery. Therefore, this study provides inspiration for novel ideas regarding structural transformations of polymers and their applicability as draw solutes.

| S-EPMC6473941 | biostudies-literature

Enhancement of brackish water desalination using hybrid membrane distillation and reverse osmosis systems.

Project description:Desalination of geothermal brackish water by membrane distillation (MD) provides a low recovery rate, but integrating MD with reverse osmosis (RO) can maximize the production rate. In this study, different design configurations of a hybrid system involving brine recycling and cascading are studied via simulations, and the performance improvement due to the process integration is substantiated via the increased recovery rate and reduced specific energy consumption. Brine recycling is also found to improve the recovery rate considerably to 40% at an energy cost of 0.9 $/m3. However, this achievement is only valid when the final brine is recycled to the RO feed: when the final brine is recycled to the MD feed, the overall performance degrades because the recycled brine cools the feed and causes a serious reduction in the driving force and the consequent production rate. Configuring the hybrid system in multiple stages connected in series increases the recovery rate to 90% and reduces the specific energy consumption to 0.9 MJ/kg. Although the specific energy cost increases dramatically because external inter-stage heating is implemented, using a free energy source (such as a geothermal or waste-energy source) for inter-stage heating could provide the optimum configuration.

| S-EPMC6177152 | biostudies-literature

Novel Polysulfone/Carbon Nanotube-Polyamide Thin Film Nanocomposite Membranes with Improved Water Flux for Forward Osmosis Desalination.

Project description:Forward osmosis (FO) is a promising alternative to reverse osmosis (RO) in membrane-based water desalination. In the current study, carboxylated multiwalled carbon nanotubes (MWCNTs) were incorporated in a polyamide (PA) layer formed on top of a polysulfone porous support, resulting in a thin film nanocomposite (TFN) membrane. The amount of MWCNTs was varied (0.01, 0.05, 0.1, and 0.2 wt/vol %). The FO performance was investigated using deionized water as the feed solution and 2 M NaCl as the draw solution. It was found that the carboxylated MWCNTs enhanced the membrane hydrophilicity, surface roughness, and porosity. Such combined effects are believed to have led to enhanced FO water flux. TFN 0.2 showed the highest FO water flux of 73.15 L/m2 h, an improvement of 67% compared to the blank thin-film composite (TFC) membrane and significantly better than the values reported in the literature. Direct observation by transmission electron microscopy revealed the presence of some open-ended CNTs favorably oriented across the PA layer. Those are believed to have facilitated the transport of water through their inner cores and contributed to the increase in water flux. However, this was at the expense of salt rejection and reverse solute flux performance. The best performing membrane was found to be TFN 0.01. It exhibited a salt rejection of 90.1% with a FO water flux of 50.23 L/m2 h, which is 13% higher than the TFC membrane, and a reverse solute flux of 2.76 g/m2 h, which is 21% lower than the TFC membrane. This TFN 0.01 membrane also outperformed the TFN membranes reported in the literature.

| S-EPMC7315434 | biostudies-literature

Modelling and Optimisation of Multi-Stage Flash Distillation and Reverse Osmosis for Desalination of Saline Process Wastewater Sources.

Project description:Nowadays, there is increasing interest in advanced simulation methods for desalination. The two most common desalination methods are multi-stage flash distillation (MSF) and reverse osmosis (RO). Numerous research works have been published on these separations, however their simulation appears to be difficult due to their complexity, therefore continuous improvement is required. The RO, in particular, is difficult to model, because the liquids to be separated also depend specifically on the membrane material. The aim of this study is to model steady-state desalination opportunities of saline process wastewater in flowsheet environment. Commercial flowsheet simulator programs were investigated: ChemCAD for thermal desalination and WAVE program for membrane separation. The calculation of the developed MSF model was verified based on industrial data. It can be stated that both simulators are capable of reducing saline content from 4.5 V/V% to 0.05 V/V%. The simulation results are in accordance with the expectations: MSF has higher yield, but reverse osmosis is simpler process with lower energy demand. The main additional value of the research lies in the comparison of desalination modelling in widely commercially available computer programs. Furthermore, complex functions are established between the optimized operating parameters of multi-stage flash distillation allowing to review trends in flash steps for complete desalination plants.

| S-EPMC7600958 | biostudies-literature

Permselectivity limits of biomimetic desalination membranes.

Project description:Water scarcity and inadequate membrane selectivity have spurred interest in biomimetic desalination membranes, in which biological or synthetic water channels are incorporated in an amphiphilic bilayer. As low channel densities (0.1 to 10%) are required for sufficient water permeability, the amphiphilic bilayer matrix will play a critical role in separation performance. We determine selectivity limits for biomimetic membranes by studying the transport behavior of water, neutral solutes, and ions through the bilayers of lipid and block-copolymer vesicles and projecting performance for varying water channel densities. We report that defect-free biomimetic membranes would have water/salt permselectivities ~108-fold greater than current desalination membranes. In contrast, the solubility-based permeability of lipid and block-copolymer bilayers (extending Overton's rule) will result in poor rejection of hydrophobic solutes. Defect-free biomimetic membranes thus offer great potential for seawater desalination and ultrapure water production, but would perform poorly in wastewater reuse. Potential strategies to limit neutral solute permeation are discussed.

| S-EPMC6025908 | biostudies-other

Anti-Fouling Double-Skinned Forward Osmosis Membrane with Zwitterionic Brush for Oily Wastewater Treatment.

Project description:Despite its attractive features for energy saving separation, the performance of forward osmosis (FO) has been restricted by internal concentration polarization and fast fouling propensity that occur in the membrane sublayer. These problems have significantly affected the membrane performance when treating highly contaminated oily wastewater. In this study, a novel double-skinned FO membrane with excellent anti-fouling properties has been developed for emulsified oil-water treatment. The double-skinned FO membrane comprises a fully porous sublayer sandwiched between a highly dense polyamide (PA) layer for salt rejection and a fairly loose dense bottom zwitterionic layer for emulsified oil particle removal. The top dense PA layer was synthesized via interfacial polymerization meanwhile the bottom layer was made up of a zwitterionic polyelectrolyte brush - (poly(3-(N-2-methacryloxyethyl-N,N-dimethyl) ammonatopropanesultone), abbreviated as PMAPS layer. The resultant double-skinned membrane exhibited a high water flux of 13.7?±?0.3?L/m2.h and reverse salt transport of 1.6?±?0.2?g/m2.h under FO mode using 2?M NaCl as the draw solution and emulsified oily solution as the feed. The double-skinned membrane outperforms the single-skinned membrane with much lower fouling propensity for emulsified oil-water separation.

| S-EPMC5537261 | biostudies-literature

Quantification of Aquaporin-Z reconstituted into vesicles for biomimetic membrane fabrication.

Project description:Aquaporin incorporated biomimetic membranes are anticipated to offer unprecedented desalination capabilities. However, the lack of accurate methods to quantify the reconstituted aquaporin presents a huge hurdle in investigating aquaporin performance and optimizing membrane fabrication. Herein, we present three quantification methods to determine the Aquaporin-Z reconstituted into E. coli lipid vesicles: 1) nanogold labeling with transmission electron microscopy (TEM) visualization, 2) nickel labeling with inductively coupled plasma-mass spectrometry (ICP-MS) and 3) gel electrophoresis. The TEM method serves as a quick way to determine if aquaporin has been reconstituted, but is not quantitative. The numerical results from quantitative methods, ICP-MS and gel electrophoresis, correlate closely, showing that 60?±?20% vs 66?±?4% of Aquaporin-Z added is successfully reconstituted into vesicles respectively. These methods allow more accurate determination of Aquaporin-Z reconstituted and loss during reconstitution, with relatively commonly available equipment and without complex sample handling, or lengthy data analysis. These would allow them to be widely applicable to scientific studies of protein function in the biomimetic environment and engineering studies on biomimetic membrane fabrication.

| S-EPMC5599656 | biostudies-literature

Photo-polymerization as a new approach to fabricate the active layer of forward osmosis membrane.

Project description:A novel approach is employed to prepare the active layer of the forward osmosis membrane by the photo-polymerization method. The poly (ethylene glycol) phenyl ether acrylate (PPEA) and methacrylic acid (MAA) are used as monomers. The emphasis is given to analysing the effect of monomer concentration on chemical functional groups of active layer, thermal stability, surface morphology, roughness, interfacial free energy, organic fouling tendency and osmotic flux performance. The functional groups of the active layer are characterized by ATR-FTIR. Furthermore, thermal analysis (TGA/DTG) is performed to calculate grafting density and thermal stability of prepared FO membranes. Surface morphology and roughness are characterized by atomic force microscopy (AFM). Unlike control polyamide active layer membrane that suffered from organic fouling (28.14?±?3.70% flux decline and 95% flux recovery), the photo-polymerized 75/25 active layer FO membrane demonstrated the low fouling propensity (2.77?±?0.62% flux decline) and high flux recovery (nearly ~100%). The interfacial free energy and low fouling property of 75/25 FO membrane is also reflected in improved osmotic flux performance with 11.20?±?0.79?L/g (AL-FS) and 8.41?±?0.22?L/g (AL-DS) reverse solute flux selectivity (RSFS) (Jw/Js) than control polyamide FO membrane (7.94?±?0.22?L/g (AL-FS) and 7.64?±?0.54?L/g (AL-DS)).

| S-EPMC6374509 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data