Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

RNAseq of normal associate fibroblasts after treatment with large oncosomes from prostate cancer cells

ABSTRACT: In order to detect the alteration in the transcriptomic profile of fibroblasts exposed to the large oncosomes and detemine the transcription factor responsible for those alteration we performed whole RNA sequncing with and without treatment with large oncosomes. Deep sequencing data were generated in duplicate using a NextSeq 500 platform (Illumina) using 75 single-end sequencing obtaining about 20 million reads per sample. Raw reads obtained from RNA-Seq were aligned to the custom human GRCh38 transcriptome reference (http://www.gencodegenes.org) using Bowtie (version 1.1.1) and RSEM (version 1.2.20) with default parameters. of 207 differentially expressed genes were identified between control and large oncosomes treated fibroblasts and master regulator analysis performed using TF-target interaction information collected from public databases revealed MYC and SPI1 as main transcription factors responsible for these alterations.

ORGANISM(S): Homo sapiens

PROVIDER: GSE87563 | GEO | 2017/11/02

SECONDARY ACCESSION(S): PRJNA345199

REPOSITORIES: GEO

ACCESS DATA

Json Xml

Dataset's files

Source:

			Action	DRS
		Other

Items per page:

1 - 1 of 1

Similar Datasets

Pod development transcriptomes of four Phaseolus vulgaris accesions

Project description:The goal of this study was to detemine the genes responsible of the pod indehiscence in Phaseolus vulgaris by comparing 4 accesions with total, middle and null dehiscence transcriptomes of three stages of pod develoment of Phaseolus vulgaris

2022-04-16 | GSE179985 | GEO

Next Generation Sequencing to understand the pathogenic role of synovial fibroblasts in experimental models of arthritis

Project description:The goal of this study is to define the pathophysiology of synovial fibroblasts in chroninc joint inflammation using NGS-derived synovial transcriptome profiling (RNA-seq) Methods: Synovial fibroblasts were isolated by FACs sorting [CD45-CD31-Popdoplanin+] from the synovium of healthy mice and mice undergoing experimental Collagen-Induced Arthritis (12 weeks old)(CIA). Methods: Whole Transcriptome Profiling of healthy and CIA synovial fibroblasts were generated by deep sequencing, in triplicate, using Illumina NextSeq™ 500 platform. Libraries were prepared using polyA selection (TruSeq stranded mRNA kit). Methods: The sequence reads that passed quality filters were aligned to mouse reference genome (GRCM38) using Hisat2 version 2.1.0. we mapped about 30 million sequence reads per sample (75 bp, paired-end) Methods: Featurecounts version 1.4.6 was used to quantify reads counts. Data quality control, non-expressed gene filtering, median ratio normalization (MRN) implemented in DESeq2 package and identification of differentially expressed (DE) genes were done using the R bioconductor project DEbrowser. Results: Results: We detected several differentially expressed (DE) genes in CIA synovial fibroblasts compared to naïve cells. These included 298 up-regulated genes and 88 down-regulated (>2 fold, adjp <0.05). DE genes reflected the reflecting the hyperplasia and activation observed during chronic joint disease. Pathways associated to DE genes were cell cycle and cell division and inflammatory response. Conclusions: our study shows pathophysiological changes associated to inflammatory synovial fibroblasts in a model of rheumatoid arthritis. Cells were directly isolated from fresh tissue, providing a valuable tool to study stromal inflammation.

2020-11-30 | GSE162306 | GEO

RNA-seq approaches to understand the biological effects of sialic acid on murine synovial fibroblasts

Project description:The aim of this study was to explore the role sialic acid in synovial fibroblasts using NGS-derived transcriptome analysis (RNA-seq). Methods: Synovial fibroblasts were extracted from the synovium of healthy mice and expanded ex vivo. RNA was extracted from sialidase buffer (NT) and Clostridium perfringens Neuraminidase (CP) treated synovial fibroblast. Methods: Whole Transcriptome Profiling was generated by deep sequencing, in triplicate, using Illumina NextSeq™ 500 platform. Libraries were prepared using polyA selection (TruSeq stranded mRNA kit). Methods: The sequence reads that passed quality filters were aligned to mouse reference genome (GRCM38) using Hisat2 version 2.1.0. we mapped about 30 million sequence reads per sample (75 bp, paired-end) Methods: Featurecounts version 1.4.6 was used to quantify reads counts. Data quality control, non-expressed gene filtering, median ratio normalization (MRN) implemented in DESeq2 package and identification of differentially expressed (DE) genes were done using the R bioconductor project DEbrowser. Results: we detected differentially expressed genes in CP treated synovial fibroblast compared to NT synovial fibroblast, which pass the threshold of >2 fold, adjp <0.01. DE genes reflect increased cellular inflammatory response after CP treatment Conclusions: These findings underline the ability of sialic acid to modulate homeostatic and inflammatory responses in non-immune synovial fibroblasts, suggesting that sialylation plays a key role in perpetuating local inflammation in the arthritic joint.

2022-02-19 | GSE196898 | GEO

RNA-Seq approaches to understand the role of ARNO/Cyth2 on IL-1beta-stimulated synovial fibroblasts.

Project description:The aim of this study was to explore the role of ARNO, also known as Cyth2, in synovial fibroblasts using NGS-derived transcriptome analysis (RNA-seq). Synovial fibroblasts were isolated from mouse synovium, and stimulated with IL-1beta for 12 hours in healthy cells and cells where Cyth2 expression was knocked-down by silencing RNA. Methods: Synovial fibroblasts were extracted from the synovium of healthy mice and expanded in vitro, RNA was extracted from naïve, IL-1β stimulated and IL-1β stimulated ARNO knock-down synovial fibroblast. Methods: Whole Transcriptome Profiling of synovial fibroblasts were generated by deep sequencing, in triplicate, using Illumina NextSeq™ 500 platform. Libraries were prepared using polyA selection (TruSeq stranded mRNA kit). Methods: The sequence reads that passed quality filters were aligned to mouse reference genome (GRCM38) using Hisat2 version 2.1.0. we mapped about 30 million sequence reads per sample (75 bp, paired-end) Methods: Featurecounts version 1.4.6 was used to quantify reads counts. Data quality control, non-expressed gene filtering, median ratio normalization (MRN) implemented in DESeq2 package and identification of differentially expressed (DE) genes were done using the R bioconductor project DEbrowser. Results: Firstly, We detected differentially expressed (DE) genes among three conditions, which pass the threshold of >4 fold, adjp <0.01. Then, we detected DE genes in IL-1β stimulated ARNO knock-down synovial fibroblast compared to IL-1β stimulated synovial fibroblast, which pass the threshold of >2 fold, adjp <0.01. DE genes reflect decreased cellular inflammatory response after ARNO knockdown Conclusions: Our results reflect an ARNO-mediated inflammatory response in synovial fibroblast, provides new opportunitties for targeting fibroblast in chronic arthritis and joint disease.

2021-12-25 | GSE192488 | GEO

Von Hippel-Lindau Acts as a Metabolic Switch Controlling Nephron Progenitor Differentiation

Project description:RNA sequencing was performed on VHLNP+/- and VHLNP-/- E17.5 isolated nephron progenitors. E17.5 kidneys were dissected and screened using the GFP expression. Dissected kidneys that expressed GFP were dissociated into single cell suspensions and FACS sorted; each sample consisted of approximately 150,000 pooled nephron progenitor cells. RNA was extracted using the RNeasy Micro Kit (Qiagen). The Health Sciences Sequencing Core at Children’s Hospital of Pittsburgh performed library construction and RNA sequencing (single-end reads, 75bp). Bioinformatics quality control was performed using FastQC (version 0.11.5), and adapters were trimmed using BBDuk from the BBMap software package (version 37.41). Reads were aligned to transcripts assembled from the mm10 genome (GRCm38, GENCODE M17 ) using the Spliced Transcripts Alignments to a Reference software package (STAR, version 2.5.3a). Reads aligned to known transcripts were counted using the Bioconductor GenomicAlignments R package (version 1.10.1), and differential expression between VHLNP+/- and VHLNP-/- kidney samples was calculated using DESeq2 (version 1.18.1). Expression levels of 245 genes were identified as significantly altered between VHLNP+/- and VHLNP-/- samples (padj <= 0.05, fc > 2).

2019-05-31 | GSE122900 | GEO

ChIRP-seq of lincDUSP in colon cancer cells

Project description:The genome-wide occupancy of lincDUSP was determined by using chromatin isolation after RNA purification to detemine the genomic sites where lincDUSP directly interacts with chromatin.

2018-05-17 | GSE112602 | GEO

Next Generation Sequencing Facilitates Quantitative Analysis of E. coli K-12 LE392, P. putida KT2440, and RP4 plasmid Transcriptomes under triclosan exposure

Project description:The goals of this study are to use Next-generation sequencing (NGS)to detect bacterial mRNA profiles of E. coli K-12 LE392, P. putida KT2440 and IncPα RP4 plasmid in response to 0, 0.02, 20 and 2000 μg/L triclosan for 2 h, in duplicate, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2019-04-01 | GSE112451 | GEO

Next Generation Sequencing Facilitates Quantitative Analysis of E.coli DH5a Transcriptomes under triclosan exposure

Project description:The goals of this study are to use Next-generation sequencing (NGS)to detect bacterial mRNA profiles of E.coli DH5a in response to 0, 20ug/L and 2 mg/L triclosan for 2 h, in triplicate, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2021-01-12 | GSE143554 | GEO

Next Generation Sequencing Facilitates Quantitative Analysis of Wild Type and mutant E. coli K-12 MG1655 Transcriptomes

Project description:The goals of this study are to use Next-generation sequencing (NGS) to detect bacterial mRNA profiles of wild-type E. coli K-12 MG1655 and triclosan induced E. coli mutants in response to 0.2 mg/L triclosan for 8 h, in triplicate, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2018-12-01 | GSE107048 | GEO

Next Generation Sequencing Facilitates Quantitative Analysis of E. coli K-12 LE392, P. putida KT2440, and RP4 plasmid Transcriptomes under AgNP and silver ion exposure

Project description:The goals of this study are to use Next-generation sequencing (NGS)to detect bacterial mRNA profiles of E. coli K-12 LE392, P. putida KT2440 and IncPα RP4 plasmid in response to 0 and 1 μg/L AgNPs or silver ion for 2 h, in duplicate, using Illumina HiSeq 2500.The NGS QC toolkit (version 2.3.3) was used to treat the raw sequence reads to trim the 3’-end residual adaptors and primers, and the ambiguous characters in the reads were removed. Then, the sequence reads consisting of at least 85% bases were progressively trimmed at the 3’-ends until a quality value ≥ 20 were kept. Downstream analyses were performed using the generated clean reads of no shorter than 75 bp. The clean reads of each sample were aligned to the E. coli reference genome (NC_000913) using SeqAlto (version 0.5). Cufflinks (version 2.2.1) was used to calculate the strand-specific coverage for each gene, and to analyze the differential expression in triplicate bacterial cell cultures. The statistical analyses and visualization were conducted using CummeRbund package in R (http://compbio.mit.edu/cummeRbund/). Gene expression was calculated as fragments per kilobase of a gene per million mapped reads (FPKM, a normalized value generated from the frequency of detection and the length of a given gene.

2020-02-01 | GSE128246 | GEO

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data