Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

RNA-Sequencing analysis of reproduction/meiosis in Selaginella moellendorffii

ABSTRACT: To investigate global gene expression during meiosis in S. moellendorfii, digital gene-expression profiling of a series of sporangia at different developmental stages was performed by Illumina HiSeq™ 2000 sequencing platforms, with young leaves being used as a control. The samples were collected from South Mountain, Chongqing (29°33'44.18"N; 106°37'35.62"E) and stored in RNAlater solution. Total RNAs were extracted using the TRIzol solution. The clean reads were aligned to the genome sequence of S. moellendorfii at JGI database by SOAP2. Gene expression levels were calculated from the number of uniquely aligned clean reads and then normalized into units of Reads Per Kilobase per Million reads mapped (RPKM). Genes were considered to be differentially expressed if they had an FDR < 0.05, P-value < 0.05, and the absolute value of log2Ratio ≥ 1 between reproductive and vegetative samples. As a result, 5416 genes were found to be up-regulated in reproductive/meiotic samples.

ORGANISM(S): Selaginella moellendorffii

PROVIDER: GSE83783 | GEO | 2019/06/27

REPOSITORIES: GEO

ACCESS DATA

Json Xml

Dataset's files

Source:

			Action	DRS
		Other

Items per page:

1 - 1 of 1

Similar Datasets

RNA-seq transcriptome profiling of young gametophytes and capsules at different developmental stages of Pogonatum aloides

Project description:To investigate global gene expression during development in Pogonatum aloides, digital gene-expression profiling of capsules at different developmental stages was performed by Illumina HiSeq™ 2000 sequencing platforms, with the young gametophyte being used as a control. The samples of P. aloides were collected from Jiming Mountain, Ningde (26°56'39.34"N; 118°57'21.45"E, and stored in RNAlater solution. Total RNAs were extracted using the TRIzol reagent. The RNA-Seq reads were assembled into transcripts using SOAPdenovo v1.04. Gene expression levels were calculated from the number of uniquely aligned clean reads and then normalized into units of Reads Per Kilobase per Million reads mapped (RPKM). Genes were considered to be differentially expressed if they had an FDR < 0.05, P-value < 0.05, and the absolute value of log2Ratio ≥ 1 between reproductive and vegetative samples. As a result, 4007 genes were found to be up-regulated in reproductive/meiotic samples.

2019-06-27 | GSE83779 | GEO

RNA-seq data of the Amphotericin (AmB)-resistant Aspergillus strain 211 and its AmB-susceptible sectorized derivative with and without AmB treatment

Project description:Summary taken from our paper “Aspergillus terreus Sectorization: A Morphological Phenomenon Shedding Light on Amphotericin B Resistance Mechanism”: WT and ATSec strains were grown in AMM broth for 30 h at 30 °C. Afterwards, the cultures were subjected to either DMSO (control) or 1 µg/ml AmB treatment for 1 h/4 h. Triplicates of each combination of these factors were made, resulting in a total of 24 samples. RNA was extracted with a Promega GmbH kit (Madison, Wisconsin, USA) following the manufacturer’s instructions. The RNA-seq experiment was conducted by BGI, generating a total of around 20 million 100bp paired-end reads with the DNBSEQ platform. BGI employed SOAPnuke (51) to remove rRNA, adaptor-containing sequences, low quality reads, and reads with high unknown nucleotide content, producing "clean reads" datasets that were used in the analysis. On average, clean read datasets contain 45.1 Mb of reads, while the raw read datasets contain 48.7 Mb. For clean reads, the mean Q20 value is 98.3%, and the mean Q30 value is 92.5%.

2024-09-25 | GSE277670 | GEO

Next-generation sequencing analyses of the differently expressed genes of wild type and atcep1 mutant Arabidopsis thaliana

Project description:Purpose: The goal of this study is to compare the differently expressed genes in the wild type and the KDEL-tailed cysteine protease AtCEP1 knockout (atcep1) Arabidopsis using RNA-sequencing (RNA-seq). Methods: Arabidopsis buds mRNA profiles of anther development stages 5-6, 7-9, and 10-11 of the wild type (WT) and atcep1 mutant were generated by deep sequencing via Illumina HiSeqTM 2000. The sequence reads that passed quality filters were analyzed at the transcript isoform level with the following steps: Remove reads with adaptor sequences; Remove reads in which the percentage of unknown bases (N) is greater than 10%; Remove low quality reads, in which the percentage of the low quality base (base with quality value â¤ 5) is greater than 50%. The clean reads were mapped to the Arabidopsis reference genome and reference genes using SOAP aligner/SOAP2. No more than 2 mismatches were allowed in the alignment. The gene expression level was calculated using RPKM (Reads Per Kb per Million reads). Differential expression analysis between the wild type and the atcep1 mutant was performed using the DEGseq R package (1.12.0) based on normalized read counts. A corrected P value of < 0.005 and |log2Ratio| > 1 were set as the threshold for significantly differential expression. Results: We identified 872 genes showing significant differential expression, and in the atcep1 mutant, the upregulated genes significantly outnumbered the downregulated genes at the three time points. The GO analysis of the differently expressed genes showed that the expression of genes participating in anther tapetal secretory structure formation, pollen wall development, and tapetal cell wall generation, clearly changed. Arabidopsis buds mRNA profiles of development stages 5-6, 7-9, and 10-11 of the wild type (WT) and atcep1 muant were generated by deep sequencing via Illumina HiSeqTM 2000.

2016-03-25 | E-GEOD-50956 | biostudies-arrayexpress

Next Generation Sequencing Facilitates Quantitative Analysis of E.coli DH5a Transcriptomes under triclosan exposure

Project description:The goals of this study are to use Next-generation sequencing (NGS)to detect bacterial mRNA profiles of E.coli DH5a in response to 0, 20ug/L and 2 mg/L triclosan for 2 h, in triplicate, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2021-01-12 | GSE143554 | GEO

Next Generation Sequencing Facilitates Quantitative Analysis of E. coli K-12 LE392, P. putida KT2440, and RP4 plasmid Transcriptomes under AgNP and silver ion exposure

Project description:The goals of this study are to use Next-generation sequencing (NGS)to detect bacterial mRNA profiles of E. coli K-12 LE392, P. putida KT2440 and IncPα RP4 plasmid in response to 0 and 1 μg/L AgNPs or silver ion for 2 h, in duplicate, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2020-02-01 | GSE128246 | GEO

Next Generation Sequencing Facilitates Quantitative Analysis of Pseudomonas aeruginosa PAO1 Transcriptomes under AgNP and AgNR exposure

Project description:The goals of this study are to use Next-generation sequencing (NGS)to detect bacterial mRNA profiles of Pseudomonas aeruginosa PAO1 in response to 0, 1, 20 and 25 mg/L AgNPs or 0, 1,30 and 300 mg/L AgNRs for 2 h, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2020-10-18 | GSE139104 | GEO

Next Generation Sequencing Facilitates Quantitative Analysis of E. coli K-12 LE392, P. putida KT2440, and RP4 plasmid Transcriptomes under triclosan exposure

Project description:The goals of this study are to use Next-generation sequencing (NGS)to detect bacterial mRNA profiles of E. coli K-12 LE392, P. putida KT2440 and IncPα RP4 plasmid in response to 0, 0.02, 20 and 2000 μg/L triclosan for 2 h, in duplicate, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2019-04-01 | GSE112451 | GEO

Next Generation Sequencing Facilitates Quantitative Analysis of original and mutant E. coli K-12 MG1655 Transcriptomes

Project description:The goals of this study are to use Next-generation sequencing (NGS)to detect bacterial mRNA profiles of original E. coli K-12 MG1655 and fluoxetine induced E. coli mutants in response to 100 mg/L fluoxetine for 8 h, in triplicate, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2020-12-18 | GSE108190 | GEO

Next Generation Sequencing Facilitates Quantitative Analysis of Wild Type and mutant E. coli K-12 MG1655 Transcriptomes

Project description:The goals of this study are to use Next-generation sequencing (NGS) to detect bacterial mRNA profiles of wild-type E. coli K-12 MG1655 and triclosan induced E. coli mutants in response to 0.2 mg/L triclosan for 8 h, in triplicate, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2018-12-01 | GSE107048 | GEO

Next Generation Sequencing Facilitates Quantitative Analysis of Acinetobacter baylyi ADP1 Transcriptomes under heavy metal-based NPs and ions exposure

Project description:The goals of this study are to use Next-generation sequencing (NGS)to detect bacterial mRNA profiles of Acinetobacter baylyi ADP1 in response to 0, 1 mg/L AgNPs or Ag ions, 1 mg/L CuO NPs or Cu ions, 10 mg/L ZnO NPs or Zn ions for 2 h, in triplicate, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2020-10-23 | GSE139295 | GEO

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data