Transcriptome profiling of purified mouse platelets
Ontology highlight
ABSTRACT:
ORGANISM(S): Mus musculus
PROVIDER: GSE75896 | GEO | 2016/04/16
SECONDARY ACCESSION(S): PRJNA305629
REPOSITORIES: GEO
Similar Datasets
Project description:Purpose: The aim of this study is to identify genes that are under the transcriptional control of the epigenetic modifier Smchd1 in mouse lymphoma cell lines. Methods: Total RNA was extracted using QIAGEN RNeasy Minikit from sorted lymphoma cell lines derived from mice either wild-type or null for Smchd1. 1µg total RNA was used to generate sequencing libraries for whole transcriptome analysis with Illumina’s TruSeq RNA Sample Preparation Kit v2 as per standard protocols. Libraries were sequenced on HiSeq 2000 with Illumina TruSeq SBS Kit v3-HS reagents as either 100 bp single-end or paired-end reads at the Australian Genome Research Facility (AGRF), Melbourne. Reads were aligned to the mouse reference genome mm10 and mapped to known genomic features at the gene level using the Rsubread package (version 1.10.5) (Liao et al. 2013). Mapped reads were then summarized into gene-level counts using FeatureCounts (Liao et al. 2014).
2015-03-13 | GSE64099 | GEO
Project description:Purpose: The aim of this study is to identify genes that are under the transcriptional control of the epigenetic regulator Smchd1 in neural stem cells (NSCs) derived from E14.5 mouse brain Methods: Total RNA was extracted using an AllPrep DNA/RNA Mini Kit (Qiagen) from cultured neural stem cells derived from male mouse E14.5 brains either wild-type or null for Smchd1. 1 µg total RNA was used to generate sequencing libraries for whole transcriptome analysis with Illumina’s TruSeq RNA Sample Preparation Kit v2 as per standard protocols. Libraries were sequenced on HiSeq 2000 with Illumina TruSeq SBS Kit v3-HS reagents as either 100 bp single-end or paired-end reads at the Australian Genome Research Facility (AGRF), Melbourne. Reads were aligned to the mouse reference genome mm10 and mapped to known genomic features at the gene level using the Rsubread package (version 1.10.5) (Liao et al. 2013). Mapped reads were then summarized into gene-level counts using FeatureCounts (Liao et al. 2014). Total RNA was extracted and purified from each cell line and their transcriptomes analyzed by RNA-Seq.
2015-06-11 | E-GEOD-65747 | biostudies-arrayexpress
Project description:Purpose: The aim of this study is to identify genes that are under the transcriptional control of the epigenetic regulator Smchd1 in neural stem cells (NSCs) derived from E14.5 mouse brain Methods: Total RNA was extracted using an AllPrep DNA/RNA Mini Kit (Qiagen) from cultured neural stem cells derived from male mouse E14.5 brains either wild-type or null for Smchd1. 1 µg total RNA was used to generate sequencing libraries for whole transcriptome analysis with Illumina’s TruSeq RNA Sample Preparation Kit v2 as per standard protocols. Libraries were sequenced on HiSeq 2000 with Illumina TruSeq SBS Kit v3-HS reagents as either 100 bp single-end or paired-end reads at the Australian Genome Research Facility (AGRF), Melbourne. Reads were aligned to the mouse reference genome mm10 and mapped to known genomic features at the gene level using the Rsubread package (version 1.10.5) (Liao et al. 2013). Mapped reads were then summarized into gene-level counts using FeatureCounts (Liao et al. 2014).
2015-06-11 | GSE65747 | GEO
Project description:Purpose: The aim of this study is to determine the absolute and relative expression levels of mRNA transcripts across multiple flow cytometrically sorted epithelial cell types including freshly isolated CD24+CD29hi mammary stem cell-enriched basal cells (MaSC/basal), CD24+CD29loCD61+ luminal progenitor-enriched (LP) and the CD24+CD29loCD61- mature luminal-enriched (ML) cell populations. Additionally, a comparison between these primary cell types and cultured MaSC/Basal-derived mammosphere cells (mammosphere) and the CommaD-βGeo (CommaDβ) cell line was performed. Methods: Total RNA was extracted and purified from sorted luminal or basal populations from the mammary glands of female virgin 8- to 10-week-old FVB/N mice (3 independent samples per population), MaSC/Basal cells cultured for 1 week under mammosphere conditions and CommaDβ cells grown under maintenance conditions (Deugnier et al. 2006). Total RNA (100 ng) was used to generate sequencing libraries for whole transcriptome analysis following Illumina’s TruSeq RNA v2 sample preparation protocol. Completed libraries were sequenced on HiSeq 2000 with TruSeq SBS Kit v3- HS reagents (Illumina) as 100 bp single-end reads at the Australian Genome Research Facility (AGRF), Melbourne. Approximately 30 million 100 bp single-end reads were obtained for each sample. Reads were aligned to the mouse reference genome mm10 and mapped to known genomic features at the gene level using the Rsubread package (version 1.14.1) (Liao et al. 2013). Single reads were then summarized into gene-level counts using FeatureCounts (Liao et al. 2014).
2015-03-15 | GSE63310 | GEO
Project description:Purpose: The aim of this study is to compare the transcriptome profiles of a limited number of lung cancer cell lines with the intention of selecting the two most similar cell lines for a mixture experiment (GSE64098). Methods - Cell Culture: Five lung adenocarcinoma cell lines (H2228, NCI-H1975, HCC827, H838 and A549) from a range of passages (2-4) were grown on 2 separate occasions in RPMI media (Gibco) supplemented with Glutamax and 10\% fetal calf serum to a 70\% confluence. To replicate common experimental conditions cell lines were treated with 0.01\% Dimethyl sulfoxide (Sigma), which is commonly used as a vehicle in drug treatment experiments. After 6 hours of treatment, cells were collected, snap-frozen on dry ice and stored at -80 degree C until required. Methods - RNA preparation: Total RNA was extracted from between half a million and million cells using Total RNA Purification Kit (Norgen Biotek) according to the kit instructions. RNA quality and concentration were assessed using Nanodrop and Tapestation RNA ScreenTape (Agilent) respectively. Methods - RNA-seq: 1 ug of total RNA from each sample were used for RNA-seq library preparation using TruSeq Total Stranded RNA with Ribozero (Illumina) according to manufacturer's instructions. Completed libraries were sequenced on HiSeq 2000 with TruSeq SBS Kit v3- HS reagents (Illumina) as 100 bp single end reads at the Australian Genome Research Facility (AGRF), Melbourne. We obtained on average 28 million for each sample (range from 25 to 29 million). Reads were aligned to the human reference genome hg19 using the Rsubread package (version 1.16.1) (Liao et al. 2013). Single reads were then summarized into gene-level counts using FeatureCounts in the reverse-stranded mode (Liao et al. 2014).
2016-09-02 | GSE86337 | GEO
Project description:Purpose: The aim of this study is to compare different RNA extraction methods using a mixture design that allows the relative changes of the majority of genes profiled to be estimated. A number of samples were degraded to allow us to compare methods for dealing with more variable samples. Methods - Cell Culture: Lung adenocarcinoma cell lines NCI-H1975 and HCC827 from a range of passages (2-4) were grown on 3 separate occasions in RPMI media (Gibco) supplemented with Glutamax and 10% fetal calf serum to a 70% confluence. To replicate common experimental conditions cell lines were treated with 0.01% Dimethyl sulfoxide (Sigma), which is commonly used as a vehicle in drug treatment experiments. After 6 hours of treatment, cells were collected, snap-frozen on dry ice and stored at -80 degrees C until required. Methods - RNA preparation: Total RNA was extracted from between half a million and million cells using Total RNA Purification Kit (Norgen Biotek) with on-column DNAse treatment accorting to the kit instructions. RNA concentration for each pair of samples to be mixed was equalised to ~100 ng/μl using Qubit RNA BR Assay Kit (Life Technologies). Replicates were pooled in known proportions to obtain mixtures ranging from pure NCI-H1975 (100:0) to pure HCC827 (0:100) and intermediate mixtures ranging from 75:25 to 50:50 to 25:75 NCI-H1975:HCC827. All mixtures corresponding to the second replicate were split into two equal aliquots. One aliquot was left intact (we refer to this as the 'good' replicate), while the second aliquot was degraded to produce known outlier samples by incubation at 37 degrees C for 7 days in a thermal cycler with a heated lid. 10 μl from each replicated mixture (both good and degraded) were used for Next Generation Sequencing library preparation using two kits: Illumina TruSeq Total Stranded RNA with Ribozero (TotalRNA) and Illumina TruSeq RNA v2 (mRNA) according to the manufacturer's instructions. Completed libraries were sequenced on HiSeq 2500 with TruSeq SBS Kit v4- HS reagents (Illumina) as 100 bp single-end reads at the Australian Genome Research Facility (AGRF), Melbourne. Approximately 30 million 100 bp single-end reads were obtained for each sample. Reads were aligned to the human reference genome hg19 and mapped to known genomic features at the gene level using the Rsubread package (version 1.16.1) (Liao et al. 2013). Single reads were then summarized into gene-level counts using FeatureCounts (Liao et al. 2014).
2015-03-13 | GSE64098 | GEO
Project description:We used our newly ultra deep sequence data and bioinformatics to re-annotate P. xylostella genome for high confidence miRNAs with the correct 5p and 3p arm features. Furthermore, the whole genome was screened to identify potential miRNA binding sites using three target-predicting algorithms. Totally, 203 mature miRNAs were annotated, including 33 novel miRNAs. Two geographical populations of Diamondback moth larvae from Queensland (Gatton) and South Australia (Waite) were collected and reared on the cabbage plant at the University of Queensland in Australia. Total RNA was extracted from fifteen 3rd instar larval samples using Triazol® following the manufacturerâs protocol (Life Technologies). The small RNA libraries were generated from both populations with three biological replicates using the Illumina Truseq small RNA preparation kit at the Australian Genome Research Facility (AGRF-Melbourne, Australia). The purified cDNA libraries were sequenced on Illumina HiSeq and raw sequencing reads (50 nt) were obtained using Illuminaâs Sequencing Control Studio software.
2016-08-01 | E-GEOD-76321 | biostudies-arrayexpress
Project description:RNA-seq was performed using RNA extracted from blasted CD4+ T cells from individuals with TCF3 (haploinsufficiency [HI], null, or dominant negative [DN] mutations and healthy controls for the following study groups: healthy controls (HC, n=4) and patients with TCF3 mutations (HI=4, null=1, DN=1 ). Libraries were prepared using the AmpliSeq for Illumina Transcriptome Human Gene Expression panel. RNA-seq was performed on the Illumina HiSeq 2500 (Illumina; AmpliSeq for Illumina/HiSeq 2500). Demultiplexed reads were mapped to the hg19 genome using the splice-aware aligner Tophat (Trapnell et al., 2009). Gene-level counts data were generated using the Rsubread feature counts a read summarization program that counts mapped reads for genomic features such as genes (Liao et al., 2019). Differential expression analysis was performed using R (v.3.5.3) and DESeq2 (v.1.22.2)(Love et al., 2014).
2022-12-01 | GSE218787 | GEO
Project description:Chromatin immunoprecipitation (ChIP) experiments were conducted as previously described (Ito et al, 2013) using anti-H3K4me3 (Millipore, #07-473), anti-H3K4me1 (Abcam, #ab8895), or anti-Kdm5C (Iwase et al., 2016). Hippocampi derived from two different animals were pooled together for each sample and two independent biological replicates per condition were sequenced according to manufacturer instructions in a HiSeq2500 apparatus (Illumina, Inc). Information on library preparation method, size of the libraries, and mapping to reference genome can be found in Supplementary Material accompanying the manuscript. ChIP-seq reads were aligned to the mouse genome (Mus_musculus.GRCm.38.83) using bowtie2 (v2.2.9) (Langmead and Salzberg, 2012) and further processed using samtools (v1.3.1) (Li et al., 2009). Peak calling was performed using MACS2 (v2.1.0) (Zhang et al., 2008) with default parameters except for Kdm5c that were as follows: -q 0.01 --nomodel --extsize 131 --broad --broad-cutoff 0.1. Read counts on aligned bam files were performed using Rsubread (v1.22.3) (Liao et al., 2014). Differential peak methylation analysis for H3K4me3 chromatin mark was performed using DESeq2 (v1.10.0) (Love et al., 2014) of the bioconductor suite (Huber et al., 2015) in the R (v3.3) statistical computing platform. For consideration of differentially methylated regions between conditions, we used adjusted p-value < 0.05 as indicated in the manuscript.
2017-08-18 | GSE85873 | GEO
Project description:RNA isolation and RNA-Seq: Wild-type Xcc or pXccBphP strains were cultured in far-red light or dark conditions up to logarithmic phase (0.7 to 0.8 OD600) at 28C in PYM broth. Total bacterial RNA was isolated using the MasterPureTM RNA Purification Kit (Epicentre, Illumina). Samples corresponding to two biological replicates of each condition were submitted to Genome Qubec for rRNA removal with Ribo-Zero (Illumina) and TruSeq RNA-seq library preparation. 50 bp single-end sequencing of the libraries was performed using an Illumina HiSeq 2000 platform (Genome Qubec). Removal of low-quality reads and Illumina adapters, and assessment of the quality of the reads was performed using Trimmomatic (Bolger et al, 2014) and FastQC (www.bioinformatics.babraham.ac.uk/ projects/fastqc/), respectively. Rads were aligned to the Xcc genome obtained from GenBank (accession number: NC_007086.1) using SAMtools and the BurrowsWheeler Alignment software (BWA) (Li et al, 2009). Alignments were visualized using the software Integrated Genome Viewer (IGV) (http://broadinstitute.org/igv). RNA-Seq differential expression analysis: Read counts corresponding to annotated ORFs were quantified with the software FeatureCounts (Liao et al, 2014) using the strand specific mode. Differential expression analysis was performed using the software DESeq (Anders & Huber, 2010). Genes displaying adjusted p-value < 0.05.
2016-12-03 | E-MTAB-4958 | biostudies-arrayexpress