Benchmarking dataset for measurement and removal of index hopping artifacts in multiplexed droplet-based single-cell RNA-seq data
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
PROVIDER: GSE149087 | GEO | 2020/05/09
REPOSITORIES: GEO
Similar Datasets
Project description:Data independent acquisition (DIA) has become a well-established method in LC-MS driven proteomics. Nonetheless, there are still a lot of possibilities at the data analysis level. By benchmarking different DIA analysis workflows through a ground truth sample mimicking real differential abundance samples, consisting of a differential spike-in of UPS2 in a constant yeast background, we provide a roadmap for DIA data analysis of shotgun samples based on whether sensitivity, precision or accuracy is of the essence. Three different commonly used DIA software tools (DIA-NN, EncyclopeDIA and SpectronautTM) were tested in both spectral library mode and spectral library free mode. In spectral library mode we used the independent spectral library prediction tools Prosit and MS2PIP together with DeepLC, next to the classical DDA-based spectral libraries. In total we benchmarked 12 DIA workflows. DIA-NN in library free mode or using in silico predicted libraries shows the highest sensitivity maintaining a high reproducibility and accuracy.
2024-05-06 | PXD044981 | Pride
Project description:The goals of this study are to determine tissue composition of human lung organoids (hLOs) when maintained long-term (day 230). hLOs consist of alveolar epithelial cells, mesenchymal/endothelial cells, smooth muscle cells and immune cells. After dissociated hLOs, a target capture of 1x 104 cells was performed using the 10X Genomics Chromium Single Cell RNA sequencing. Briefly, single cell gel bead-in-emulsions(GEMs) are generated by passing cells with enzyme mix, partitioning oil, and barcoded gel beads by 10X Chromium chip. After GEM formation, the gel bead is dissolved and co-partitioned cell is lysed. Subsequently, reverse transcription (RT) occurs inside GEMs and barcoded full-length cDNA is generated. After RT, amplified cDNAs with barcode sequences (cell index and UMI) are pooled and single cell library is constructed using the Single Cell 3` Reagent Kit (v3 chemistry). The resulting library was sequenced on illumina HiseqX platform with 150bp paired end. Raw base calling files generated by illumine sequencing were demultiplexed based on the sample index read to generate FASTQ files using the 10X Genomics Cell Ranger (v3.0.2) pipeline. The raw reads were trimmed from the 3’ end to get the recommended number of cycle for read pairs (read1: 28bp; read2 : 91bp). The trimmed reads were mapped to the hg38 reference human genome with subsequent analysis, including filtering, barcode counting, and UMI counting. The resulting data were used to generate the multidimensional feature-barcode matrix using the CellRanger count with default parameters.
2020-01-03 | GSE142838 | GEO
Project description:The quality of RNA sequencing data relies on specific priming by the primer used for reverse transcription (RT-primer). Non-specific annealing of the RT-primer to the RNA template can generate reads with incorrect cDNA ends and can cause misinterpretation of data (RT mispriming). This kind of artifact in RNA-seq based technologies is underappreciated and currently no adequate tools exist to computationally remove them from published datasets. We show that mispriming can occur with as little as 2 bases of complementarity at the 3' end of the primer followed by intermittent regions of complementarity. We propose an experimental solution to avoid RT-mispriming by performing RNA-seq using thermostable group II intron derived reverse transcriptase (TGIRT-seq).
2018-06-26 | GSE85163 | GEO
Project description:Purpose: We aimed to dissect function of Medicago truncutula homeodomain finger protein, MtPHD6 in Arabidopsis Methods: A total amount of 3 μg RNA was used for generation of sequencing libraries using NEBNext® Ultra™ RNA Library Prep Kit for Illumina® (NEB, USA) following manufacturer’s recommendations and index codes were added to attribute sequences to each sample. After cluster generation, the library preparations were sequenced on an Illumina Hiseq platform and 125 bp/150 bp paired-end reads were generated. Clean reads were obtained by removing low quality reads, reads containing adapter and ploy-N from raw data. At the same time, Q20, Q30 and GC content the clean data were calculated. Index of the Arabidopsis genome was built using Bowtie v2.2.3 and paired-end clean reads were aligned to the reference genome using TopHat v2.0.12. HTSeq v0.6.1 was used to count the reads numbers mapped to each gene. And then FPKM (Fragments Per Kilobase of transcript sequence per Millions base pairs sequenced) of each gene was calculated based on the length of the gene and reads count mapped to this gene. Differential expression analysis of drought stress versus control condition was performed using the DESeq R package (1.18.0). Results:In total, four samples with three biological replicates per genotype/treatment combination were used for RNA sequencing analysis. At least 2 G clean bases were generated for each sample. Comparative analysis revealed different networks which were modulated by drought stress and MtPHD6 transgene in Arabidopsis seedlings
2020-01-08 | GSE134945 | GEO
Project description:Purpose: We aimed to compare transcriptomic changes after melatonin (MT) and IAA treatments in Arabidopsis and dissected cross-talk between MT and IAA Methods: A total amount of 1 μg RNA was used for generation of sequencing libraries using NEBNext® Ultra™ RNA Library Prep Kit for Illumina® (NEB, USA) following manufacturer’s recommendations and index codes were added to attribute sequences to each sample. After cluster generation, the library preparations were sequenced on an Illumina Hiseq2000 platform and paired-end reads were generated. Clean reads were obtained by removing low quality reads, reads containing adapter and ploy-N from raw data. At the same time, Q20, Q30 and GC content the clean data were calculated. Index of the Arabidopsis genome was built using Bowtie v2.2.3 and paired-end clean reads were aligned to the reference genome using TopHat v2.0.12. HTSeq v0.6.1 was used to count the reads numbers mapped to each gene. And then FPKM (Fragments Per Kilobase of transcript sequence per Millions base pairs sequenced) of each gene was calculated based on the length of the gene and reads count mapped to this gene. Differential expression analysis of drought stress versus control condition was performed using the DESeq R package (1.18.0). Results:In total, six samples with two biological replicates per genotype/treatment combination were used for RNA sequencing analysis. At least 2 G clean bases were generated for each sample. Comparative analysis identified coregulated genes by melatonin and IAA in Arabidopsis seedlings
2021-12-21 | GSE152813 | GEO
Project description:Purpose: We aimed to dissect heat response of bermudagrass and identify heat stress responsive genes. Methods: A total amount of 3 µg RNA was used for generation of sequencing libraries using NEBNext® Ultra™ RNA Library Prep Kit for Illumina® (NEB, USA) following manufacturer’s recommendations and index codes were added to attribute sequences to each sample. After cluster generation, the library preparations were sequenced on an Illumina Hiseq platform and 125 bp/150 bp paired-end reads were generated. Clean reads were obtained by removing low quality reads, reads containing adapter and ploy-N from raw data. At the same time, Q20, Q30 and GC content the clean data were calculated. Index of the Arabidopsis genome was built using Bowtie v2.2.3 and paired-end clean reads were aligned to the reference genome using TopHat v2.0.12. HTSeq v0.6.1 was used to count the reads numbers mapped to each gene. And then FPKM (Fragments Per Kilobase of transcript sequence per Millions base pairs sequenced) of each gene was calculated based on the length of the gene and reads count mapped to this gene. Differential expression analysis of drought stress versus control condition was performed using the DESeq R package (1.18.0). Results:In total, six samples with two biological replicates per genotype/treatment combination were used for RNA sequencing analysis. At least 2 G clean bases were generated for each sample. Comparative analysis identified genes modulated by short term heat (2h) and long term heat (12h) treatments.
2021-12-21 | GSE136182 | GEO
Project description:Purpose: We aimed to compare transcriptomic changes after high concentration melatonin treatment in Arabidopsis Methods: A total amount of 3 μg RNA was used for generation of sequencing libraries using NEBNext® Ultra™ RNA Library Prep Kit for Illumina® (NEB, USA) following manufacturer’s recommendations and index codes were added to attribute sequences to each sample. After cluster generation, the library preparations were sequenced on an Illumina Hiseq platform and 125 bp/150 bp paired-end reads were generated. Clean reads were obtained by removing low quality reads, reads containing adapter and ploy-N from raw data. At the same time, Q20, Q30 and GC content the clean data were calculated. Index of the Arabidopsis genome was built using Bowtie v2.2.3 and paired-end clean reads were aligned to the reference genome using TopHat v2.0.12. HTSeq v0.6.1 was used to count the reads numbers mapped to each gene. And then FPKM (Fragments Per Kilobase of transcript sequence per Millions base pairs sequenced) of each gene was calculated based on the length of the gene and reads count mapped to this gene. Differential expression analysis of drought stress versus control condition was performed using the DESeq R package (1.18.0). Results:In total, eight samples with two biological replicates per genotype/treatment combination were used for RNA sequencing analysis. At least 2 G clean bases were generated for each sample. Comparative analysis revealed different networks which were modulated by melatonin and IAA in Arabidopsis seedlings
2021-12-21 | GSE139595 | GEO
Project description:Purpose: We aimed to dissect transcriptomic responses of Tulipa gesneriana during petal senescence and characterize function of senescence related genes. Methods: A total amount of 3 µg RNA was used for generation of sequencing libraries using NEBNext® Ultra™ RNA Library Prep Kit for Illumina® (NEB, USA) following manufacturer’s recommendations and index codes were added to attribute sequences to each sample. After cluster generation, the library preparations were sequenced on an Illumina Hiseq platform and 125 bp/150 bp paired-end reads were generated. Clean reads were obtained by removing low quality reads, reads containing adapter and ploy-N from raw data. At the same time, Q20, Q30 and GC content the clean data were calculated. Index of the Arabidopsis genome was built using Bowtie v2.2.3 and paired-end clean reads were aligned to the reference genome using TopHat v2.0.12. HTSeq v0.6.1 was used to count the reads numbers mapped to each gene. And then FPKM (Fragments Per Kilobase of transcript sequence per Millions base pairs sequenced) of each gene was calculated based on the length of the gene and reads count mapped to this gene. Differential expression analysis between each two different stages was performed using the DESeq R package (1.18.0). Results:In total, 15 samples with three biological replicates per stage combination were used for RNA sequencing analysis. At least 6 G clean bases were generated for each sample. Comparative analysis identified genes involved in flower development and/or fllower senescence.
2022-11-02 | GSE136183 | GEO
Project description:Purpose: We aimed to compare transcriptomic changes after melatonin (MT) and IAA treatments in Arabidopsis and dissected cross-talk between MT and IAA Methods: A total amount of 1 μg RNA was used for generation of sequencing libraries using NEBNext® Ultra™ RNA Library Prep Kit for Illumina® (NEB, USA) following manufacturer’s recommendations and index codes were added to attribute sequences to each sample. After cluster generation, the library preparations were sequenced on an Illumina Hiseq2000 platform and paired-end reads were generated. Clean reads were obtained by removing low quality reads, reads containing adapter and ploy-N from raw data. At the same time, Q20, Q30 and GC content the clean data were calculated. Index of the Arabidopsis genome was built using Bowtie v2.2.3 and paired-end clean reads were aligned to the reference genome using TopHat v2.0.12. HTSeq v0.6.1 was used to count the reads numbers mapped to each gene. And then FPKM (Fragments Per Kilobase of transcript sequence per Millions base pairs sequenced) of each gene was calculated based on the length of the gene and reads count mapped to this gene. Differential expression analysis of drought stress versus control condition was performed using the DESeq R package (1.18.0). Results:In total, six samples with two biological replicates per genotype/treatment combination were used for RNA sequencing analysis. At least 2 G clean bases were generated for each sample. Comparative analysis identified coregulated genes by melatonin and IAA in Arabidopsis seedlings
2021-08-11 | GSE167524 | GEO
Project description:Human ovarian adenocarcinoma SKOV3 cells were exposed to BPA (10 or 100 nM) or 0.1% DMSO for 24 h,and then total RNA was extracted from cells using Trizol reagent. Sequencing libraries were generated using NEBNext UltraTM RNA Library Prep Kit for Illumina (NEB) following manufacturer’s recommendations and index codes were added to attribute sequences to each sample. Then, the index-coded samples were clustered on a cBot Cluster Generation System using TruSeq PE Cluster Kit v3-cBot-HS (Illumina) according to the manufacturer’s instructions. After cluster generation, the library preparations were sequenced on an Illumina Hisreq 4000 platform with 150 bp paired-end reads.
2018-05-04 | E-MTAB-6295 | biostudies-arrayexpress