Open chromatin defined by DNaseI and FAIRE identifies regulatory elements that shape cell-type identity [ChIP_seq].
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
PROVIDER: GSE30226 | GEO | 2011/06/29
REPOSITORIES: GEO
Similar Datasets
Project description:The human body contains thousands of unique cell types, each with specialized functions. Cell identity is governed in large part by gene transcription programs, which are determined by regulatory elements encoded in DNA. To identify regulatory elements active in seven cell lines representative of diverse human cell types, we used DNase-seq and FAIRE-seq to map âopen chromatinâ. Over 870,000 DNaseI or FAIRE sites, which correspond largely to nucleosome depleted regions (NDRs), were identified across the seven cell lines, covering nearly 9% of the genome. The combination of DNaseI and FAIRE is more effective than either assay alone in identifying likely regulatory elements, as judged by coincidence with transcription factor binding locations determined in the same cells. Open chromatin common to all seven cell types tended to be at or near transcription start sites and encompassed more CTCF binding sites, while open chromatin sites found in only one cell type were typically located away from transcription start sites, and contained DNA motifs recognized by regulators of cell-type identity. As one example of its ability to identify functional DNA, we show that open chromatin regions bound by CTCF are potent insulators. We identified clusters of open regulatory elements (COREs) that were physically near each other and whose appearance was coordinated among one or more cell types. Gene expression and RNA Pol II binding data support the hypothesis that COREs control gene activity required for the maintenance of cell-type identity. This publicly available atlas of regulatory elements may prove valuable in identifying non-coding DNA sequence variants that are causally linked to human disease. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2011-06-29 | GSE30225 | GEO
Project description:The human body contains thousands of unique cell types, each with specialized functions. Cell identity is governed in large part by gene transcription programs, which are determined by regulatory elements encoded in DNA. To identify regulatory elements active in seven cell lines representative of diverse human cell types, we used DNase-seq and FAIRE-seq to map âopen chromatinâ. Over 870,000 DNaseI or FAIRE sites, which correspond largely to nucleosome depleted regions (NDRs), were identified across the seven cell lines, covering nearly 9% of the genome. The combination of DNaseI and FAIRE is more effective than either assay alone in identifying likely regulatory elements, as judged by coincidence with transcription factor binding locations determined in the same cells. Open chromatin common to all seven cell types tended to be at or near transcription start sites and encompassed more CTCF binding sites, while open chromatin sites found in only one cell type were typically located away from transcription start sites, and contained DNA motifs recognized by regulators of cell-type identity. As one example of its ability to identify functional DNA, we show that open chromatin regions bound by CTCF are potent insulators. We identified clusters of open regulatory elements (COREs) that were physically near each other and whose appearance was coordinated among one or more cell types. Gene expression and RNA Pol II binding data support the hypothesis that COREs control gene activity required for the maintenance of cell-type identity. This publicly available atlas of regulatory elements may prove valuable in identifying non-coding DNA sequence variants that are causally linked to human disease. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2011-06-29 | GSE30224 | GEO
Project description:The human body contains thousands of unique cell types, each with specialized functions. Cell identity is governed in large part by gene transcription programs, which are determined by regulatory elements encoded in DNA. To identify regulatory elements active in seven cell lines representative of diverse human cell types, we used DNase-seq and FAIRE-seq to map M-CM-"M-BM-^@M-BM-^\open chromatinM-CM-"M-BM-^@M-BM-^]. Over 870,000 DNaseI or FAIRE sites, which correspond largely to nucleosome depleted regions (NDRs), were identified across the seven cell lines, covering nearly 9% of the genome. The combination of DNaseI and FAIRE is more effective than either assay alone in identifying likely regulatory elements, as judged by coincidence with transcription factor binding locations determined in the same cells. Open chromatin common to all seven cell types tended to be at or near transcription start sites and encompassed more CTCF binding sites, while open chromatin sites found in only one cell type were typically located away from transcription start sites, and contained DNA motifs recognized by regulators of cell-type identity. As one example of its ability to identify functional DNA, we show that open chromatin regions bound by CTCF are potent insulators. We identified clusters of open regulatory elements (COREs) that were physically near each other and whose appearance was coordinated among one or more cell types. Gene expression and RNA Pol II binding data support the hypothesis that COREs control gene activity required for the maintenance of cell-type identity. This publicly available atlas of regulatory elements may prove valuable in identifying non-coding DNA sequence variants that are causally linked to human disease. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf DNase-seq, FAIRE-seq, and ChIP-seq were performed on seven human cell lines: GM12878 (lymphoblastoid), K562 (leukemia), HepG2 (hepatocellular carcinoma), HelaS3 (cervical carcinoma), HUVEC (human umbilical vein endothelial cells), NHEK (keratinocytes), and H1-ES (embryonic stem cells). For each cell line, two or three replicates were independently grown and split into three, one for each of the three experimental methods. Control ChIP experiments were performed on five of the cell lines with NHEK and H1-ES being excluded due to lack of material.
2011-06-29 | E-GEOD-30224 | biostudies-arrayexpress
Project description:The human body contains thousands of unique cell types, each with specialized functions. Cell identity is governed in large part by gene transcription programs, which are determined by regulatory elements encoded in DNA. To identify regulatory elements active in seven cell lines representative of diverse human cell types, we used DNase-seq and FAIRE-seq to map M-CM-"M-BM-^@M-BM-^\open chromatinM-CM-"M-BM-^@M-BM-^]. Over 870,000 DNaseI or FAIRE sites, which correspond largely to nucleosome depleted regions (NDRs), were identified across the seven cell lines, covering nearly 9% of the genome. The combination of DNaseI and FAIRE is more effective than either assay alone in identifying likely regulatory elements, as judged by coincidence with transcription factor binding locations determined in the same cells. Open chromatin common to all seven cell types tended to be at or near transcription start sites and encompassed more CTCF binding sites, while open chromatin sites found in only one cell type were typically located away from transcription start sites, and contained DNA motifs recognized by regulators of cell-type identity. As one example of its ability to identify functional DNA, we show that open chromatin regions bound by CTCF are potent insulators. We identified clusters of open regulatory elements (COREs) that were physically near each other and whose appearance was coordinated among one or more cell types. Gene expression and RNA Pol II binding data support the hypothesis that COREs control gene activity required for the maintenance of cell-type identity. This publicly available atlas of regulatory elements may prove valuable in identifying non-coding DNA sequence variants that are causally linked to human disease. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf DNase-seq, FAIRE-seq, and ChIP-seq were performed on seven human cell lines: GM12878 (lymphoblastoid), K562 (leukemia), HepG2 (hepatocellular carcinoma), HelaS3 (cervical carcinoma), HUVEC (human umbilical vein endothelial cells), NHEK (keratinocytes), and H1-ES (embryonic stem cells). For each cell line, two or three replicates were independently grown and split into three, one for each of the three experimental methods. Control ChIP experiments were performed on five of the cell lines with NHEK and H1-ES being excluded due to lack of material.
2011-06-29 | E-GEOD-30226 | biostudies-arrayexpress
Project description:The human body contains thousands of unique cell types, each with specialized functions. Cell identity is governed in large part by gene transcription programs, which are determined by regulatory elements encoded in DNA. To identify regulatory elements active in seven cell lines representative of diverse human cell types, we used DNase-seq and FAIRE-seq to map M-CM-"M-BM-^@M-BM-^\open chromatinM-CM-"M-BM-^@M-BM-^]. Over 870,000 DNaseI or FAIRE sites, which correspond largely to nucleosome depleted regions (NDRs), were identified across the seven cell lines, covering nearly 9% of the genome. The combination of DNaseI and FAIRE is more effective than either assay alone in identifying likely regulatory elements, as judged by coincidence with transcription factor binding locations determined in the same cells. Open chromatin common to all seven cell types tended to be at or near transcription start sites and encompassed more CTCF binding sites, while open chromatin sites found in only one cell type were typically located away from transcription start sites, and contained DNA motifs recognized by regulators of cell-type identity. As one example of its ability to identify functional DNA, we show that open chromatin regions bound by CTCF are potent insulators. We identified clusters of open regulatory elements (COREs) that were physically near each other and whose appearance was coordinated among one or more cell types. Gene expression and RNA Pol II binding data support the hypothesis that COREs control gene activity required for the maintenance of cell-type identity. This publicly available atlas of regulatory elements may prove valuable in identifying non-coding DNA sequence variants that are causally linked to human disease. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf DNase-seq, FAIRE-seq, and ChIP-seq were performed on seven human cell lines: GM12878 (lymphoblastoid), K562 (leukemia), HepG2 (hepatocellular carcinoma), HelaS3 (cervical carcinoma), HUVEC (human umbilical vein endothelial cells), NHEK (keratinocytes), and H1-ES (embryonic stem cells). For each cell line, two or three replicates were independently grown and split into three, one for each of the three experimental methods. Control ChIP experiments were performed on five of the cell lines with NHEK and H1-ES being excluded due to lack of material.
2011-06-29 | E-GEOD-30225 | biostudies-arrayexpress
Project description:These tracks display a synthesis of evidence from different assays as part of the four Open Chromatin track sets. This track displays open chromatin regions and/or transcription factor binding sites identified in multiple cell types by one or more complementary methodologies, DNaseI hypersensitivity (HS) (Duke DNaseI HS), Formaldehyde-Assisted Isolation of Regulatory Elements (FAIRE) (UNC FAIRE), and chromatin immunoprecipitation (ChIP) for select regulatory factors (UTA TFBS). Each methodology was performed on the same cell type using identical growth conditions. (Note: Data for some or all ChIP experiments may not be available for all cell types). Regions that overlap between methodologies identify regulatory elements that are cross-validated indicating high confidence regions. In addition, multiple lines of evidence suggest that regions detected by a single assay (e.g., DNase-only or FAIRE-only) are also biologically relevant (Song et al., submitted). DNaseI HS data: DNaseI is an enzyme that has long been used to map general chromatin accessibility, and DNaseI "hypersensitivity" is a feature of active cis-regulatory sequences.The use of this method has led to the discovery of functional regulatory elements that include promoters, enhancers, silencers, insulators, locus control regions, and novel elements. DNaseI hypersensitivity signifies chromatin accessibility following binding of trans-acting factors in place of a canonical nucleosome. FAIRE data: FAIRE (Formaldehyde Assisted Isolation of Regulatory Elements) is a method to isolate and identify nucleosome-depleted regions of the genome. FAIRE was initially discovered in yeast and subsequently shown to identify active regulatory elements in human cells (Giresi et al., 2007). Similar to DNaseI HS, FAIRE appears to identify functional regulatory elements that include promoters, enhancers, silencers, insulators, locus control regions and novel elements. ChIP data: ChIP (Chromatin Immunoprecipitation) is a method to identify the specific location of proteins that are directly or indirectly bound to genomic DNA. By identifying the binding location of sequence-specific transcription factors, general transcription machinery components, and chromatin factors, ChIP can help in the functional annotation of the open chromatin regions identified by DNaseI HS mapping and FAIRE. Input data: As a background control experiment, we sequenced the input genomic DNA sample that was used for ChIP. Crosslinked chromatin is sheared and the crosslinks are reversed without carrying out the immunoprecipitation step. This sample is otherwise processed in a manner identical to the ChIP sample as described below. The input track is useful in revealing potential artifacts arising from the sequence alignment process such as copy number differences between the reference genome and the sequenced samples, as well as regions of poor sequence alignability. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf For each site, the maximum F-Seq Density Signal value has been calculated for each assay that was performed in that cell type. F-Seq employs Parzen kernel density estimation to create base pair scores (Boyle et al., 2008b). Significant regions, or peaks, were determined by fitting the data to a gamma distribution to calculate p-values. Contiguous regions where p-values were below a 0.05 (DNaseI HS, ChIP) or 0.1 (FAIRE) threshold were considered significant. See assay specific description pages ( Duke DNaseI HS, UNC FAIRE and UTA TFBS) for more details. A Fisher's Combined P-value for DNaseI HS and FAIRE was calculated using Fisher's combined probability test. First, a test statistic is calculated using the formula x^2 = -2*sum(ln(pi)) where pi are the p-values calculated for DNaseI HS and FAIRE. X2 follows a chi-squared distribution, thus a combined p-value can be assigned to this test statistic.
2012-09-12 | E-GEOD-40833 | biostudies-arrayexpress
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Terry Furey mailto:tsfurey@duke.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). These tracks display DNaseI hypersensitivity (HS) evidence as part of the four Open Chromatin track sets. DNaseI is an enzyme that has long been used to map general chromatin accessibility, and DNaseI "hypersensitivity" is a feature of active cis-regulatory sequences. The use of this method has led to the discovery of functional regulatory elements that include promoters, enhancers, silencers, insulators, locus control regions, and novel elements. DNaseI hypersensitivity signifies chromatin accessibility following binding of trans-acting factors in place of a canonical nucleosome. Together with FAIRE and ChIP-seq experiments, these tracks display the locations of active regulatory elements identified as open chromatin in multiple cell types (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType) from the Duke, UNC-Chapel Hill, UT-Austin, and EBI ENCODE group. Within this project, open chromatin was identified using two independent and complementary methods: these DNaseI HS assays and Formaldehyde-Assisted Isolation of Regulatory Elements (FAIRE), combined with chromatin immunoprecipitation (ChIP) for select regulatory factors. DNaseI HS and FAIRE provide assay cross-validation with commonly identified regions delineating the highest confidence areas of open chromatin. ChIP assays provide functional validation and preliminary annotation of a subset of open chromatin sites. Each method employed Illumina (formerly Solexa) sequencing by synthesis as the detection platform. The Tier 1 and Tier 2 cell types were additional verified by a second platform, high-resolution 1% ENCODE tiled microarrays supplied by NimbleGen. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2011-10-14 | GSE32970 | GEO
Project description:These tracks display a synthesis of evidence from different assays as part of the four Open Chromatin track sets. This track displays open chromatin regions and/or transcription factor binding sites identified in multiple cell types by one or more complementary methodologies, DNaseI hypersensitivity (HS) (Duke DNaseI HS), Formaldehyde-Assisted Isolation of Regulatory Elements (FAIRE) (UNC FAIRE), and chromatin immunoprecipitation (ChIP) for select regulatory factors (UTA TFBS). Each methodology was performed on the same cell type using identical growth conditions. (Note: Data for some or all ChIP experiments may not be available for all cell types). Regions that overlap between methodologies identify regulatory elements that are cross-validated indicating high confidence regions. In addition, multiple lines of evidence suggest that regions detected by a single assay (e.g., DNase-only or FAIRE-only) are also biologically relevant (Song et al., submitted). DNaseI HS data: DNaseI is an enzyme that has long been used to map general chromatin accessibility, and DNaseI "hypersensitivity" is a feature of active cis-regulatory sequences.The use of this method has led to the discovery of functional regulatory elements that include promoters, enhancers, silencers, insulators, locus control regions, and novel elements. DNaseI hypersensitivity signifies chromatin accessibility following binding of trans-acting factors in place of a canonical nucleosome. FAIRE data: FAIRE (Formaldehyde Assisted Isolation of Regulatory Elements) is a method to isolate and identify nucleosome-depleted regions of the genome. FAIRE was initially discovered in yeast and subsequently shown to identify active regulatory elements in human cells (Giresi et al., 2007). Similar to DNaseI HS, FAIRE appears to identify functional regulatory elements that include promoters, enhancers, silencers, insulators, locus control regions and novel elements. ChIP data: ChIP (Chromatin Immunoprecipitation) is a method to identify the specific location of proteins that are directly or indirectly bound to genomic DNA. By identifying the binding location of sequence-specific transcription factors, general transcription machinery components, and chromatin factors, ChIP can help in the functional annotation of the open chromatin regions identified by DNaseI HS mapping and FAIRE. Input data: As a background control experiment, we sequenced the input genomic DNA sample that was used for ChIP. Crosslinked chromatin is sheared and the crosslinks are reversed without carrying out the immunoprecipitation step. This sample is otherwise processed in a manner identical to the ChIP sample as described below. The input track is useful in revealing potential artifacts arising from the sequence alignment process such as copy number differences between the reference genome and the sequenced samples, as well as regions of poor sequence alignability. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2012-09-12 | GSE40833 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Terry Furey mailto:tsfurey@duke.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). These tracks display a synthesis of evidence from different assays as part of the four Open Chromatin track sets. This track displays open chromatin regions and/or transcription factor binding sites identified in multiple cell types by one or more complementary methodologies, DNaseI hypersensitivity (HS) (Duke DNaseI HS), Formaldehyde-Assisted Isolation of Regulatory Elements (FAIRE) (UNC FAIRE), and chromatin immunoprecipitation (ChIP) for select regulatory factors (UTA TFBS). Each methodology was performed on the same cell type using identical growth conditions. (Note: Data for some or all ChIP experiments may not be available for all cell types). Regions that overlap between methodologies identify regulatory elements that are cross-validated indicating high confidence regions. In addition, multiple lines of evidence suggest that regions detected by a single assay (e.g., DNase-only or FAIRE-only) are also biologically relevant (Song et al., submitted). DNaseI HS data: DNaseI is an enzyme that has long been used to map general chromatin accessibility, and DNaseI "hypersensitivity" is a feature of active cis-regulatory sequences.The use of this method has led to the discovery of functional regulatory elements that include promoters, enhancers, silencers, insulators, locus control regions, and novel elements. DNaseI hypersensitivity signifies chromatin accessibility following binding of trans-acting factors in place of a canonical nucleosome. FAIRE data: FAIRE (Formaldehyde Assisted Isolation of Regulatory Elements) is a method to isolate and identify nucleosome-depleted regions of the genome. FAIRE was initially discovered in yeast and subsequently shown to identify active regulatory elements in human cells (Giresi et al., 2007). Similar to DNaseI HS, FAIRE appears to identify functional regulatory elements that include promoters, enhancers, silencers, insulators, locus control regions and novel elements. ChIP data: ChIP (Chromatin Immunoprecipitation) is a method to identify the specific location of proteins that are directly or indirectly bound to genomic DNA. By identifying the binding location of sequence-specific transcription factors, general transcription machinery components, and chromatin factors, ChIP can help in the functional annotation of the open chromatin regions identified by DNaseI HS mapping and FAIRE. Input data: As a background control experiment, we sequenced the input genomic DNA sample that was used for ChIP. Crosslinked chromatin is sheared and the crosslinks are reversed without carrying out the immunoprecipitation step. This sample is otherwise processed in a manner identical to the ChIP sample as described below. The input track is useful in revealing potential artifacts arising from the sequence alignment process such as copy number differences between the reference genome and the sequenced samples, as well as regions of poor sequence alignability. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf For each site, the maximum F-Seq Density Signal value has been calculated for each assay that was performed in that cell type. F-Seq employs Parzen kernel density estimation to create base pair scores (Boyle et al., 2008b). Significant regions, or peaks, were determined by fitting the data to a gamma distribution to calculate p-values. Contiguous regions where p-values were below a 0.05 (DNaseI HS, ChIP) or 0.1 (FAIRE) threshold were considered significant. See assay specific description pages ( Duke DNaseI HS, UNC FAIRE and UTA TFBS) for more details. A Fisher's Combined P-value for DNaseI HS and FAIRE was calculated using Fisher's combined probability test. First, a test statistic is calculated using the formula x^2 = -2*sum(ln(pi)) where pi are the p-values calculated for DNaseI HS and FAIRE. X2 follows a chi-squared distribution, thus a combined p-value can be assigned to this test statistic.
2011-10-25 | E-GEOD-33213 | biostudies-arrayexpress
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Terry Furey mailto:tsfurey@duke.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). These tracks display a synthesis of evidence from different assays as part of the four Open Chromatin track sets. This track displays open chromatin regions and/or transcription factor binding sites identified in multiple cell types by one or more complementary methodologies, DNaseI hypersensitivity (HS) (Duke DNaseI HS), Formaldehyde-Assisted Isolation of Regulatory Elements (FAIRE) (UNC FAIRE), and chromatin immunoprecipitation (ChIP) for select regulatory factors (UTA TFBS). Each methodology was performed on the same cell type using identical growth conditions. (Note: Data for some or all ChIP experiments may not be available for all cell types). Regions that overlap between methodologies identify regulatory elements that are cross-validated indicating high confidence regions. In addition, multiple lines of evidence suggest that regions detected by a single assay (e.g., DNase-only or FAIRE-only) are also biologically relevant (Song et al., submitted). DNaseI HS data: DNaseI is an enzyme that has long been used to map general chromatin accessibility, and DNaseI "hypersensitivity" is a feature of active cis-regulatory sequences.The use of this method has led to the discovery of functional regulatory elements that include promoters, enhancers, silencers, insulators, locus control regions, and novel elements. DNaseI hypersensitivity signifies chromatin accessibility following binding of trans-acting factors in place of a canonical nucleosome. FAIRE data: FAIRE (Formaldehyde Assisted Isolation of Regulatory Elements) is a method to isolate and identify nucleosome-depleted regions of the genome. FAIRE was initially discovered in yeast and subsequently shown to identify active regulatory elements in human cells (Giresi et al., 2007). Similar to DNaseI HS, FAIRE appears to identify functional regulatory elements that include promoters, enhancers, silencers, insulators, locus control regions and novel elements. ChIP data: ChIP (Chromatin Immunoprecipitation) is a method to identify the specific location of proteins that are directly or indirectly bound to genomic DNA. By identifying the binding location of sequence-specific transcription factors, general transcription machinery components, and chromatin factors, ChIP can help in the functional annotation of the open chromatin regions identified by DNaseI HS mapping and FAIRE. Input data: As a background control experiment, we sequenced the input genomic DNA sample that was used for ChIP. Crosslinked chromatin is sheared and the crosslinks are reversed without carrying out the immunoprecipitation step. This sample is otherwise processed in a manner identical to the ChIP sample as described below. The input track is useful in revealing potential artifacts arising from the sequence alignment process such as copy number differences between the reference genome and the sequenced samples, as well as regions of poor sequence alignability. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2011-10-25 | GSE33213 | GEO