Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track is produced as part of the ENCODE Project. This track shows DNaseI sensitivity measured genome-wide in different cell lines using the Digital DNaseI methodology (see below), and DNaseI hypersensitive sites. DNaseI has long been used to map general chromatin accessibility and DNaseI hypersensitivity is a universal feature of active cis-regulatory sequences. The use of this method has led to the discovery of functional regulatory elements that include enhancers, insulators, promotors, locus control regions and novel elements. For each experiment (cell type) this track shows DNaseI sensitivity as a continuous function using sequencing tag density (Raw Signal), and discrete loci of DNaseI sensitive zones (HotSpots) and hypersensitive sites (Peaks)." For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf Cells were grown according to the approved ENCODE cell culture protocols. Digital DNaseI was performed by DNaseI digestion of intact nuclei, isolating DNaseI 'double-hit' fragments as described in Sabo et al. (2006), and direct sequencing of fragment ends (which correspond to in vivo DNaseI cleavage sites) using the Solexa platform (36 bp reads). Uniquely mapping high-quality reads were mapped to the genome. DNaseI sensitivity is directly reflected in raw tag density (Raw Signal), which is shown in the track as density of tags mapping within a 150 bp sliding window (at a 20 bp step across the genome). DNaseI sensitive zones (HotSpots) were identified using the HotSpot algorithm described in Sabo et al. (2004). 1.0% false discovery rate thresholds (FDR 0.01) were computed for each cell type by applying the HotSpot algorithm to an equivalent number of random uniquely mapping 36mers. DNaseI hypersensitive sites (DHSs or Peaks) were identified as signal peaks within FDR 1.0% hypersensitive zones using a peak-finding algorithm.

Project description:This track is produced as part of the mouse ENCODE Project. This track shows DNaseI sensitivity measured genome-wide in mouse tissues and cell lines using the Digital DNaseI methodology (see below), and DNaseI hypersensitive sites. DNaseI has long been used to map general chromatin accessibility and DNaseI hypersensitivity is a universal feature of active cis-regulatory sequences. The use of this method has led to the discovery of functional regulatory elements that include enhancers, insulators, promotors, locus control regions and novel elements. For each experiment (tissue/cell type) this track shows DNaseI sensitivity as a continuous function using sequencing tag density (Signal), and discrete loci of DNaseI sensitive zones (HotSpots) and hypersensitive sites (Peaks). For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf Cells were grown according to the approved ENCODE cell culture protocols (http://hgwdev.cse.ucsc.edu/ENCODE/protocols/cell/mouse). Fresh tissues were harvested from mice and the nuclei prepared according to the tissue appropriate protocol (http://hgwdev.cse.ucsc.edu/ENCODE/protocols/cell/mouse). Digital DNaseI was performed by DNaseI digestion of intact nuclei, isolating DNaseI 'double-hit' fragments as described in Sabo et al. (2006), and direct sequencing of fragment ends (which correspond to in vivo DNaseI cleavage sites) using the Illumina IIx (and Illumina HiSeq by early 2011) platform (36 bp reads). Uniquely mapping high-quality reads were mapped to the genome using the bowtie aligner. DNaseI sensitivity is directly reflected in raw tag density, which is shown in the track as density of tags mapping within a 150 bp sliding window (at a 20 bp step across the genome). DNaseI sensitive zones (HotSpots) were identified using the HotSpot algorithm described in Sabo et al. (2004). 1.0% false discovery rate thresholds (FDR 0.01) were computed for each cell type by applying the HotSpot algorithm to an equivalent number of random uniquely mapping 36mers. DNaseI hypersensitive sites (DHSs or Peaks) were identified as signal peaks within FDR 1.0% hypersensitive zones using a peak-finding algorithm (I-max).

Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Ross Hardison mailto:rch8@psu.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). Rationale for the Mouse ENCODE project: Knowledge of the function of genomic DNA sequences comes from three basic approaches. Genetics uses changes in behavior or structure of a cell or organism in response to changes in DNA sequence to infer function of the altered sequence. Biochemical approaches monitor states of histone modification, binding of specific transcription factors, accessibility to DNases and other epigenetic features along genomic DNA. In general, these features are associated with gene activity, but the precise relationships remain to be established. The third approach is evolutionary, using comparisons among homologous DNA sequences to find segments that are evolving more slowly or more rapidly than expected given the local rate of neutral change. Such changes are inferred to be under negative or positive selection, respectively, and interpreted as DNA sequences needed for a preserved (negative selection) or adaptive (positive selection) function. The ENCODE project aims to discover all the DNA sequences associated with various epigenetic features, with the reasonable expectation that these will also be functional (best tested by genetic methods). However, it is not clear how to relate these results with those from evolutionary analyses. The mouse ENCODE project aims to make this connection explicitly and with a moderate breadth. Assays identical to those being used in the ENCODE project are performed in cell types in mouse that are similar or homologous to those studied in the human project. The comparison will be used to discover which epigenetic features are conserved between mouse and human, and examine the extent to which these overlap with the DNA sequences under negative selection. The contribution of functional DNA preserved in mammals versus function in only one species will be discovered. The results will have a significant impact on the understanding of the evolution of gene regulation. Maps of DNaseI Sensitivity: DNaseI has long been used to map general chromatin accessibility, and DNaseI hypersensitivity is a universal feature of active cis-regulatory sequences. Maps of DNaseI sensitivity measured genome-wide are generated through DNaseI digestion, addition of linkers at the sites of cleavage, and library prep followed by massively parallel short read sequencing on the Illumina GAIIx and HiSeq platforms. The sequence tags are mapped back to the mouse genome, and a graph of the smoothed kernel density of DNaseI cleavage sites is displayed as the "Signal" track. This provides a quantitative estimate of the frequency of cleavage by DNaseI in the initial digest, which in turn is related to the accessibility of the DNA in the chromatin. Segments of greatest cleavage site density represent DNase hypersensitive sites (DHSs) and are identified as peaks by the F-seq program (Boyle et al. 2008). DHSs are candidates for any cis-regulatory module, including promoters, enhancers, insulators, and novel elements. The sequence reads, quality scores, and alignment coordinates from these experiments are available for download. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf Cells were grown and harvested according to the approved ENCODE cell culture protocols (http://hgwdev.cse.ucsc.edu/ENCODE/protocols/cell/mouse) for G1E and G1E-ER4. DNaseI hypersensitive sites were isolated using methods called DNase-seq or DNase-chip (Song and Crawford, 2010). Briefly, cells were lysed with NP40, and intact nuclei were digested with optimal levels of DNaseI enzyme. DNaseI-digested ends were captured from three different DNase concentrations, and material was sequenced using Illumina sequencing. The read length for sequences from DNase-seq is 20 bases long due to a MmeI cutting step of the approximately 50 kb DNA fragments extracted after DNaseI digestion. Sequences from each experiment were mapped to the mouse genome (mm9 assembly) using the program Bowtie (http://bowtie-bio.sourceforge.net/index.shtml) (Langmead et al., 2009). Reads mapping to more than one location were not removed. For such reads, only the best mapping result was used ("--best" option). Sequences from multiple lanes were combined for a single replicate and converted to the sam/bam format using SAMtools (http://samtools.sourceforge.net/). Using F-seq, the resulting digital signal was converted to a continuous wiggle track that employs a Parzen kernel density estimation to create base pair scores (Boyle et al., 2008). Discrete DNaseI HS sites (peaks) were identified from the DNase-seq F-seq density signal. Significant regions were determined by fitting the data to a gamma distribution to calculate p-values.

Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track, produced as part of the ENCODE Project, contains deep sequencing DNase data that will be used to identify sites where regulatory factors bind to the genome (footprints). Footprinting is a technique used to define the DNA sequences that interact with and bind DNA-binding proteins, such as transcription factors, zinc-finger proteins, hormone-receptor complexes, and other chromatin-modulating factors like CTCF. The technique depends upon the strength and tight nature of protein-DNA interactions. In their native chromatin state, DNA sequences that interact directly with DNA-binding proteins are relatively protected from DNA degrading endonucleases, while the exposed/unbound portions are readily degraded by such endonucleases. A massively parallel next-generation sequencing technique to define the DNase hypersensitive sites in the genome was adopted. Sequencing these next-generation-sequencing DNase samples to significantly higher depths of 300-fold or greater produces a base-pair level resolution of the DNase susceptibility maps of the native chromatin state. These base-pair resolution maps represent and are dependent upon the nature and the specificity of interaction of the DNA with the regulatory/modulatory proteins binding at specific loci in the genome; thus they represent the native chromatin state of the genome under investigation. The deep sequencing approach has been used to define the footprint landscape of the genome by identifying DNA motifs that interact with known or novel DNA binding proteins. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf Cells were grown according to the approved ENCODE cell culture protocols. Digital DNaseI was performed by DNaseI digestion of intact nuclei, followed by isolating DNaseI 'double-hit' fragments as described in Sabo et al. (2006), and direct sequencing of fragment ends (which correspond to in vivo DNaseI cleavage sites) using the Solexa platform (27 bp reads). High-quality reads were mapped to the GRCh37/hg19 human genome using Bowtie 0.12.5 (Eland was used to map to NCBI36/hg18); only unique mappings were kept. DNaseI sensitivity is directly reflected in raw tag density (Signal), which is shown in the track as density of tags mapping within a 150 bp sliding window (at a 20 bp step across the genome). DNaseI hypersensitive zones (HotSpots) were identified using the HotSpot algorithm described in Sabo et al. (2004). False discovery rate thresholds of 1.0% (FDR 0.01) were computed for each cell type by applying the HotSpot algorithm to an equivalent number of random uniquely mapping 36-mers. DNaseI hypersensitive sites (DHSs or Peaks) were identified as signal peaks within 1.0% (FDR 0.01) hypersensitive zones using a peak-finding algorithm. Only DNase Solexa libraries from unique cell types producing the highest quality data, as defined by Percent Tags in Hotspots (PTIH ~40%) were designated for deep sequencing to a depth of over 200 million tags.

Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track, produced as part of the mouse ENCODE Project, contains deep sequencing DNase data that will be used to identify sites where regulatory factors bind to the genome (footprints). Footprinting is a technique used to define the DNA sequences that interact with and bind DNA-binding proteins, such as transcription factors, zinc-finger proteins, hormone-receptor complexes, and other chromatin-modulating factors like CTCF. The technique depends upon the strength and tight nature of protein-DNA interactions. In their native chromatin state, DNA sequences that interact directly with DNA-binding proteins are relatively protected from DNA degrading endonucleases, while the exposed/unbound portions are readily degraded by such endonucleases. A massively parallel next-generation sequencing technique to define the DNase hypersensitive sites in the genome was adopted. The DNase samples were sequenced using next-generation sequencing machines to significantly higher depths of 300-fold or greater. This produces a base-pair level resolution of the DNase susceptibility maps of the native chromatin state. These base-pair resolution maps represent and are dependent upon the nature and the specificity of interaction of the DNA with the regulatory/modulatory proteins binding at specific loci in the genome; thus they represent the native chromatin state of the genome under investigation. The deep sequencing approach has been used to define the footprint landscape of the genome by identifying DNA motifs that interact with known or novel DNA binding proteins. Cells were grown according to the approved ENCODE cell culture protocols (http://hgwdev.cse.ucsc.edu/ENCODE/protocols/cell/mouse). Digital DNaseI was performed by DNaseI digestion of intact nuclei, followed by isolating DNaseI "double-hit" fragments (Sabo et al., 2006), and direct sequencing of fragment ends (which correspond to in vivo DNaseI cleavage sites) using the Solexa platform (27 bp reads). High-quality reads were mapped to the NCBI37/mm9 mouse genome using Bowtie 0.12.5; only unique mappings were kept. DNaseI sensitivity is directly reflected in raw tag density (Raw Signal), which is shown in the track as density of tags mapping within a 150 bp sliding window (at a 20 bp step across the genome). DNaseI hypersensitive zones (HotSpots) were identified using the HotSpot algorithm (Sabo et al., 2004). False discovery rate thresholds of 1.0% (FDR 0.01) were computed for each cell type by applying the HotSpot algorithm to an equivalent number of random uniquely mapping 36-mers. DNaseI hypersensitive sites (DHSs or Peaks) were identified as signal peaks within 1.0% (FDR 0.01) hypersensitive zones using a peak-finding algorithm. Only DNase Solexa libraries from unique cell types producing the highest quality data, as defined by Percent Tags in Hotspots (PTIH ~40%), were designated for deep sequencing to a depth of over 200 million tags. Results were validated by conventional DNaseI hypersensitivity assays using end-labeling/Southern blotting methods.

Dataset Information

DNaseI/Array GM06990

Dataset's files

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets