CTCF Binding Sites by ChIP-seq from ENCODE/University of Washington
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
PROVIDER: GSE30263 | GEO | 2011/06/29
REPOSITORIES: GEO
Similar Datasets
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track was produced as part of the ENCODE Project. This track displays genome-wide maps of histone modifications in different cell lines (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType) using ChIP-seq high-throughput sequencing. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2012-06-07 | GSE35583 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track is produced as part of the ENCODE Project. This track shows DNaseI sensitivity measured genome-wide in different cell lines using the Digital DNaseI methodology (see below), and DNaseI hypersensitive sites. DNaseI has long been used to map general chromatin accessibility and DNaseI hypersensitivity is a universal feature of active cis-regulatory sequences. The use of this method has led to the discovery of functional regulatory elements that include enhancers, insulators, promotors, locus control regions and novel elements. For each experiment (cell type) this track shows DNaseI sensitivity as a continuous function using sequencing tag density (Raw Signal), and discrete loci of DNaseI sensitive zones (HotSpots) and hypersensitive sites (Peaks)." For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2011-06-03 | GSE29692 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track was produced as part of the mouse ENCODE Project. This track shows RNA-seq measured genome-wide in mouse tissues and cell lines (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType). Poly-A selected mRNA was used as the source for transcriptome profiling of tissues and cell types that also had corresponding DNase I hypersensitive profiles. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2012-07-20 | GSE39524 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track is produced as part of the ENCODE Project. This track shows DNaseI sensitivity measured genome-wide in different cell lines using the Digital DNaseI methodology (see below), and DNaseI hypersensitive sites. DNaseI has long been used to map general chromatin accessibility and DNaseI hypersensitivity is a universal feature of active cis-regulatory sequences. The use of this method has led to the discovery of functional regulatory elements that include enhancers, insulators, promotors, locus control regions and novel elements. For each experiment (cell type) this track shows DNaseI sensitivity as a continuous function using sequencing tag density (Raw Signal), and discrete loci of DNaseI sensitive zones (HotSpots) and hypersensitive sites (Peaks)." For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf Cells were grown according to the approved ENCODE cell culture protocols. Digital DNaseI was performed by DNaseI digestion of intact nuclei, isolating DNaseI 'double-hit' fragments as described in Sabo et al. (2006), and direct sequencing of fragment ends (which correspond to in vivo DNaseI cleavage sites) using the Solexa platform (36 bp reads). Uniquely mapping high-quality reads were mapped to the genome. DNaseI sensitivity is directly reflected in raw tag density (Raw Signal), which is shown in the track as density of tags mapping within a 150 bp sliding window (at a 20 bp step across the genome). DNaseI sensitive zones (HotSpots) were identified using the HotSpot algorithm described in Sabo et al. (2004). 1.0% false discovery rate thresholds (FDR 0.01) were computed for each cell type by applying the HotSpot algorithm to an equivalent number of random uniquely mapping 36mers. DNaseI hypersensitive sites (DHSs or Peaks) were identified as signal peaks within FDR 1.0% hypersensitive zones using a peak-finding algorithm.
2011-06-03 | E-GEOD-29692 | biostudies-arrayexpress
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track is produced as part of the ENCODE Project. This track displays maps of genome-wide binding of the CTCF transcription factor in different cell lines using ChIP-seq high-throughput sequencing For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf Cells were grown according to the approved ENCODE cell culture protocols. Cells were crosslinked with 1% formaldehyde, and the reaction was quenched by the addition of glycine. Fixed cells were rinsed with PBS, lysed in nuclei lysis buffer, and the chromatin was sheared to 200-500 bp fragments using Fisher Dismembrator (model 500). Sheared chromatin fragments were immunoprecipitated with specific polyclonal antibodies at 4 degrees C with gentle rotation. Antibody-chromatin complexes were washed and eluted. The cross linking in immunoprecipitated DNA was reversed and treated with RNase-A. Following proteinase K treatment, the DNA fragments were purified by phenol-chloroform-isoamyl alcohol extraction and ethanol precipitation. 20-50 ng of ChIP DNA was end-repaired, adenine ligated to Illumina adapters was added, and then a Solexa library was made for sequencing. ChIP-seq affinity is directly reflected in raw tag density (Raw Signal), which is shown in the track as density of tags mapping within a 150 bp sliding window (at a 20 bp step across the genome). ChIP-seq affinity zones (HotSpots) were identified using the HotSpot algorithm described in Sabo et al. (2004). 1.0% false discovery rate thresholds (FDR 0.01) were computed for each cell type by applying the HotSpot algorithm to an equivalent number of random uniquely mapping 36mers. ChIP-seq affinity (Peaks) were identified as signal peaks within FDR 1.0% hypersensitive zones using a peak-finding algorithm.
2011-06-29 | E-GEOD-30263 | biostudies-arrayexpress
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track is produced as part of the ENCODE Project. This track shows genome-wide assessment of DNA replication timing in cell lines using the sequencing-based "Repli-seq" methodology (see below). Replication timing is known to be an important feature for epigenetic control of gene expression that usually operates at a higher-order level than at the level of specific genes. For each experiment (cell line, replicate), replication timing was ascertained by the isolation and sequencing of newly replicated DNA from six cell cycle fractions: G1/G1b, S1, S2, S3, S4, G2 (six fraction profile). Replication patterns are visualized as a continuous function based on sequencing tag density (Percentage-normalized Signal) and as a wavelet-smoothed transform of the six fraction profile (Wavelet-smoothed Signal). Replication peaks corresponding to replication initiation zones (Peaks) and valleys corresponding to replication termination zones (Valleys) were determined from local maxima and minima, respectively, in the wavelet-smoothed signal data. A measure of relative copy number at each genomic location (Summed Densities) was determined by summing the normalized tag density values of each cell cycle fraction at that location (equals one replicated genome equivalent). For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2012-04-27 | GSE34399 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track was produced as part of the ENCODE Project. This track displays genome-wide maps of histone modifications in different cell lines (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType) using ChIP-seq high-throughput sequencing. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf Cells were grown according to the approved ENCODE cell culture protocols (http://hgwdev.cse.ucsc.edu/ENCODE/protocols/cell). Cells were cross-linked with 1% formaldehyde, and the reaction was quenched by the addition of glycine. Fixed cells were rinsed with PBS, lysed in nuclei lysis buffer, and the chromatin was sheared to 200-500 bp fragments using a Fisher Dismembrator (model 500). Sheared chromatin fragments were immunoprecipitated with specific polyclonal antibodies at 4 °C with gentle rotation. Antibody-chromatin complexes were washed and eluted. The cross-linking in the immunoprecipitated DNA was reversed and treated with RNase-A. Following proteinase K treatment, the DNA fragments were purified by phenol-chloroform-isoamyl alcohol extraction and ethanol precipitation. A quantity of 20-50 ng of ChIP DNA was end-repaired, followed by the addition of adenine, ligation to Illumina adapters, and creation of a Solexa library for sequencing. ChIP-seq affinity was directly measured through the raw tag density (Raw Signal), which is shown in the track as density of tags mapping within a 150 bp sliding window (at a 20 bp step across the genome). ChIP-seq affinity zones (HotSpots) were identified using the HotSpot algorithm described in Sabo et al. (2004). One percent false discovery rate thresholds (FDR 1.0%) were computed for each cell type by applying the HotSpot algorithm to an equivalent number of random uniquely mapping 36-mers. ChIP-Seq affinities (Peaks) were identified as signal peaks within FDR 1.0% hypersensitive zones using a peak-finding algorithm. All tracks have a False Discovery Rate of 1% (FDR 1.0%). Data were verified by sequencing biological replicates displaying a correlation coefficient > 0.9.
2012-06-07 | E-GEOD-35583 | biostudies-arrayexpress
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track, produced as part of the mouse ENCODE Project, contains deep sequencing DNase data that will be used to identify sites where regulatory factors bind to the genome (footprints). Footprinting is a technique used to define the DNA sequences that interact with and bind DNA-binding proteins, such as transcription factors, zinc-finger proteins, hormone-receptor complexes, and other chromatin-modulating factors like CTCF. The technique depends upon the strength and tight nature of protein-DNA interactions. In their native chromatin state, DNA sequences that interact directly with DNA-binding proteins are relatively protected from DNA degrading endonucleases, while the exposed/unbound portions are readily degraded by such endonucleases. A massively parallel next-generation sequencing technique to define the DNase hypersensitive sites in the genome was adopted. The DNase samples were sequenced using next-generation sequencing machines to significantly higher depths of 300-fold or greater. This produces a base-pair level resolution of the DNase susceptibility maps of the native chromatin state. These base-pair resolution maps represent and are dependent upon the nature and the specificity of interaction of the DNA with the regulatory/modulatory proteins binding at specific loci in the genome; thus they represent the native chromatin state of the genome under investigation. The deep sequencing approach has been used to define the footprint landscape of the genome by identifying DNA motifs that interact with known or novel DNA binding proteins.
2012-09-19 | GSE40869 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track, produced as part of the ENCODE Project, contains deep sequencing DNase data that will be used to identify sites where regulatory factors bind to the genome (footprints). Footprinting is a technique used to define the DNA sequences that interact with and bind DNA-binding proteins, such as transcription factors, zinc-finger proteins, hormone-receptor complexes, and other chromatin-modulating factors like CTCF. The technique depends upon the strength and tight nature of protein-DNA interactions. In their native chromatin state, DNA sequences that interact directly with DNA-binding proteins are relatively protected from DNA degrading endonucleases, while the exposed/unbound portions are readily degraded by such endonucleases. A massively parallel next-generation sequencing technique to define the DNase hypersensitive sites in the genome was adopted. Sequencing these next-generation-sequencing DNase samples to significantly higher depths of 300-fold or greater produces a base-pair level resolution of the DNase susceptibility maps of the native chromatin state. These base-pair resolution maps represent and are dependent upon the nature and the specificity of interaction of the DNA with the regulatory/modulatory proteins binding at specific loci in the genome; thus they represent the native chromatin state of the genome under investigation. The deep sequencing approach has been used to define the footprint landscape of the genome by identifying DNA motifs that interact with known or novel DNA binding proteins. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2010-12-29 | GSE26328 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track was produced as part of the mouse ENCODE Project. This track shows RNA-seq measured genome-wide in mouse tissues and cell lines (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType). Poly-A selected mRNA was used as the source for transcriptome profiling of tissues and cell types that also had corresponding DNase I hypersensitive profiles. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf Cells were grown according to the approved ENCODE cell culture protocols. Fresh tissues were harvested from mice and stored until used for preparing total RNA samples. The total RNA was used as starting material to select poly-A RNA and used for constructing SOLiD libraries according to the protocols supplied by the manufacturer. All RNA samples were spiked in with NIST standards before libraries were constructed. The RNA-seq libraries were sequenced on ABI SOLiD sequencing platform as 50-base reads according to the manufacturer's recommendations. Reads were aligned to the mm9 reference genome using ABI BioScope software version 1.2.1. Colorspace FASTQ format files were created using Heng Li's solid2fastq.pl script version 0.1.4 (Li et al., 2009a), representing 0, 1, 2, 3 color codes with the letters A, C, G, T respectively. Signal files were created from the BAM (Li et al., 2009b) alignments using BEDTools (Quinlan et al., 2010).
2012-07-20 | E-GEOD-39524 | biostudies-arrayexpress