Anaerobic transcriptional responses of Escherichia coli to NO under defined chemostat conditions.
Ontology highlight
ABSTRACT:
ORGANISM(S): Escherichia coli Escherichia coli K-12
PROVIDER: GSE5076 | GEO | 2006/09/01
SECONDARY ACCESSION(S): PRJNA104507
REPOSITORIES: GEO
Similar Datasets
Project description:Escherichia coli strains MG1655 and an isogenic norR::Tn5 mutant were grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 54 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. In order to establish anaerobic growth, nitrogen was sparged through the chemostat medium prior to inoculation and throughout the course of the experiment at a rate of 0.2 l/min. No dissolved oxygen was detectable using the OxyProbe. Sodium fumarate was added at a final concentration of 50 mM to act as a terminal electron acceptor. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 were added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each. Samples were taken after a period of 5 min exposure to NOC for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from Wild type and norR::Tn5 cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values Keywords: Mutant Comparison, stress response, nitric oxide, NorR, chemostat, continuous culture
2006-09-01 | GSE5084 | GEO
Project description:Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 54 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. In order to establish anaerobic growth, nitrogen was sparged through the chemostat medium prior to inoculation and throughout the course of the experiment at a rate of 0.2 l/min. No dissolved oxygen was detectable using the OxyProbe. Sodium fumarate was added to anaerobic medium at a final concentration of 50 mM to act as a terminal electron acceptor. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 were added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each, unless otherwise stated. Samples were taken immediately prior to the addition of NOCs and after a period of 5 min exposure to NOC for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagenâ??s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from control and NOC-supplemented cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values. Two biological repeats (ie. two chemostat runs) were grown. Control and exposed samples were taken as described in summary. For each chemostat run 2 hybridisations were performed. One in which the control was Cy3 labelled whilst the exposed was Cy5 labelled, and a dye swap.
2010-07-01 | E-GEOD-5076 | biostudies-arrayexpress
Project description:Escherichia coli strains MG1655 and an isogenic norR::Tn5 mutant were grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions.. Cells were grown in defined media containing 8 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. For aerobic growth, the air-flow rate was 1 l/min, and the dissolved oxygen tension was maintained at 40% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode and automated adjustment of stirring rate. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 was added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each unless stated otherwise. Samples were taken after a period of 5 min exposure to NOC for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from Wild type and norR::Tn5 cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values Keywords: Mutant Comparison, stress response, nitric oxide, NorR, chemostat, continuous culture
2006-09-01 | GSE5137 | GEO
Project description:Escherichia coli strains MG1655 and an isogenic hmp::Tn5 mutant were grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions.. Cells were grown in defined media containing 8 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. For aerobic growth, the air-flow rate was 1 l/min, and the dissolved oxygen tension was maintained at 40% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode and automated adjustment of stirring rate. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 was added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each unless stated otherwise. Samples were taken after a period of 5 min exposure to NOC for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from Wild type and hmp::Tn5 cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values Keywords: Mutant Comparison, stress response, nitric oxide, Hmp, chemostat, continuous culture
2006-09-01 | GSE5139 | GEO
Project description:Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 8 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. For aerobic growth, the air-flow rate was 1 l/min, and the dissolved oxygen tension was maintained at 40% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode and automated adjustment of stirring rate. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 was added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each unless stated otherwise. Samples were taken immediately prior to the addition of NOCs and after a period of 5 min exposure to NOCs for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from control and NOC-supplemented cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values. Keywords: Stress Reponse, Continuous culture, Chemostat, NO, Nitric oxide
2006-09-01 | GSE5075 | GEO
Project description:Escherichia coli strains MG1655 and an isogenic norR::Tn5 mutant were grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 54 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. In order to establish anaerobic growth, nitrogen was sparged through the chemostat medium prior to inoculation and throughout the course of the experiment at a rate of 0.2 l/min. No dissolved oxygen was detectable using the OxyProbe. Sodium fumarate was added at a final concentration of 50 mM to act as a terminal electron acceptor. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 were added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each. Samples were taken after a period of 5 min exposure to NOC for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from Wild type and norR::Tn5 cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values Each strain was grown twice in seperate chemostat runs, exposed to NO. Samples were hybridised as WT vs NorR::Tn5 and each hybridisation had a corresponding dye-swap performed.
2006-08-31 | E-GEOD-5084 | biostudies-arrayexpress
Project description:Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 54 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.2 h-1. In order to establish anaerobic growth, nitrogen was sparged through the chemostat medium prior to inoculation and throughout the course of the experiment at a rate of 0.2 l/min. No dissolved oxygen was detectable using the OxyProbe. Sodium fumarate was added to anaerobic medium at a final concentration of 50 mM to act as a terminal electron acceptor. Cells were grown as above to steady-state, At steady-state, GSNO was added to the chemostat culture and to the nutrient feed at a final concentration of 200 uM unless otherwise stated. Samples were taken immediately prior to the addition of GSNO and after a period of 5 min exposure to GSNO for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from control and GSNO-supplemented cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values. Keywords: dose response
2005-04-06 | GSE2129 | GEO
Project description:Escherichia coli strains MG1655 and an isogenic norR::Tn5 mutant were grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions.. Cells were grown in defined media containing 8 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. For aerobic growth, the air-flow rate was 1 l/min, and the dissolved oxygen tension was maintained at 40% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode and automated adjustment of stirring rate. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 was added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each unless stated otherwise. Samples were taken after a period of 5 min exposure to NOC for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from Wild type and norR::Tn5 cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values Keywords: Mutant Comparison, stress response, nitric oxide, NorR, chemostat, continuous culture Each strain was grown twice in seperate chemostat runs, exposed to NO. Samples were hybridised as WT vs NorR::Tn5 and each hybridisation had a corresponding dye-swap performed
2006-08-31 | E-GEOD-5137 | biostudies-arrayexpress
Project description:Escherichia coli strains MG1655 and an isogenic hmp::Tn5 mutant were grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions.. Cells were grown in defined media containing 8 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. For aerobic growth, the air-flow rate was 1 l/min, and the dissolved oxygen tension was maintained at 40% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode and automated adjustment of stirring rate. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 was added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each unless stated otherwise. Samples were taken after a period of 5 min exposure to NOC for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from Wild type and hmp::Tn5 cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values Keywords: Mutant Comparison, stress response, nitric oxide, Hmp, chemostat, continuous culture Each strain was grown twice in seperate chemostat runs, exposed to NO. Samples were hybridised as WT vs hmp::Tn5 and each hybridisation had a corresponding dye-swap performed
2006-08-31 | E-GEOD-5139 | biostudies-arrayexpress
Project description:Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 8 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. For aerobic growth, the air-flow rate was 1 l/min, and the dissolved oxygen tension was maintained at 40% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode and automated adjustment of stirring rate. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 was added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each unless stated otherwise. Samples were taken immediately prior to the addition of NOCs and after a period of 5 min exposure to NOCs for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagenâs RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from control and NOC-supplemented cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values. Two biological repeats (ie. two chemostat runs) were grown. Control and exposed samples were taken as described in summary. For each chemostat run 2 hybridisations were performed. One in which the control was Cy3 labelled whilst the exposed was Cy5 labelled, and a dye swap.
2010-07-01 | E-GEOD-5075 | biostudies-arrayexpress