Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Transcriptional profiling of Escherichia coli after addition of CORM-401 to aerobically and anaerobically growing cells

ABSTRACT: Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in Evans media containing 2 mM glucose as the sole and limiting source of energy and carbon. The working volume was 200 ml, and the dilution rate 0.2 h-1. For aerobic growth, the air-flow rate was 0.1 l/min, and the dissolved oxygen tension was maintained at ~7% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode. For anaerobic growth, cells are grown on 100 % nitrogen gas bubbled at 0.1 l/min Cells were grown as above to steady-state, At steady-state, CO gas was bubbled through the culture at 0.1L/min. Samples were taken immediately prior to the addition of CORM-401 and over a time course of 2.5, 5, 10, 20, 40 and 80 min exposure to CORM-401 for subsequent analysis using microarrays. Cells were harvested directly into phenol:ethanol to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers.

ORGANISM(S): Escherichia coli Escherichia coli str. K-12 substr. MG1655

PROVIDER: GSE71784 | GEO | 2017/05/31

SECONDARY ACCESSION(S): PRJNA292077

REPOSITORIES: GEO

ACCESS DATA

Json Xml

Dataset's files

Source:

			Action	DRS
		Other

Items per page:

1 - 1 of 1

Similar Datasets

Transcriptional profiling of Escherichia coli after addition of CORM-3 and iCORM-3 to aerobically and anaerobically growing cells

Project description:Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 2 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 200 ml, and the dilution rate 0.2 h-1. For aerobic growth, the air-flow rate was 0.1 l/min, and the dissolved oxygen tension was maintained at ~7% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode. For anaerobic growth, cells are grown on 100 % nitrogen gas bubbled at 0.1 l/min Cells were grown as above to steady-state, At steady-state, CORM-3 or iCORM-3 was added to the chemostat culture at a final concentration of 40 uM. Samples were taken immediately prior to the addition of CORM-3 or iCORM-3 and over a time course of 2.5, 5, 10, 20, 40 and 80 min exposure to (i)CORM-3 for subsequent analysis using microarrays. Cells were harvested directly into phenol:ethanol to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers.

2013-08-21 | GSE40811 | GEO

Transcriptional profiling of Escherichia coli after addition of CO gas to aerobically and anaerobically growing cells

Project description:Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in Evans media containing 2 mM glucose as the sole and limiting source of energy and carbon. The working volume was 200 ml, and the dilution rate 0.2 h-1. For aerobic growth, the air-flow rate was 0.1 l/min, and the dissolved oxygen tension was maintained at ~7% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode. For anaerobic growth, cells are grown on 100 % nitrogen gas bubbled at 0.1 l/min Cells were grown as above to steady-state, At steady-state, CO gas was bubbled through the culture at 0.1L/min. Samples were taken immediately prior to the addition of CO gas and over a time course of 2.5, 5, 10, 20, 40 and 80 min exposure to CO gas for subsequent analysis using microarrays. Cells were harvested directly into phenol:ethanol to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers.

2016-09-01 | GSE50713 | GEO

Transcriptional profiling of Escherichia coli after addition of CORM-3 and iCORM-3 to aerobically and anaerobically growing cells

Project description:Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 2 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 200 ml, and the dilution rate 0.2 h-1. For aerobic growth, the air-flow rate was 0.1 l/min, and the dissolved oxygen tension was maintained at ~7% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbeM-BM-. electrode. For anaerobic growth, cells are grown on 100 % nitrogen gas bubbled at 0.1 l/min Cells were grown as above to steady-state, At steady-state, CORM-3 or iCORM-3 was added to the chemostat culture at a final concentration of 40 uM. Samples were taken immediately prior to the addition of CORM-3 or iCORM-3 and over a time course of 2.5, 5, 10, 20, 40 and 80 min exposure to (i)CORM-3 for subsequent analysis using microarrays. Cells were harvested directly into phenol:ethanol to stabilize RNA, and total RNA was purified using QiagenM-bM-^@M-^Ys RNeasy Mini kit as recommended by the suppliers. Time course experiment with samples taken immediately prior to or 2.5, 5, 10, 20, 40 or 80 minutes after addition of either 40uM CORM-3 or iCORM-3 under either 0 or 100 % perceived aerobiosis. 2 biological repeats were performed for each condition with 2 technical (dye swap) repeats per biological repeat.

2013-08-21 | E-GEOD-40811 | biostudies-arrayexpress

Transcriptional profiling of Escherichia coli after addition of CO gas to aerobically and anaerobically growing cells

Project description:Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in Evans media containing 2 mM glucose as the sole and limiting source of energy and carbon. The working volume was 200 ml, and the dilution rate 0.2 h-1. For aerobic growth, the air-flow rate was 0.1 l/min, and the dissolved oxygen tension was maintained at ~7% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbeÂ® electrode. For anaerobic growth, cells are grown on 100 % nitrogen gas bubbled at 0.1 l/min Cells were grown as above to steady-state, At steady-state, CO gas was bubbled through the culture at 0.1L/min. Samples were taken immediately prior to the addition of CO gas and over a time course of 2.5, 5, 10, 20, 40 and 80 min exposure to CO gas for subsequent analysis using microarrays. Cells were harvested directly into phenol:ethanol to stabilize RNA, and total RNA was purified using Qiagenâ??s RNeasy Mini kit as recommended by the suppliers. Time course experiment with samples taken immediately prior to or 2.5, 5, 10, 20, 40 or 80 minutes after addition of CO gas under either 0 or 100 % perceived aerobiosis. 2 biological repeats were performed for the aerobic condition with 2 technical (dye swap) repeats per biological repeat, and three biological repeats were perfomed for the anaerobic condition with 2 technical (dye swap) repeats per biological repeat.

2016-09-01 | E-GEOD-50713 | biostudies-arrayexpress

Measuring the effects of hypoxia on transcription in Caulobacter crescentus

Project description:To test the effects of hypoxia on transcription in Caulobacter crescentus, we cultured cells in a New Brunswick bioreactor under controlled conditions. Prior to innoculation, the medium was bubbled with laboratory air at maximum flow and stirred at 300 rpm for 2 hours. After this period, the medium was considered saturated with air and the oxygen probe was set to 100%. Untreated cultures were grown in air-saturated complex medium at 30 degrees C to OD660=0.5 at pH=7 (continuous air-bubbling; 300 rpm stirring). At cell harvest in aerated culture, the dissolved oxygen probe remained above 98%. To subject cells to hypoxia, culture at OD660=0.5, pH=7 was sparged continuously with nitrogen gas; the dissolved oxygen level as measured by the gas probe dropped from 100% to 0% over the course of 5 minutes under this condition. Hypoxic cultures were continually stirred and bubbled with nitrogen for another 20 minutes after the dissolved gas probe read 0%. Hypoxic cells were then harvested for RNA isolation.

2010-06-21 | GSE21127 | GEO

Measuring the effects of hypoxia on transcription in Caulobacter crescentus

2010-06-21 | E-GEOD-21127 | biostudies-arrayexpress

Transcriptomic profiling of a heme-deficient mutant (hemA) of Escherichia coli after addition of CORM-3 and inactive CORM-3 (iCORM-3).

Project description:Wild type and hemA strains of Escherichia coli MG1655 were grown under anaerobiosis in batch culture in custom-made, stirred (200 rpm) 250 ml mini-fermenter vessels at 37 °C during continuous sparging with 100 % nitrogen gas. Cells were grown in defined medium (pH 7.0) containing 0.5 % glucose as the sole and limiting source of energy and carbon. The medium was supplemented with 0.1 % casamino acids and 5 % LB to support the growth of the hemA mutant. For maintenance of the hemA mutation, 50 mg/ml kanamycin were added to cultures of the heme-deficient mutant only. CORM-3 (final concentration of 100 uM) was added to wild type and mutant cultures at an OD600 of 0.2. iCORM-3 (final concentration of 100 uM) was added to only mutant cultures at an OD600 of 0.2. Samples were taken immediately prior to the addition of CORM-3 or iCORM-3 and at consecutive time-points thereafter (10, 20, 40, 60 and 120 min) for microarray analysis. Cells were harvested directly into phenol:ethanol to stabilise RNA and total RNA was purified using Qiagen’s RNeasy Mini Kit, according to the manufacturer's instructions.

2015-04-01 | GSE55097 | GEO

Transcriptomic profiling of a heme-deficient mutant (hemA) of Escherichia coli after addition of CORM-3 and inactive CORM-3 (iCORM-3).

2015-04-01 | E-GEOD-55097 | biostudies-arrayexpress

Aerobic NO-exposed Chemostat Comparison of Wt & hmp mutant Responses

Project description:Escherichia coli strains MG1655 and an isogenic hmp::Tn5 mutant were grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions.. Cells were grown in defined media containing 8 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. For aerobic growth, the air-flow rate was 1 l/min, and the dissolved oxygen tension was maintained at 40% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode and automated adjustment of stirring rate. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 was added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each unless stated otherwise. Samples were taken after a period of 5 min exposure to NOC for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from Wild type and hmp::Tn5 cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values Keywords: Mutant Comparison, stress response, nitric oxide, Hmp, chemostat, continuous culture

2006-09-01 | GSE5139 | GEO

Aerobic NO-exposed Chemostat Comparison of Wt & norR mutant Responses

Project description:Escherichia coli strains MG1655 and an isogenic norR::Tn5 mutant were grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions.. Cells were grown in defined media containing 8 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. For aerobic growth, the air-flow rate was 1 l/min, and the dissolved oxygen tension was maintained at 40% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode and automated adjustment of stirring rate. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 was added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each unless stated otherwise. Samples were taken after a period of 5 min exposure to NOC for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from Wild type and norR::Tn5 cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values Keywords: Mutant Comparison, stress response, nitric oxide, NorR, chemostat, continuous culture

2006-09-01 | GSE5137 | GEO

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data