Expression data from Arabidopsis root cells
Ontology highlight
ABSTRACT:
ORGANISM(S): Arabidopsis thaliana
PROVIDER: GSE102691 | GEO | 2017/08/16
SECONDARY ACCESSION(S): PRJNA398392
REPOSITORIES: GEO
Similar Datasets
Project description:Using cell sorting technique, we collected Arabidopsis root hair protoplasts (transgenic line harboring root hair specific gene promoter ::GFP, here named GFP) and nonGFP protoplasts( whole root except root hair). Then, we extracted total proteins and RNA for proteome and RNASeq. RNAseq data have already been deposited into NCBI (accession numbers SRR364677 and SRR364678). Total proteins were separated by 1D SDS-PAGE, followed by gel slicing, in gel digested and run ESI-LC-MS/MS on LTQ Orbitrap Velos. We set two biological repeats and each sample was scanned two times (two technique repeats). We then combined all ms/ms raw data from all fractions and technique repeats from one biological sample into one file to indentify proteins by searching Arabidopsis protein database with software Proteome Discoverer (with two searching engines mascot and sequester). Protocol: Protoplasts from EXP7 and non-GFP protoplastswere stored at -80°C, thawed on ice for 5 min, vortexed several times and suspended in 5 x volume of pre-cooled acetone (-20°C) containing 10% (v/v) trichloroacetic acid (TCA) and 0.07% (v/v) 2-mercaptoethanol. Proteins were then precipitated for 2 h at −20°C after thorough mixing. Proteins were collected by centrifuging at 35,000 g (JA-20 108 rotor, Beckman J2-HS) at 4°C for 30 min. The supernatant was removed and the protein pellets were washed three times with cold acetone containing 0.07% (v/v) 2-mercaptoethanol and 1 mMphenylmethanesulfonylfluoride. Protein pellets were dried by lyophilization and stored at -80°C, or immediately extracted using Laemmli buffer (63 mM TrisHCl pH 6.8, 10% glycerol, 2% SDS, 0.0025% bromophenol blue). Protein concentration was determined using Pierce protein assay kit (Pierce, Rockford). Proteins from each sample were separated using a Bis-Tris precast gradient gel (4−16%, Bio-Rad) according to the manufacturer’s instructions. After electrophoresis, the gel was Coomassie-stained using the Colloidal Blue Staining Kit (Invitrogen). The protocol used for in-gel trypsin digestion of proteins in gels was adapted from the method described in Shevchenko et al. (1996). Briefly, protein bands were manually excised and each band was cut into small pieces (~0.5 mm). The gel pieces were washed three times with a solution containing 50% methanol and 5% acetic acid for 2 h, twice with a solution containing 25 mM NH4HCO3 in 50% acetonitrile for 10 min each, and then the gel pieces were dried in a vacuum centrifuge. Reduction of proteins in gel pieces was performed with DTT and alkylation with iodoacetamide, and the gel pieces were washed and dried in a vacuum centrifuge. A trypsin solution in 25 mM NH4HCO3 containing 75 to 100 ng of sequencing grade modified trypsin (Promega) in 25-40 µl was added and incubated with gel pieces for 12-16 h at 37°C. To recover the tryptic peptides, a solution of 30 µl containing 5% formic acid and 50% acetonitril was added to the gel pieces, agitated in a vortex for 30-60 min and withdrawn into a new tube. The recovery was repeated once with 15 µl solution and the resulting two recovers were combined and dried in a vacuum centrifuge. The dried pellet was re-dissolved in 10-20 µl of 0.1% formic acid for LC-MS/MS analysis.
2013-05-28 | PXD000195 | Pride
Project description:Strain N16961 grown in M9 + 0.5 % lactate to OD 0.2. Culture was split and one part added 0.6 mM of indicated chitin oligosaccharide. Samples was isolated after 30 and 60 min. cDNA was prepared from 2 ug RNA and labeled with Cy3 (no induction) and Cy5 (induction with chitin oligosaccharide). Samples from at least two independent experiments and a total of four hybridizations for each chitin oligosaccharide and time. A growth condition experiment design type is where some part of the growth condition is changed for the purposes of the experiment, examples of growth conditions changed are media, temperature, humidity, light, nutrients. Keywords: growth_condition_design
2005-08-11 | GSE3101 | GEO
Project description:Gene expression in 0.5 mm root tips of Arabidopsis
| PRJNA304730 | ENA
Project description:Strain N16961 grown in M9 + 0.5 % lactate to OD 0.2. Culture was split and one part added 0.6 mM of indicated chitin oligosaccharide. Samples was isolated after 30 and 60 min. cDNA was prepared from 2 ug RNA and labeled with Cy3 (no induction) and Cy5 (induction with chitin oligosaccharide). Samples from at least two independent experiments and a total of four hybridizations for each chitin oligosaccharide and time.
2005-07-21 | E-SMDB-2237 | biostudies-arrayexpress
Project description:We examined the early gene expression profiles (30 min) of log-phase wild-type C. albicans growing in YPD at 30 °C in response to respiration inhbitors 1mM SNP, 0.5 mM SHAM, or 1 mM SNP+ 0.5 mM SHAM combination
2019-01-12 | GSE114531 | GEO
Project description:The aim of the project was to purify Xenopus replisome from replicationg chromatin assembled in Xenopus laevis egg extract. To this end recombinant Cdc45-TEV-His10-FLAG5 was expressed in bacteria and purified. 4 ml of Xenopus laevis egg extract was activated into interphase and supplemented with 10 ng/µl of demembranated sperm DNA, 70 nM recombinant Cdc45, 40 µM aphidicolin, 5 mM caffeine and incubated at 23°C for 60 min. Chromatin was isolated in ANIB100 buffer (50 mM HEPES pH 7.6, 100 mM KOAc, 10 mM MgOAc, 2.5 mM Mg-ATP, 0.5 mM spermidine, 0.3 mM spermine, 1 µg/ml of each aprotinin, leupeptin and pepstatin, 25 mM β-glycerophosphate, 0.1 mM Na3VO4 and 10 mM 2-chloroacetamide) as described previously (Gillespie, Gambus et al. 2012). Chromatin pellets re-suspended in ANIB100 containing 20% sucrose. Protein complexes were released from chromatin by digestion with 4 U/µl benzonase nuclease (E1014-25KU, Sigma) and sonicated for 5 min using a sonicator with settings: 30 sec on, 30 sec off, low power (Bioruptor Diagenode UCD-200). Immunoprecipitation was performed using 100 µl of anti-FLAG M2 magnetic beads (Sigma-Aldrich). Before elution the sample was washed four times with 1 ml of ANIB100 20% sucrose, ANIB100 20% sucrose 0.1% Triton X-100, ANIB100 and elution buffer (25 mM HEPES pH 7.5, 100 mM KAc, 5 mM MgAc, 1 mM ATP and 0.02% NP-40), respectively. The sample was eluted adding 250 µM 3xFLAG peptide (Stratech) to 200 µl of elution buffer and a small proportion of it analysed by mass spectrometry.
2023-10-27 | PXD044422 | Pride
Project description:The CLIP procedures were conducted using HeLa cells according to the previous study (Liu et al., 2016) with slight modifications. Briefly, 4 plates of HeLa cells in 15 cm dishes were transfected with pPB/ALKBH3 plasmid for 48 h to reach about 90% cell confluency. After washing twice with ice-cold PBS, cells were irradiated twice with 400 mJ/cm2 at 254 nm by Stratalinker on ice. Cells were lysed in high salt lysis buffer (300 mM NaCl, 0.2% NP-40, 20 mM Tris-HCl PH 7.6, 0.5 mM DTT, protease inhibitor cocktail (1 tablet/50 ml), and RNase inhibitor (1:200)) at 4°C for 30 min. Supernatant was collected after centrifuged at 17,000 g at 4°C for 15 min and further treated with 1 U RNase T1 for 15 min at 24 °C. After centrifugation and filtration through 0.22 µM filter, 10% supernatant was collected as input for further sequencing analysis. Anti-Flag M2 beads (Sigma-Aldrich, St. Louis, MO, 80 μl) were washed three times with lysis buffer and incubated with the filtered supernatant at 4°C for 4 hrs. After removing the flow through by magnetic rack, beads and input were further incubated with 10 U RNase T1 exactly for 8 min. Samples were treated with 95 µL commercial PNK buffer and 0.5 U PNK for 15 min at 37 °C. After treatments, final concentration of 100 µM ATP and 1 U PNK were added and incubated at 37 °C for another 30 min. The RNA/protein complexes were eluted by NuPAGE 1 × loading buffer and fractionated by neutral NuPAGE 4–12% bis-tris gel. After cutting the gel, RNAs were recovered by proteinase K digestion in proteinase K buffer, followed by phenol/chloroform extraction using glycogen as carrier. The RNA fragments were ligated to adapter and established library by NEB small RNA library preparation kit (E7330S).
2022-03-01 | GSE112625 | GEO
Project description:Flag-YBX1 overexpressed T24 cells pellets were resuspended with 2 volume of lysis buffer (150 mM KCl, 10 mM HEPES pH 7.6, 2 mM EDTA, 0.5% NP-40, 0.5 mM DTT, 1:100 protease inhibitor cocktail, 400 U/ml RNase inhibitor), and incubated at 4 °C for 30 min with rotation. Then the lysate was centrifuged at 15 000 g for 20 min. Before incubating the lysate with Flag beads, 100ul were taken as input. The anti-Flag M2 magnetic beads (Sigma, 10 μl per mg lysate) were washed with NT2 buffer (200 mM NaCl, 50 mM HEPES pH 7.6, 2 mM EDTA, 0.05% NP-40, 0.5 mM DTT, 200 U/ml RNase inhibitor) four times. Cell lysate was mixed with M2 beads and incubated at 4 °C for 4 h with rotation. The beads were washed two times with 1 ml ice-cold NT2 buffer. Then the beads were subject to Micrococal nuclease (NEB) digestion (1:1 000 000 dilution) for 8 min at 37 °C. The beads were cooled on ice immediately for 5 min and washed two times with 1 ml ice-cold 1× PNK+EGTA buffer (50 mM Tris-HCl pH 7.5, 20 mM EDTA, 0.05% NP-40, 200 U/ml RNase inhibitor) and two times with 1 ml ice-cold 1× PK buffer (50 mM NaCl, 100 mM Tris-HCl pH 7.5, 10 mM EDTA, 0.2% SDS, 200 U/ml RNase inhibitor). Then the beads were digested with 200 μl pre-heated (20 min at 50 °C) Proteinase K and RNAs were extracted with an equal volume of Acid-Phenol: Chloroform, pH 4.5 (Ambion). The RNAs were subjected to rRNA removal and Bisseq. The libraries were sequenced on the Illumina HiSeq X-Ten platform at Novogene (Tianjin, CA) with paired-end 150 bp read length.The m5C sites were called using meRanCall from meRanTK (FDR < 0.01).
2019-07-02 | GSE133625 | GEO
Project description:MicroPoly(A)Pure kits (Ambion) were used to prepare mRNA from P. salmonis-infected and control Atlantic salmon head kidney. Head kidney mRNA samples were prepared from pooled (n = 10) infected or control kidney. Approximately 200 ng of infected or control head kidney mRNA was used as template in aRNA synthesis reactions. Two infected head kidney samples were pooled to yield 8.9 ug of aRNA, and a single control head kidney sample contained 8.4 ug of aRNA. Infected and control head kidney aRNA samples were visualized on agarose gels to check quality and quantity (data not shown). Except for the amounts of aRNA and reverse transcription (RT) primer used, head kidney target labeling reactions and microarray hybridizations were identical. Head kidney target syntheses used 2 ug of aRNA and 2 ug of random primers (Roche). RT primers were mixed with aRNA samples, and nuclease-free H2O (Invitrogen) was added to make 10 ul total volume. Samples were incubated at 70 degrees C for 4 min, then placed on ice. RT reactions included 50 mM Tris HCl pH 8.3, 75 mM KCl, 3 mM MgCl2, 10 mM DTT, 0.5 mM each dATP, dCTP, and dGTP, 0.2 mM dTTP, 0.05 mM Cy3-dUTP or Cy5-dUTP (Amersham), 40U RNAguard ribonuclease inhibitor (Amersham), and 400U Superscript II Rnase H- reverse transcriptase (Invitrogen). RT reactions were incubated at 42 degrees C for 2.5 h, followed by addition of 0.025U RNase A (Sigma) and 1.5U RNase H (New England BioLabs) and incubation at 37 degrees C for 30 min. Labeled targets were cleaned using the Qiaquick PCR purification kit (Qiagen) and precipitated, with 300 mM sodium acetate, 1 ul of 20 ug/ul glycogen (Invitrogen), and 2.5 volumes of 100% ethanol, at -20 degrees C overnight. Each labeled target was recovered by centrifugation (14,000 rpm, 4 degrees C, 1 h), washed in 70% ethanol, air-dried, and resuspended in 60 ul of hybridization buffer: 50% deionized formamide, 5X SSC, 0.1% SDS, 5 ul of 5 ug/ul oligo dT (5’T18[Q-N]3’), 5 ul of 2 ug/ul BSA (Pierce), and 2 ul of 10 ug/ul sonicated human placental DNA (Sigma). Targets were incubated at 96 degrees C for 3 min, and then at 65 degrees C until applied to microarrays. Microarrays were prepared for hybridization by washing 2 X 5 min in 0.1% SDS, washing 5 X 1 min in MilliQ H2O, immersing 3 min in 95 degrees C MilliQ H2O, and drying by centrifugation (2000 rpm, 5 min, in 50 ml conical tube). Microarray hybridizations were run in the dark under HybriSlips hybridization covers (Grace Biolabs) in slide hybridization chambers (Corning) submerged in a 45 degrees C water bath for 16 h. Coverslips were floated off in 45 degrees C (1X SSC, 0.2% SDS), and arrays were washed 1 X 10 min in 45 degrees C (1X SSC, 0.2% SDS), 3 X 4 min in room temperature (0.1X SSC, 0.1% SDS), and 4 X 4 min in room temperature 0.1X SSC. Slides were dried by centrifugation as before. Fluorescent images of hybridized arrays were acquired immediately at 10 um resolution using ScanArray Express (PerkinElmer). The Cy3 and Cy5 cyanine fluors were excited at 543 nm and 633 nm respectively, and the same laser power (90%) and photomultiplier tube (PMT) settings were used for all slides in a study (PMT 75 Cy3, PMT 63 or 64 Cy5 for head kidney study). Fluorescent intensity data were extracted from TIF images using Imagene 5.5 software (Biodiscovery). Keywords: other
2004-02-11 | GSE1031 | GEO
Project description:Sirturo or Bedaquiline has been shown to inhibit the ATP synthase of Mycobacterium tuberculosis. We used microarrays to investigate compound-induced gene expression changes in general as well as effects on the transcription of the different ATP synthase genes and other metabolic pathways. Log phase Mycobacterium tuberculosis were cultivated in Middlebrook 7H9 broth and treated with 1 M-BM-5M Bedaquiline. We have extracted RNA from five different time-points after treatment: 0 min (T0), 30 min (T30), 60 min (T60), 180 min (T180) and 360 min (T360).
2014-03-03 | E-GEOD-43749 | biostudies-arrayexpress