Dataset Information

Distribution of different proteins related to sister chromatid cohesion during the cell cycle.

ABSTRACT: This series is a supplementary data set for the manuscript titled "Cohesin relocation from sites of chromosomal loading to places of convergent transcription" All data shown in the paper were registered (30 ChIP-chip and one transcription data). Experimental design: 1. Type of experiment: a. ChIP (Chromatin immunoprecipitation) analysis hybridised to a high density oligonucleotide array. The S. cerevisiae chromosome VI array described by Katou et al. (2003) Nature 424, 1078-83 has been used. Newly developed S. cerevisiae chromosomes III-V and S. pombe chromosomes 2-3 oligonucleotide arrays produced by Affymetrix have also been used. b. Gene expression profile analysis of S. cerevisiae. 2. Experimental factors: a. Distribution of different proteins related to sister chromatid cohesion or condensation during the cell cycle, mainly in G1 (alpha-factor arrested cells), S-phase (HU arrested cells) and metaphase (Nocodazole arrested cells). b. Gene expression profile analysis of logarithmically growing cells. 3. Number of hybridizations performed: a. ChIP analysis: 32 b. Gene expression: 1 4. Hybridisation design: ChIP analysis: comparison of ChIP fraction with SUP (supernatant) fraction 5. Quality control: Duplication, confirmation using different tags, different subunits of the same complex, and different yeast strain backgrounds (W303, BY4741, and SK1). Checking of the ChIP fraction by Western blotting. Checking amount of mRNA by RT-PCR. 6. URL of supplemental website: GEO Accession number: GSE1461 Web site: http://chromosomedynamics.bio.titech.ac.jp Samples used, extract preparation and labeling: 1. Origin of the biological sample Budding yeast (Saccharomyces cerevisiae) and fission yeast (Schizosaccharomyces pombe) 2. Manipulation of the samples and the protocols used: a. Mitotic budding yeast cells were synchronised in G1 with alpha-factor (2uM) and then released at 23ºC into medium containing 200 mM HU or 7.5 ug/ml Nocodazole for 60 min and 150 min, respectively. scc2-4 cells were shifted to 37ºC 60 min before alpha-factor release. Heat-shock treatment has been done at 37ºC for 15 minutes. b. Meiotic budding yeast cells were collected 4 hours after meiosis induction at 23ºC. c. Mitotic fission yeast cells were grown logarithmically in minimum medium (MM). Cells were fixed over night in 1% formaldehyde at 4ºC. 3. Protocols for preparing extracts: a. ChIP analysis: Extract preparation was processed following the Shirahige lab protocol (http://chromosomedynamics.bio.titech.ac.jp ). 5x10^8 cells were disrupted using Multi-Beads Shocker (MB400U, YASUI KIKAI, Osaka). Whole cell extract was sonicated to obtain 400-600 bp genomic DNA fragments. Anti-HA monoclonal antibody (clone 16B12, CRP Inc., Denver, PA) and anti-Flag monoclonal antibody M2 (Sigma-Aldrich Co., St Louis, MO) coupled to Dynabeads (Dynal, protein A Dynabeads) were used for chromatin immunoprecipitation. The immunprecipates were eluted and incubated over night at 65ºC to reverse the cross-link. Immunoprecipitated genomic DNA was incubated with proteinase K, extracted 2 times with phenol/chloroform/isoamylalcohol, precipitated, resuspended in TE and incubated with RnaseA. The DNA was then purified using the Qiagen PCR purification kit, and concentrated by ethanol precipitation. The DNA was amplified by PCR after random priming. 10 ug of amplified DNA was digested with Dnase I to a mean size of 100 bp. After Dnase I inactivation at 95ºC, fragments were labelled as detailled below. b. Gene expression analysis: Total RNA was prepared using FastRNA Pro Red Kit (BIO 101 Systems) according to the manufacturer’s instructions. 10 ug of total RNA was reverse transcribed according to the protocol recommended by Affymetrix. In vitro transcription was performed on 1 ug of cDNA. cRNA was cleaned and fragmented by heating. 20 ug of fragmented cRNA were hybridised. 4. Labelling protocol DNA fragments were end-labelled by addition of 25 U of Terminal Transferase and 1 nmol Biotin-N6ddATP (NEN) for 1 hour at 37ºC as previously described by Winzeler et al. (Science. 281, 1194-1197, 1998). The entire sample was used for hybridization. Hybridization procedures and parameters: Hybridization, blocking and washing were carried out as previously described (http://chromosomedynamics.bio.titech.ac.jp). Each sample was hybridized to the array in 150 ul containing 6xSSPE; 0.005% TritonX-100; 15 ug fragmented denatured salmon sperm DNA (Gibco-BRL); 1 nmole 3’biotin labelled control oligonucleotide (oligo B2, Affymetrix). Samples were denatured at 100ºC for 10 minutes, and then put on ice before being hybridized for 16 hours at 42ºC in an hybridization oven (GeneChip Hybri. Oven 320, Affymetrix). Washing and scanning protocol (FlexMidi-euk2v3-450) provided by Affymetrix was performed automatically on a fluidics station (GeneChip fluidics station 400, Affymetrix). Measurement data and specifications: S. cerevisiae arrays were scanned using the HP GeneArray Scanner (Affymetrix) at an emission wavelength of 560 nm, resolution 7.5 uM. S. pombe arrays were scanned by GeneChip Scanner 3000 (Affymetrix) at an emission wavelength of 570 nm, resolution 2.5 uM. Grids were aligned to scans following the library array description. Primary data analyses were carried out using Affymetrix Microarray Suite Ver.5.0 software to obtain signal intensity, fold change value, change p-value and detection p-value. The detailed information of this analysis is available at http://www.affymetrix.com/support/technical/whitepapers/sadd_whitepaper.pdf and http://www.affymetrix.com/support/technical/technotes/statistical_reference_guide.pdf To discriminate significant signals for binding to DNA (dark grey signals), signals from the ChIP fraction scan were compared to the SUP (supernatant) fraction scan using the 3 following criteria: first, the signal reliability was judged by the detection p-value of each locus (p-value ≤0.025); secondly, reliability of binding ratio was judged by change p-value (p-value ≤0.025); thirdly, only clusters of at least 3 contiguous loci responding to the 2 previous criteria were selected as significantly enriched locus. The light grey signals represent the statistically not significantly enriched signals. The software to present the result (chr6viewer) is available at http://everythingchromovi.gsc.riken.go.jp. The raw and transformed data files are available at GEO database website and at our web site http://chromosomedynamics.bio.titech.ac.jp. Array Design 1. General array design: in situ synthesized arrays by Affymetrix 2. Availability of arrays: commercially available from Affymetrix 3. Location and ID of each spot on arrays: available at our web site (http://chromosomedynamics.bio.titech.ac.jp) and from Affymetrix on request 4. Probe type: oligonucleotide 5. The arrays used in this study can be purchased from Affymetrix: Chromosome VI S.cerevisiae: rikDACF, P/N# 510636 Chromosome III,IV,V S.cerevisiae: SC3456a520015F, P/N# 520015 Chromosome II,III S.pombe: S_pombea520106F, P/N# 520106 YGS98 GeneChipsT oligonucleotide arrays: P/N# 900256 Keywords = Yeast Cohesin Condensin Loading Distribution Keywords: other

ORGANISM(S): Saccharomyces cerevisiae Schizosaccharomyces pombe

PROVIDER: GSE1461 | GEO | 2004/06/29

SECONDARY ACCESSION(S): PRJNA90035

REPOSITORIES: GEO

ACCESS DATA

Dataset's files

Source:

			Action	DRS
		Other

Items per page:

1 - 1 of 1

Similar Datasets

Project description:This series is a supplementary data set for the manuscript titled "Postreplicative recruitment of Cohesin to double-strand breaks is required for DNA repair" All data shown in the paper plus duplicate experiments were registered (15 ChIP-chip data). Experimental design: 1. Type of experiment: ChIP (Chromatin immunoprecipitation) analysis hybridized to high density oligonucleotide arrays. The S. cerevisiae chromosome VI array described by Katou et al. (2003) Nature 424, 1078-83 and the newly developed S. cerevisiae chromosomes III-VIa have been used. 2. Experimental factors: Distribution of the sister chromatid cohesion protein Scc1, before and after induction of a DNA double strand break (dsb) on chromosome III, V and VI in G2/metaphase cells were analysed (Benomyl arrested cells). 3. Number of hybridizations performed: ChIP analysis: 15 4. Hybridisation design: ChIP analysis: comparison of ChIP fraction with SUP (supernatant) fraction 5. Quality control: Duplication of experiments, confirmation of recruitment of the analysed protein to a dsb by induction of breaks at three different positions in the genome. Mock hybridisation of samples immunoprecipitated from cells containing no tag recognized by antibody used. Checking of the ChIP fraction by Western blotting. 6. URL of supplemental website: GEO Accession number: GSE1905 Web site: http://chromosomedynamics.bio.titech.ac.jp Samples used, extract preparation and labeling: 1. Origin of the biological sample Budding yeast (Saccharomyces cerevisiae). 2. Manipulation of the samples and the protocols used: Mitotic budding yeast cells were synchronised in G2/M with Benomyl (80 ug/ml) Cells were fixed 30 minutes at room temperature plus over night in 1% formaldehyde at 4C. 3. Protocols for preparing extracts: ChIP analysis: Extract preparation was processed following the Shirahige lab protocol (http://chromosomedynamics.bio.titech.ac.jp ). 5x10^8 cells were disrupted using Multi-Beads Shocker (MB400U, YASUI KIKAI, Osaka). Whole cell extract was sonicated to obtain 400-600 bp genomic DNA fragments. Anti-Flag monoclonal antibody M2 (Sigma-Aldrich Co., St Louis, MO) coupled to Dynabeads (Dynal, protein A Dynabeads) were used for chromatin immunoprecipitation. The immunprecipates were eluted and incubated over night at 65¨¬C to reverse the cross-link. Immunoprecipitated genomic DNA was incubated with proteinase K, extracted 2 times with phenol/chloroform/isoamylalcohol, precipitated, resuspended in TE and incubated with RnaseA. The DNA was then purified using the Qiagen PCR purification kit, and concentrated by ethanol precipitation. The DNA was amplified by PCR after random priming. 10 ug of amplified DNA was digested with Dnase I to a mean size of 100 bp. After Dnase I inactivation at 95¨¬C, fragments were labelled as detailed below. 4. Labeling protocol DNA fragments were end-labeled by addition of 25 U of Terminal Transferase and 1 nmol Biotin-N6ddATP (NEN) for 1 hour at 37C as previously described by Winzeler et al. (Science. 281, 1194-1197, 1998). The entire sample was used for hybridization. 5. Hybridization procedures and parameters: Hybridization, blocking and washing were carried out as previously described (http://chromosomedynamics.bio.titech.ac.jp). Each sample was hybridized to the array in 150 ul containing 6xSSPE; 0.005% TritonX-100; 15 ug fragmented denatured salmon sperm DNA (Gibco-BRL); 1 nmole 3’biotin labelled control oligonucleotide (oligo B2, Affymetrix). Samples were denatured at 100C for 10 minutes, and then put on ice before being hybridized for 16 hours at 42C in an hybridization oven (GeneChip Hybri. Oven 320, Affymetrix). Washing and scanning protocol (FlexMidi-euk2v3-450) provided by Affymetrix was performed automatically on a fluidics station (GeneChip fluidics station 400, Affymetrix). 6. Measurement data and specifications: S. cerevisiae arrays were scanned using the HP GeneArray Scanner (Affymetrix) at an emission wavelength of 560 nm, resolution 7.5 uM. Grids were aligned to scans following the library array description. Primary data analyses were carried out using Affymetrix Microarray Suite Ver.5.0 software to obtain signal intensity, fold change value, change p-value and detection p-value. The detailed information of this analysis is available at http://www.affymetrix.com/support/technical/whitepapers/sadd_whitepaper.pdf and http://www.affymetrix.com/support/technical/technotes/statistical_reference_ guide.pdf To discriminate significant signals for binding to DNA (dark grey signals), signals from the ChIP fraction scan were compared to the SUP (supernatant) fraction scan using the 3 following criteria: first, the signal reliability was judged by the detection p-value of each locus (p-value <=0.025); secondly, reliability of binding ratio was judged by change p-value (p- value <=0.025); thirdly, only clusters of at least 3 contiguous loci responding to the 2 previous criteria were selected as significantly enriched locus. The light grey signals represent the statistically not significantly enriched signals. The software to present the result (chr6viewer) is available at http://everythingchromovi.gsc.riken.go.jp. The raw and transformed data files are available at GEO database website and at our web site http://chromosomedynamics.bio.titech.ac.jp. 6. Array Design 1. General array design: in situ synthesized arrays by Affymetrix 2. Availability of arrays: commercially available from Affymetrix 3. Location and ID of each spot on arrays: available at our web site (http://chromosomedynamics.bio.titech.ac.jp) and from Affymetrix on request 4. Probe type: oligonucleotide 5. The arrays used in this study can be purchased from Affymetrix: Chromosome VI S.cerevisiae: rikDACF, P/N# 510636 Chromosome III,IV,V,VIa S.cerevisiae: SC3456a520015F, P/N# 520015 Keywords: other

Project description:This series is a supplementary data set for the manuscript titled "Cohesin relocation from sites of chromosomal loading to places of convergent transcription" All data shown in the paper were registered (30 ChIP-chip and one transcription data). Experimental design: 1. Type of experiment: a. ChIP (Chromatin immunoprecipitation) analysis hybridised to a high density oligonucleotide array. The S. cerevisiae chromosome VI array described by Katou et al. (2003) Nature 424, 1078-83 has been used. Newly developed S. cerevisiae chromosomes III-V and S. pombe chromosomes 2-3 oligonucleotide arrays produced by Affymetrix have also been used. b. Gene expression profile analysis of S. cerevisiae. 2. Experimental factors: a. Distribution of different proteins related to sister chromatid cohesion or condensation during the cell cycle, mainly in G1 (alpha-factor arrested cells), S-phase (HU arrested cells) and metaphase (Nocodazole arrested cells). b. Gene expression profile analysis of logarithmically growing cells. 3. Number of hybridizations performed: a. ChIP analysis: 32 b. Gene expression: 1 4. Hybridisation design: ChIP analysis: comparison of ChIP fraction with SUP (supernatant) fraction 5. Quality control: Duplication, confirmation using different tags, different subunits of the same complex, and different yeast strain backgrounds (W303, BY4741, and SK1). Checking of the ChIP fraction by Western blotting. Checking amount of mRNA by RT-PCR. 6. URL of supplemental website: GEO Accession number: GSE1461 Web site: http://chromosomedynamics.bio.titech.ac.jp Samples used, extract preparation and labeling: 1. Origin of the biological sample Budding yeast (Saccharomyces cerevisiae) and fission yeast (Schizosaccharomyces pombe) 2. Manipulation of the samples and the protocols used: a. Mitotic budding yeast cells were synchronised in G1 with alpha-factor (2uM) and then released at 23ÂºC into medium containing 200 mM HU or 7.5 ug/ml Nocodazole for 60 min and 150 min, respectively. scc2-4 cells were shifted to 37ÂºC 60 min before alpha-factor release. Heat-shock treatment has been done at 37ÂºC for 15 minutes. b. Meiotic budding yeast cells were collected 4 hours after meiosis induction at 23ÂºC. c. Mitotic fission yeast cells were grown logarithmically in minimum medium (MM). Cells were fixed over night in 1% formaldehyde at 4ÂºC. 3. Protocols for preparing extracts: a. ChIP analysis: Extract preparation was processed following the Shirahige lab protocol (http://chromosomedynamics.bio.titech.ac.jp ). 5x10^8 cells were disrupted using Multi-Beads Shocker (MB400U, YASUI KIKAI, Osaka). Whole cell extract was sonicated to obtain 400-600 bp genomic DNA fragments. Anti-HA monoclonal antibody (clone 16B12, CRP Inc., Denver, PA) and anti-Flag monoclonal antibody M2 (Sigma-Aldrich Co., St Louis, MO) coupled to Dynabeads (Dynal, protein A Dynabeads) were used for chromatin immunoprecipitation. The immunprecipates were eluted and incubated over night at 65ÂºC to reverse the cross-link. Immunoprecipitated genomic DNA was incubated with proteinase K, extracted 2 times with phenol/chloroform/isoamylalcohol, precipitated, resuspended in TE and incubated with RnaseA. The DNA was then purified using the Qiagen PCR purification kit, and concentrated by ethanol precipitation. The DNA was amplified by PCR after random priming. 10 ug of amplified DNA was digested with Dnase I to a mean size of 100 bp. After Dnase I inactivation at 95ÂºC, fragments were labelled as detailled below. b. Gene expression analysis: Total RNA was prepared using FastRNA Pro Red Kit (BIO 101 Systems) according to the manufacturerâs instructions. 10 ug of total RNA was reverse transcribed according to the protocol recommended by Affymetrix. In vitro transcription was performed on 1 ug of cDNA. cRNA was cleaned and fragmented by heating. 20 ug of fragmented cRNA were hybridised. 4. Labelling protocol DNA fragments were end-labelled by addition of 25 U of Terminal Transferase and 1 nmol Biotin-N6ddATP (NEN) for 1 hour at 37ÂºC as previously described by Winzeler et al. (Science. 281, 1194-1197, 1998). The entire sample was used for hybridization. Hybridization procedures and parameters: Hybridization, blocking and washing were carried out as previously described (http://chromosomedynamics.bio.titech.ac.jp). Each sample was hybridized to the array in 150 ul containing 6xSSPE; 0.005% TritonX-100; 15 ug fragmented denatured salmon sperm DNA (Gibco-BRL); 1 nmole 3âbiotin labelled control oligonucleotide (oligo B2, Affymetrix). Samples were denatured at 100ÂºC for 10 minutes, and then put on ice before being hybridized for 16 hours at 42ÂºC in an hybridization oven (GeneChip Hybri. Oven 320, Affymetrix). Washing and scanning protocol (FlexMidi-euk2v3-450) provided by Affymetrix was performed automatically on a fluidics station (GeneChip fluidics station 400, Affymetrix). Measurement data and specifications: S. cerevisiae arrays were scanned using the HP GeneArray Scanner (Affymetrix) at an emission wavelength of 560 nm, resolution 7.5 uM. S. pombe arrays were scanned by GeneChip Scanner 3000 (Affymetrix) at an emission wavelength of 570 nm, resolution 2.5 uM. Grids were aligned to scans following the library array description. Primary data analyses were carried out using Affymetrix Microarray Suite Ver.5.0 software to obtain signal intensity, fold change value, change p-value and detection p-value. The detailed information of this analysis is available at http://www.affymetrix.com/support/technical/whitepapers/sadd_whitepaper.pdf and http://www.affymetrix.com/support/technical/technotes/statistical_reference_guide.pdf To discriminate significant signals for binding to DNA (dark grey signals), signals from the ChIP fraction scan were compared to the SUP (supernatant) fraction scan using the 3 following criteria: first, the signal reliability was judged by the detection p-value of each locus (p-value â¤0.025); secondly, reliability of binding ratio was judged by change p-value (p-value â¤0.025); thirdly, only clusters of at least 3 contiguous loci responding to the 2 previous criteria were selected as significantly enriched locus. The light grey signals represent the statistically not significantly enriched signals. The software to present the result (chr6viewer) is available at http://everythingchromovi.gsc.riken.go.jp. The raw and transformed data files are available at GEO database website and at our web site http://chromosomedynamics.bio.titech.ac.jp. Array Design 1. General array design: in situ synthesized arrays by Affymetrix 2. Availability of arrays: commercially available from Affymetrix 3. Location and ID of each spot on arrays: available at our web site (http://chromosomedynamics.bio.titech.ac.jp) and from Affymetrix on request 4. Probe type: oligonucleotide 5. The arrays used in this study can be purchased from Affymetrix: Chromosome VI S.cerevisiae: rikDACF, P/N# 510636 Chromosome III,IV,V S.cerevisiae: SC3456a520015F, P/N# 520015 Chromosome II,III S.pombe: S_pombea520106F, P/N# 520106 YGS98 GeneChipsT oligonucleotide arrays: P/N# 900256 Keywords = Yeast Cohesin Condensin Loading Distribution Keywords: other

Project description:This series is a supplementary data set for the manuscript titled "Postreplicative recruitment of Cohesin to double-strand breaks is required for DNA repair" All data shown in the paper plus duplicate experiments were registered (15 ChIP-chip data). Experimental design: 1. Type of experiment: ChIP (Chromatin immunoprecipitation) analysis hybridized to high density oligonucleotide arrays. The S. cerevisiae chromosome VI array described by Katou et al. (2003) Nature 424, 1078-83 and the newly developed S. cerevisiae chromosomes III-VIa have been used. 2. Experimental factors: Distribution of the sister chromatid cohesion protein Scc1, before and after induction of a DNA double strand break (dsb) on chromosome III, V and VI in G2/metaphase cells were analysed (Benomyl arrested cells). 3. Number of hybridizations performed: ChIP analysis: 15 4. Hybridisation design: ChIP analysis: comparison of ChIP fraction with SUP (supernatant) fraction 5. Quality control: Duplication of experiments, confirmation of recruitment of the analysed protein to a dsb by induction of breaks at three different positions in the genome. Mock hybridisation of samples immunoprecipitated from cells containing no tag recognized by antibody used. Checking of the ChIP fraction by Western blotting. 6. URL of supplemental website: GEO Accession number: GSE1905 Web site: http://chromosomedynamics.bio.titech.ac.jp Samples used, extract preparation and labeling: 1. Origin of the biological sample Budding yeast (Saccharomyces cerevisiae). 2. Manipulation of the samples and the protocols used: Mitotic budding yeast cells were synchronised in G2/M with Benomyl (80 ug/ml) Cells were fixed 30 minutes at room temperature plus over night in 1% formaldehyde at 4C. 3. Protocols for preparing extracts: ChIP analysis: Extract preparation was processed following the Shirahige lab protocol (http://chromosomedynamics.bio.titech.ac.jp ). 5x10^8 cells were disrupted using Multi-Beads Shocker (MB400U, YASUI KIKAI, Osaka). Whole cell extract was sonicated to obtain 400-600 bp genomic DNA fragments. Anti-Flag monoclonal antibody M2 (Sigma-Aldrich Co., St Louis, MO) coupled to Dynabeads (Dynal, protein A Dynabeads) were used for chromatin immunoprecipitation. The immunprecipates were eluted and incubated over night at 65Â¨Â¬C to reverse the cross-link. Immunoprecipitated genomic DNA was incubated with proteinase K, extracted 2 times with phenol/chloroform/isoamylalcohol, precipitated, resuspended in TE and incubated with RnaseA. The DNA was then purified using the Qiagen PCR purification kit, and concentrated by ethanol precipitation. The DNA was amplified by PCR after random priming. 10 ug of amplified DNA was digested with Dnase I to a mean size of 100 bp. After Dnase I inactivation at 95Â¨Â¬C, fragments were labelled as detailed below. 4. Labeling protocol DNA fragments were end-labeled by addition of 25 U of Terminal Transferase and 1 nmol Biotin-N6ddATP (NEN) for 1 hour at 37C as previously described by Winzeler et al. (Science. 281, 1194-1197, 1998). The entire sample was used for hybridization. 5. Hybridization procedures and parameters: Hybridization, blocking and washing were carried out as previously described (http://chromosomedynamics.bio.titech.ac.jp). Each sample was hybridized to the array in 150 ul containing 6xSSPE; 0.005% TritonX-100; 15 ug fragmented denatured salmon sperm DNA (Gibco-BRL); 1 nmole 3â??biotin labelled control oligonucleotide (oligo B2, Affymetrix). Samples were denatured at 100C for 10 minutes, and then put on ice before being hybridized for 16 hours at 42C in an hybridization oven (GeneChip Hybri. Oven 320, Affymetrix). Washing and scanning protocol (FlexMidi-euk2v3-450) provided by Affymetrix was performed automatically on a fluidics station (GeneChip fluidics station 400, Affymetrix). 6. Measurement data and specifications: S. cerevisiae arrays were scanned using the HP GeneArray Scanner (Affymetrix) at an emission wavelength of 560 nm, resolution 7.5 uM. Grids were aligned to scans following the library array description. Primary data analyses were carried out using Affymetrix Microarray Suite Ver.5.0 software to obtain signal intensity, fold change value, change p-value and detection p-value. The detailed information of this analysis is available at http://www.affymetrix.com/support/technical/whitepapers/sadd_whitepaper.pdf and http://www.affymetrix.com/support/technical/technotes/statistical_reference_ guide.pdf To discriminate significant signals for binding to DNA (dark grey signals), signals from the ChIP fraction scan were compared to the SUP (supernatant) fraction scan using the 3 following criteria: first, the signal reliability was judged by the detection p-value of each locus (p-value <=0.025); secondly, reliability of binding ratio was judged by change p-value (p- value <=0.025); thirdly, only clusters of at least 3 contiguous loci responding to the 2 previous criteria were selected as significantly enriched locus. The light grey signals represent the statistically not significantly enriched signals. The software to present the result (chr6viewer) is available at http://everythingchromovi.gsc.riken.go.jp. The raw and transformed data files are available at GEO database website and at our web site http://chromosomedynamics.bio.titech.ac.jp. 6. Array Design 1. General array design: in situ synthesized arrays by Affymetrix 2. Availability of arrays: commercially available from Affymetrix 3. Location and ID of each spot on arrays: available at our web site (http://chromosomedynamics.bio.titech.ac.jp) and from Affymetrix on request 4. Probe type: oligonucleotide 5. The arrays used in this study can be purchased from Affymetrix: Chromosome VI S.cerevisiae: rikDACF, P/N# 510636 Chromosome III,IV,V,VIa S.cerevisiae: SC3456a520015F, P/N# 520015 Keywords: other

Project description:Segregation of homologous maternal and paternal centromeres to opposite poles during meiosis I depends on post-replicative crossing over between homologous non-sister chromatids, which creates chiasmata and therefore bivalent chromosomes. Destruction of sister chromatid cohesion along chromosome arms due to proteolytic cleavage of cohesin's Rec8 subunit by separase resolves chiasmata and thereby triggers the first meiotic division. This produces univalent chromosomes, the chromatids of which are held together by centromeric cohesin that has been protected from separase by shugoshin (Sgo1/MEI-S332) proteins. Here we show in both fission and budding yeast that Sgo1 recruits to centromeres a specific form of protein phosphatase 2A (PP2A). Its inactivation causes loss of centromeric cohesin at anaphase I and random segregation of sister centromeres at the second meiotic division. Artificial recruitment of PP2A to chromosome arms prevents Rec8 phosphorylation and hinders resolution of chiasmata. Our data are consistent with the notion that efficient cleavage of Rec8 requires phosphorylation of cohesin and that this is blocked by PP2A at meiosis I centromeres. Keywords: ChIP-chip, Mitosis, Meiosis, Cell cycle, Saccharomyces cerevisiae, Chromosome VI tiling array, Sgo1, Pp2A, Cse4, Ndc10, Rts1, Rec8 â?¢ Experimental factors Distribution of Cse4, Ndc10, Rts1 in mitotic G2 phase and meiosis I (S. cerevisiae). Distribution of Rec8 in meiosis I (S.cerevisiae). All experiments were performed in cells with the same genetic background (Saccharomyces cerevisiae SK1). â?¢ Experimental design ChIP analysis: In all cases, hybridization data for ChIP fraction was compared with SUP (supernatant) fraction. SUP fraction is same as WCE fraction. â?¢ Quality control steps taken Duplication, confirmation using different tags, and different subunits of the same complex. Confirmation of protein distribution using deletion mutant strain. Confirmation of several loci by q-PCR. Checking of the ChIP fraction by Western blotting. Checking of the ChIP fraction by swapping SUP fraction. Samples used, extract preparation and labelling: â?¢ The origin of each biological sample Saccharomyces cerevisiae (SK1) . â?¢ Manipulation of biological samples and protocols used Chromatin immunoprecipitation (ChIP) and hybridization to Affimetrix high-density oligonucleotide arrays of S. cerevisiae chromosome VI was performed essentially as previously described (Katou et al., 2003, nature) (Lengronne et al., 2004, nature). â?¢ Technical protocols for preparing the hybridization extract The chromatin-immunprecipates were eluted and incubated over night at 65ÂºC to reverse the cross-link. Immunoprecipitated genomic DNA was incubated with proteinase K, extracted 2 times with phenol/chloroform/isoamylalcohol, precipitated, resuspended in TE and incubated with RnaseA. The DNA was then purified using the Qiagen PCR purification kit, and concentrated by ethanol precipitation. The DNA was amplified by PCR after random priming. 10 ug of amplified DNA was digested with Dnase I to a mean size of 100 bp. After Dnase I inactivation at 95ÂºC. DNA fragments were end-labeled by addition of 25 U of Terminal Transferase and 1 nmol Biotin-N6ddATP (NEN) for 1 hour at 37ÂºC as previously described by Winzeler et al. (Science. 281, 1194-1197, 1998). The entire sample was used for hybridization. â?¢ Hybridization procedures and parameters: Hybridization, blocking and washing were carried out as previously described (http://everythingchromosomevi.gsc.riken.go.jp). Each sample was hybridized to the array in 150 ul containing 6xSSPE; 0.005% TritonX-100; 15 ug fragmented denatured salmon sperm DNA (Gibco-BRL); 1 nmole 3â??biotin labelled control oligonucleotide (oligo B2, Affymetrix). Samples were denatured at 100ÂºC for 10 minutes, and then put on ice before being hybridized for 16 hours at 42ÂºC in a hybridization oven (GeneChip Hybridization Oven 640, Affymetrix). Washing and scanning protocol provided by Affymetrix was performed automatically on a fluidics station (GeneChip fluidics station 450, Affymetrix). â?¢ Measurement data and specifications: Arrays were scanned using the Genechip Scanner3000 7G following the library array description. All the raw data files can be downloaded from GEO database. The primary analysis of tiling chip data was performed following exactly the statistical algorithm used for Affymetrix GeneChip Operating Software (GCOS). The detailed information for the algorithm used can be downloaded from the Affymetrix web site at http://www.affymetrix.com/support/technical/technotes/statistical_reference_guide.pdf. The analysis is available on request. For the ChrVI array, one unit for analysis (locus) was set to 300bp. Fold change value, change p-value, and detection p-value for each locus were obtained by primary analysis. For the discrimination of positive and negative signals for the binding, we used three criteria as follows. First, the reliability of the signal strength was judged by detection p-value of each locus (p-valueâ?¤0.025 for cerevisiae). Secondly, reliability of binding ratio was judged by change p-value (p-valueâ?¤0.025 for cerevisiae). Thirdly, clusters consisting of at least 900bp contiguous loci that satisfied the above two criteria were selected, because it is known that a single site of protein-DNA interaction resulted in immuno-precipitation of DNA fragments that hybridized not only to the locus of the actual binding site but also to its neighbors. â?¢ Array Design: General array design: in situ synthesized arrays by Affymetrix Availability of arrays: commercially available from Affymetrix Location and ID of each spot on arrays: available from Affymetrix on request Probe type: oligonucleotide The arrays used in this study can be purchased from Affymetrix: Chromosome VI S.cerevisiae: rikDACFC6, P/N# 510636

Project description:The segregation of maternal centromeres away from the paternal ones during the first division of meiosis depends on the attachment of sister kinetochores to microtubules emanating from the same spindle pole. In budding yeast monopolar attachment requires the recruitment to kinetochores of a protein complex called monopolin. The biochemical function of monopolin was unknown. Here, we have identified the casein kinase I Hrr25 as a hitherto unknown subunit of monopolin. Hrr25 differs from other monopolin components by its enzymatic activity and strong evolutionary conservation. We demonstrate that Hrr25âs kinase activity and its interaction with monopolin are both required for monopolar attachment. Accordingly, Hrr25 is associated with centromeres in meiosis I. Our results revealed a surprising new role for casein kinases and provide a hypothesis for the mechanism of monopolar attachment during meiosis I in sexually reproducing organisms: casein kinase I-dependent phosphorylation of kinetochore proteins. Keywords: ChIP-chip, Meiosis, Cell cycle, Saccharomyces cerevisiae, Chromosome VI tiling array, Hrr25, Mam1 â¢ Experimental factors Distribution of the Hrr25 and Mam1 at Meiosis I. Distribution of Hrr25 in Mam1 deletion mutant (S.cerevisiae). All experiments were performed in cells with the same genetic background (Saccharomyces cerevisiae SK1). â¢ Experimental design ChIP analysis: In all cases, hybridization data for ChIP fraction was compared with that of SUP (supernatant) fraction. Cerevisiae chromosome VI array was used. â¢ Quality control steps taken Confirmation using different subunits of the same complex. Confirmation of protein distribution using deletion mutant strain. Checking of the ChIP fraction by Western blotting. Mock hybridisation of samples immunoprecipitated from cells containing no tag recognized by antibody used. Swapping SUP fraction. Q-PCR. Samples used, extract preparation and labelling: â¢ The origin of each biological sample Saccharomyces cerevisiae (SK1). â¢ Manipulation of biological samples and protocols used Chromatin immunoprecipitation (ChIP) and hybridization to Affimetrix high-density oligonucleotide arrays of S. cerevisiae chromosome VI were performed essentially as previously described (Katou et al., 2003, nature) (Lengronne et al., 2004, nature). â¢ Technical protocols for preparing the hybridization extract The chromatin-immunprecipates were eluted and incubated over night at 65ÂºC to reverse the cross-link. Immunoprecipitated genomic DNA was incubated with proteinase K, extracted 2 times with phenol/chloroform/isoamylalcohol, precipitated, resuspended in TE and incubated with RnaseA. The DNA was then purified using the Qiagen PCR purification kit, and concentrated by ethanol precipitation. The DNA was amplified by PCR after random priming. 10 ug of amplified DNA was digested with Dnase I to a mean size of 100 bp. After Dnase I inactivation at 95ÂºC. DNA fragments were end-labeled by addition of 25 U of Terminal Transferase and 1 nmol Biotin-N6ddATP (NEN) for 1 hour at 37ÂºC as previously described by Winzeler et al. (Science. 281, 1194-1197, 1998). The entire sample was used for hybridization. â¢ Hybridization procedures and parameters: Hybridization, blocking and washing were carried out as previously described (http://everythingchromosomevi.gsc.riken.go.jp). Each sample was hybridized to the array in 150 ul containing 6xSSPE; 0.005% TritonX-100; 15 ug fragmented denatured salmon sperm DNA (Gibco-BRL); 1 nmole 3âbiotin labelled control oligonucleotide (oligo B2, Affymetrix). Samples were denatured at 100ÂºC for 10 minutes, and then put on ice before being hybridized for 16 hours at 42ÂºC in a hybridization oven (GeneChip Hybridization Oven 640, Affymetrix). Washing and scanning protocol provided by Affymetrix was performed automatically on a fluidics station (GeneChip fluidics station 450, Affymetrix). â¢ Measurement data and specifications: Arrays were scanned using the Genechip Scanner3000 7G following the library array description. All the raw data files can be downloaded from GEO database. The primary analysis of tiling chip data was performed following exactly the statistical algorithm used for Affymetrix GeneChip Operating Software (GCOS). The detailed information for the algorithm used can be downloaded from the Affymetrix web site at http://www.affymetrix.com/support/technical/technotes/statistical_reference_guide.pdf. The analysis is available on request. For the ChrVI array, one unit for analysis (locus) was set to 300bp. Fold change value, change p-value, and detection p-value for each locus were obtained by primary analysis. For the discrimination of positive and negative signals for the binding, we used three criteria as follows. First, the reliability of the signal strength was judged by detection p-value of each locus (p-valueâ¤0.025). Secondly, reliability of binding ratio was judged by change p-value (p-valueâ¤0.025). Thirdly, clusters consisting of at least 900bp contiguous loci that satisfied the above two criteria were selected, because it is known that a single site of protein-DNA interaction resulted in immuno-precipitation of DNA fragments that hybridized not only to the locus of the actual binding site but also to its neighbors. â¢ Array Design: General array design: in situ synthesized arrays by Affymetrix Availability of arrays: commercially available from Affymetrix Location and ID of each spot on arrays: available from Affymetrix on request Probe type: oligonucleotide The arrays used in this study can be purchased from Affymetrix: Chromosome VI S.cerevisiae: rikDACFC6, P/N# 510636

Project description:Cohesin is a multisubunit complex that mediates sister-chromatid cohesion. Its Smc1 and Smc3 subunits possess ABC-like ATPases at one end of 50 nm long coiled coils. At the other ends are pseudosymmetrical hinge domains that interact to create V-shaped Smc1/Smc3 heterodimers. N- and C-terminal domains within cohesin's kleisin subunit Scc1 bind to Smc3 and Smc1 ATPase heads respectively, thereby creating a huge tripartite ring. It has been suggested that cohesin associates with chromosomes by trapping DNA within its ring. Opening of the ring due to cleavage of Scc1 by separase destroys sister-chromatid cohesion and triggers anaphase. We show that cohesin's hinges are not merely dimerization domains. They are essential for cohesin's association with chromosomes, which is blocked by artificially holding hinge domains together but not by preventing Scc1's dissociation from SMC ATPase heads. Our results suggest that entry of DNA into cohesin's ring requires transient dissociation of Smc1 and Smc3 hinge domains. Keywords: Cohesin loading, Scc1, Smc1, Smc3, Hinge opening, ChIP-chip â?¢ Experimental factors Distribution of the mutant and wild type form of cohesin in mitotic G2 phase. â?¢ Experimental design ChIP analysis: In all cases, hybridization data for ChIP fraction was compared with SUP (supernatant) fraction. SUP fraction is equal to WCE (Whole Cell Extract) fraction. Essentially WCE or SUP fraction of any cell cycle phase can be used for normalization, and there was no effect on protein binding profiles. Cerevisiae chromosome VI array was used. â?¢ Quality control steps taken Confirmation using different tags. Confirmation by q-PCR. Checking of the ChIP fraction by Western blotting. Mock hybridisation of samples immuno-precipitated from cells containing no tag recognized by antibody used. Samples used, extract preparation and labelling: â?¢ The origin of each biological sample Saccharomyces cerevisiae (W303). â?¢ Manipulation of biological samples and protocols used Chromatin immunoprecipitation (ChIP) and hybridization to Affimetrix high-density oligonucleotide arrays of S. cerevisiae chromosome VIwere performed essentially as previously described (Katou et al., 2003, nature) (Lengronne et al., 2004, nature). â?¢ Technical protocols for preparing the hybridization extract The chromatin-immunprecipates were eluted and incubated over night at 65ÂºC to reverse the cross-link. Immunoprecipitated genomic DNA was incubated with proteinase K, extracted 2 times with phenol/chloroform/isoamylalcohol, precipitated, resuspended in TE and incubated with RnaseA. The DNA was then purified using the Qiagen PCR purification kit, and concentrated by ethanol precipitation. The DNA was amplified by PCR after random priming. 10 ug of amplified DNA was digested with Dnase I to a mean size of 100 bp. After Dnase I inactivation at 95ÂºC. DNA fragments were end-labeled by addition of 25 U of Terminal Transferase and 1 nmol Biotin-N6ddATP (NEN) for 1 hour at 37ÂºC as previously described by Winzeler et al. (Science. 281, 1194-1197, 1998). The entire sample was used for hybridization. â?¢ Hybridization procedures and parameters: Hybridization, blocking and washing were carried out as previously described (Lengronne et al. Nature 2004). Each sample was hybridized to the array in 150 ul containing 6xSSPE; 0.005% TritonX-100; 15 ug fragmented denatured salmon sperm DNA (Gibco-BRL); 1 nmole 3â??biotin labelled control oligonucleotide (oligo B2, Affymetrix). Samples were denatured at 100ÂºC for 10 minutes, and then put on ice before being hybridized for 16 hours at 42ÂºC in a hybridization oven (GeneChip Hybridization Oven 640, Affymetrix). Washing and scanning protocol provided by Affymetrix was performed automatically on a fluidics station (GeneChip fluidics station 450, Affymetrix). â?¢ Measurement data and specifications: Arrays were scanned using the Genechip Scanner3000 7G following the library array description. All the cel files data and processed data files can be downloaded from GEO database. The primary analysis of tiling chip data was performed following exactly the statistical algorithm used for Affymetrix GeneChip Operating Software (GCOS). The detailed information for the algorithm used can be downloaded from the Affymetrix web site. The analysis is available on request. For the ChrVI array, one unit for analysis (locus) was set to 300bp. Fold change value, change p-value, and detection p-value for each locus were obtained by primary analysis. For the discrimination of positive and negative signals for the binding, we used three criteria as follows. First, the reliability of the signal strength was judged by detection p-value of each locus (p-valueâ?¤0.025). Secondly, reliability of binding ratio was judged by change p-value (p-valueâ?¤0.025). Thirdly, clusters consisting of at least 900bp contiguous loci that satisfied the above two criteria were selected, because it is known that a single site of protein-DNA interaction resulted in immuno-precipitation of DNA fragments that hybridized not only to the locus of the actual binding site but also to its neighbors. â?¢ Array Design: General array design: in situ synthesized arrays by Affymetrix Availability of arrays: commercially available from Affymetrix Location and ID of each spot on arrays: available from Affymetrix on request Probe type: oligonucleotide The arrays used in this study can be purchased from Affymetrix: Chromosome VI S.cerevisiae: rikDACFC6, P/N# 510636

Project description:BACKGROUND: Cells undergoing meiosis perform two consecutive divisions after a single round of DNA replication. During the first meiotic division, homologous chromosomes segregate to opposite poles. This is achieved by (1) the pairing of maternal and paternal chromosomes via recombination producing chiasmata, (2) coorientation of homologous chromosomes such that sister chromatids attach to the same spindle pole, and (3) resolution of chiasmata by proteolytic cleavage by separase of the meiotic-specific cohesin Rec8 along chromosome arms. Crucially, cohesin at centromeres is retained to allow sister centromeres to biorient at the second division. Little is known about how these meiosis I-specific events are regulated. RESULTS: Here, we show that Spo13, a centromere-associated protein produced exclusively during meiosis I, is required to prevent sister kinetochore biorientation by facilitating the recruitment of the monopolin complex to kinetochores. Spo13 is also required for the reaccumulation of securin, the persistence of centromeric cohesin during meiosis II, and the maintenance of a metaphase I arrest induced by downregulation of the APC/C activator CDC20. CONCLUSION: Spo13 is a key regulator of several meiosis I events. The presence of Spo13 at centromere-surrounding regions is consistent with the notion that it plays a direct role in both monopolin recruitment to centromeres during meiosis I and maintenance of centromeric cohesion between the meiotic divisions. Spo13 may also limit separase activity after the first division by ensuring securin reaccumulation and, in doing so, preventing precocious removal from chromatin of centromeric cohesin. Keywords: Meiosis, Cell cycle, Saccharomyces cerevisiae, Chromosome VI tiling array, Spo13, ChIP-chip â¢ Experimental factors Distribution of the Spo13 at Meiosis I. Experiment was performed in Saccharomyces cerevisiae SK1 strain. â¢ Experimental design ChIP analysis: Hybridization data for ChIP fraction was compared with that of SUP (supernatant) fraction. Cerevisiae chromosome VI array was used. â¢ Quality control steps taken Checking of the ChIP fraction by Western blotting. Mock hybridisation of samples immunoprecipitated from cells containing no tag recognized by antibody used. Sup swapping. Samples used, extract preparation and labelling: â¢ The origin of each biological sample Saccharomyces cerevisiae (SK1). â¢ Manipulation of biological samples and protocols used Chromatin immunoprecipitation (ChIP) and hybridization to Affimetrix high-density oligonucleotide arrays of S. cerevisiae chromosome VIwere performed essentially as previously described (Katou et al., 2003, nature) (Lengronne et al., 2004, nature). â¢ Technical protocols for preparing the hybridization extract The chromatin-immunprecipates were eluted and incubated over night at 65ÂºC to reverse the cross-link. Immunoprecipitated genomic DNA was incubated with proteinase K, extracted 2 times with phenol/chloroform/isoamylalcohol, precipitated, resuspended in TE and incubated with RnaseA. The DNA was then purified using the Qiagen PCR purification kit, and concentrated by ethanol precipitation. The DNA was amplified by PCR after random priming. 10 ug of amplified DNA was digested with Dnase I to a mean size of 100 bp. After Dnase I inactivation at 95ÂºC. DNA fragments were end-labeled by addition of 25 U of Terminal Transferase and 1 nmol Biotin-N6ddATP (NEN) for 1 hour at 37ÂºC as previously described by Winzeler et al. (Science. 281, 1194-1197, 1998). The entire sample was used for hybridization. â¢ Hybridization procedures and parameters: Hybridization, blocking and washing were carried out as previously described (Lengronne et al. Nature 2004). Each sample was hybridized to the array in 150 ul containing 6xSSPE; 0.005% TritonX-100; 15 ug fragmented denatured salmon sperm DNA (Gibco-BRL); 1 nmole 3âbiotin labelled control oligonucleotide (oligo B2, Affymetrix). Samples were denatured at 100ÂºC for 10 minutes, and then put on ice before being hybridized for 16 hours at 42ÂºC in a hybridization oven (GeneChip Hybridization Oven 640, Affymetrix). Washing and scanning protocol provided by Affymetrix was performed automatically on a fluidics station (GeneChip fluidics station 450, Affymetrix). â¢ Measurement data and specifications: Arrays were scanned using the Genechip Scanner3000 7G following the library array description. All the cel files data and processed data files can be downloaded from GEO database. The primary analysis of tiling chip data was performed following exactly the statistical algorithm used for Affymetrix GeneChip Operating Software (GCOS). The detailed information for the algorithm used can be downloaded from the Affymetrix web site. The analysis is available on request. For the ChrVI array, one unit for analysis (locus) was set to 300bp. Fold change value, change p-value, and detection p-value for each locus were obtained by primary analysis. For the discrimination of positive and negative signals for the binding, we used three criteria as follows. First, the reliability of the signal strength was judged by detection p-value of each locus (p-valueâ¤0.025). Secondly, reliability of binding ratio was judged by change p-value (p-valueâ¤0.0025). Thirdly, clusters consisting of at least 900bp contiguous loci that satisfied the above two criteria were selected, because it is known that a single site of protein-DNA interaction resulted in immuno-precipitation of DNA fragments that hybridized not only to the locus of the actual binding site but also to its neighbors. â¢ Array Design: General array design: in situ synthesized arrays by Affymetrix Availability of arrays: commercially available from Affymetrix Location and ID of each spot on arrays: available from Affymetrix on request Probe type: oligonucleotide The arrays used in this study can be purchased from Affymetrix: Chromosome VI S.cerevisiae: rikDACFC6, P/N# 510636 GSM108198 was used for normalization of GSM108511.

Dataset Information

Distribution of different proteins related to sister chromatid cohesion during the cell cycle.

Dataset's files

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets