Proteomic analysis in Eucalyptus urophylla × Eucalyptus grandis
Ontology highlight
ABSTRACT:
ORGANISM(S): Eucalyptus Urophylla X Eucalyptus Grandis
SUBMITTER: 
Jianzhong Luo
PROVIDER: PXD051510 | iProX | Wed Apr 17 00:00:00 BST 2024
REPOSITORIES: iProX
Similar Datasets
Project description:Wood stiffness is the most important wood quality trait of forest trees for structural timber production. We investigated genes differentially transcribed in radiate pine trees with distinct wood stiffness using bulked segregant analysis (BSA) and cDNA microarrays. Transcript accumulation in earlywood (EW) and latewood (LW) of high (HS) and low stiffness (LS) trees in two progeny trials was compared. Radiata pine trees used for microarray experiment were selected from two progeny trials planted at Flynn and Kromelite, Australia. Based on the IML-based MOE measurement, five families with highest and lowest MOE each were selected from each trial, which represented two segregant populations with contrasting wood stiffness. Two individuals from each selected family were further sampled. Developing xylem tissues of selected trees in Flynn trial were sampled in spring (October) and autumn (April), representing earlywood (EW) and latewood (LW) of juvenile aged trees, respectively. Collection of xylem tissues from Kromelite trial was arranged in summer (late November) when latewood (LW) was formed. The xylem tissues were scraped at breast height with a sharp chisel after the bark was removed. In Flynn trial EW and LW tissues were collected from the same sampled trees on opposite sides of the trunk. Transcript accumulation was compared in trees with highest (HS) and lowest stiffness (LS) using xylem samples from Flynn collected in spring (EW) and autumn (LW), as well as Kromelite in summer (LW), respectively. Bulked segregant analysis (BSA) was used for the experiment design. Total RNA samples extracted from the five trees with HS were pooled at equal amount, and compared to the bulked five individuals with LS. This pooling strategy can partly minimize the genetic variation among different genotypes. Dye swaps were applied in each biological replicate.
2011-06-01 | E-GEOD-23020 | biostudies-arrayexpress
Project description:Seasonal wood development results in two distinct wood types: earlywood (EW) and latewood (LW), which is the major cause of wood qaulity variation. We investigate transcriptome reorganization during seasonal wood development in radiata pine using a newly developed 18k cDNA microarrays. Three sampling trees each at juvenile (5 yrs), transition (9 yrs) and mature (14 yrs) ages (based on the wood rings at breast height) were selected from a plantation forest of radiata pine at Bondo, NSW , Australia (35º 16' 44.04 S, 148º 26' 54.66 E). The sampling trees at juvenile and mature ages were grown within 50 m distance and under similar environment. Two sampling trees at rotation age (30 yrs) were chosen at Yarralumla, ACT, Australia (35° 18' 27'' S, 149° 7' 27.9'' E).
2010-10-08 | E-GEOD-15230 | biostudies-arrayexpress
Project description:Arabidopsis, when grown under short day conditions (16 hours dark, 8 hours light, 22oC) develop extensive secondary thickened hypocotyls with both a vascular and cork cambium (Chaffey et al, 2002, Phys. Plant., 114:594-600). It has been found that once secondary xylem development is completed within the Arabidopsis hypocotyls, it closely resembles the structure of the wood of angiosperm trees (Chaffey et al, 2002, Phys. Plant., 114:594-600). We can utilise this model Arabidopsis tree to identify genes that are important for secondary cell wall formation in xylem cells and therefore important for wood development. Columbia plants were grown for 3 months under short day conditions and secondary thickened hypocotyls were snap-frozen in liquid nitrogen. RNA was isolated from these hypocotyls and submitted to NASC for probing against the ATH1-121501 full GeneChip.
2022-11-21 | E-NASC-58 | biostudies-arrayexpress
Project description:Arabidopsis, when grown under short day conditions (16 hours dark, 8 hours light, 22oC) develop extensive secondary thickened hypocotyls with both a vascular and cork cambium (Chaffey et al, 2002, Phys. Plant., 114:594-600). It has been found that once secondary xylem development is completed within the Arabidopsis hypocotyls, it closely resembles the structure of the wood of angiosperm trees (Chaffey et al, 2002, Phys. Plant., 114:594-600). We can utilise this model Arabidopsis tree to identify genes that are important for secondary cell wall formation in xylem cells and therefore important for wood development. Columbia plants were grown for 3 months under short day conditions and secondary thickened hypocotyls were snap-frozen in liquid nitrogen. RNA was isolated from these hypocotyls and submitted to NASC for probing against the ATH1-121501 full GeneChip. Experiment Overall Design: 2 samples
2008-06-14 | E-GEOD-6153 | biostudies-arrayexpress
Project description:Arabidopsis, when grown under short day conditions (16 hours dark, 8 hours light, 22oC) develop extensive secondary thickened hypocotyls with both a vascular and cork cambium (Chaffey et al, 2002, Phys. Plant., 114:594-600). It has been found that once secondary xylem development is completed within the Arabidopsis hypocotyls, it closely resembles the structure of the wood of angiosperm trees (Chaffey et al, 2002, Phys. Plant., 114:594-600). We can utilise this model Arabidopsis tree to identify genes that are important for secondary cell wall formation in xylem cells and therefore important for wood development. Columbia plants were grown for 3 months under short day conditions and secondary thickened hypocotyls were snap-frozen in liquid nitrogen. RNA was isolated from these hypocotyls and submitted to NASC for probing against the ATH1-121501 full GeneChip. Keywords: growth_condition_design
2007-01-22 | GSE6153 | GEO
Project description:Regeneration is a common strategy for plants to repair their damaged body plans after attack from other organisms or physical assaults. Trees with bark girdling on a large scale will grow new bark within one month and this bark regeneration after girdling system has been proven to be an efficient method to study secondary vascular development as well as plant tissue regeneration in vivo. We herein show the molecular features of differentiating xylem cell fate switch process during secondary vascular tissue (SVT) regeneration in Populus. Based on our data, we propose a working model to illustrate the molecular dynamics underlying xylem cell fate switch process during SVT regeneration, which is significant to understand the pattern formation during the SVTs regeneration and also would shed light on the mechanisms of tissue regeneration in plants. Specific regenerated tissues of Populus at different stages were isolated by tangential cryo-sectioning. Total RNA from cryo-sections representing different regenerating tissues was extracted for Affymetrix Poplar Whole Genome Array hybridization. Five samples (two replicates for each sample) were used for gene expression analysis: differentiating xylem (diX, Stage 0), dedifferentiating xylem cells (deX, Stage I), regenerated phloem (rPh, Stage II), differentiating regenerated cambium (diC, Stage II) and regenerated cambium (rC, Stage III). In addition, one pooled genomic DNA sample from cryo-sections of differentiating xylem from two trees was isolated for DNA hybridization to produce a new CDF file that was used to mask out some potentially cross-hybridizing probesets from the standard Affymetrix Poplar Genome Array. Supplementary file: poplar.cdf
2012-07-25 | E-GEOD-25309 | biostudies-arrayexpress
Project description:* In response to gravitational stresses, angiosperm trees form tension wood in the upper sides of branches and leaning stems in which cellulose content is higher, microfibrils are typically aligned closely with the fibre axis and the fibres often have a thick inner gelatinous cell wall layer (G-layer). * Gene expression was studied in Eucalyptus nitens branches oriented at 45° using microarrays containing 4 900 xylem cDNAs, and wood fibre characteristics revealed by X-ray diffraction, chemical and histochemical methods. * Xylem fibres in tension wood (upper branch) had a low microfibril angle, contained few fibres with G-layers and had higher cellulose and decreased Klason lignin compared to lower branch wood. Expression of two closely related fasciclin-like arabinogalactan proteins and a B-tubulin was inversely correlated with microfibril angle in upper and lower xylem from branches. * Structural and chemical modifications throughout the secondary cell walls of fibres sufficient to resist tension forces in branches can occur in the absence of G-layer enriched fibres and some important genes involved in responses to gravitational stress in eucalypt xylem are identified. Keywords: tissue comparison Two nine-year-old Eucalyptus nitens trees were used as a source of biological material. RNA was isolated from xylem from the vertical main stem and from the upper and lower quarter of branches oriented at approximately 45° from vertical. For each tree, slides were hybridized with probes synthesized from vertical xylem and one or other of upper or lower branch xylem.
2011-05-19 | E-GEOD-8816 | biostudies-arrayexpress
Project description:In order to pinpoint the most differentially expressed genes between Eucalyptus grandis leaf blades and vascular (xylem) tissues as well as between E. grandis and Eucalyptus globulus xylem tissues, a total number of nine 50mer-oligoprobes covering the length of each one of 21,432 unique sequences derived from the Genolyptus EST dataset were synthesized “on-chip” in duplicate, randomly distributed in two blocks of each slide. Probes were also synthesized from ten cDNA sequences encoding known human proteins as negative controls, totaling 21,442 sequences. Leaves and xylem samples were taken from two E. grandis clonal trees, i.e., both derived from the same matrix tree and harboring the same genotype. Two additional xylem samples were collected from two other E. grandis clonal trees of a different genotype, as well as from two E. globulus clonal trees. Therefore, ten cDNA samples and ten identical chips were produced at Roche NimbleGen for the microarray assays, with a total number of 385,956 features per slide. Besides the discovery of differentially expressed genes between leaf and xylem, we wanted to test the validity of the assumed “technical” and “biological duplicates” since all trees were field-grown and four years-old in age.
2011-12-31 | GSE31696 | GEO
Project description:In order to pinpoint the most differentially expressed genes between Eucalyptus grandis leaf blades and vascular (xylem) tissues as well as between E. grandis and Eucalyptus globulus xylem tissues, a total number of nine 50mer-oligoprobes covering the length of each one of 21,432 unique sequences derived from the Genolyptus EST dataset were synthesized “on-chip” in duplicate, randomly distributed in two blocks of each slide. Probes were also synthesized from ten cDNA sequences encoding known human proteins as negative controls, totaling 21,442 sequences. Leaves and xylem samples were taken from two E. grandis clonal trees, i.e., both derived from the same matrix tree and harboring the same genotype. Two additional xylem samples were collected from two other E. grandis clonal trees of a different genotype, as well as from two E. globulus clonal trees. Therefore, ten cDNA samples and ten identical chips were produced at Roche NimbleGen for the microarray assays, with a total number of 385,956 features per slide. Besides the discovery of differentially expressed genes between leaf and xylem, we wanted to test the validity of the assumed “technical” and “biological duplicates” since all trees were field-grown and four years-old in age. A ten chip study using total RNA recovered from mature leaf and vascular (xylem) tissues of Eucalyptus grandis and xylem from Eucalyptus globulus trees. Two clonal trees of E. grandis (E.grandis_Clone A_Ramet 1 and E.grandis_Clone A_Ramet 2), derived from a single matrix tree and therefore genomically identical, were the source of two samples of leaf RNA and two samples of xylem RNA, individually hybridized to four chips after cDNA synthesis/Cy3 labeling. Two other clonal trees of E. grandis (E.grandis_Clone B_Ramet 1 and E.grandis_Clone B_Ramet 2), derived from a different matrix tree, were the source of two additional samples of xylem RNA individually hybridized to four chips after cDNA synthesis/Cy3 labeling. Likewise, two pairs of clonal trees of E. globulus (E.globulus_Clone A_Ramet 1 and E.globulus_Clone A_Ramet 2/ E.globulus_Clone B_Ramet 1 and E.globulus_Clone B_Ramet 2), derived from two distinct matrix trees, were the source of four additional samples of xylem RNA, individually hybridized to four chips after cDNA synthesis/Cy3 labeling. Each chip measures the expression level of 21,432 genes from Eucalyptus sp. and ten human genes (negative controls) with nine 50-mer probe pairs (PM/MM) per gene in two separate blocks per chip (technical duplicate), totalizing 18 hybridization signal values per gene per chip.
2011-12-31 | E-GEOD-31696 | biostudies-arrayexpress
Project description:Wood density is a foundamental quality trait for structural timber, bioenergy and pulp industries. We investigated genes differentially transcribed in radiate pine juvneile trees with distinct wood density using cDNA microarrays. Radiata pine trees were selected from a progeny trial planted at Flynn, Australia. Based on the gravitical measurement of wood cores, 12 families with highest and lowest density each were selected, representing two groups of trees with contrasting wood density. One individual with higher or lower density were further sampled in each selected family. Developing xylem tissues of selected trees were sampled in autumn (April) when latewood (LW) was formed. The xylem tissues were scraped at breast height with a sharp chisel after the bark was removed. Wood cores of the sampled trees were further measured using SilviScan 2. Total RNA extracted from ten developing xylem tissues with confirmed distinct density in each tree group were pooled into two bulks (five trees each), and the two bulks of HD were compared with two LD bulks in the microarray experiment (named the bulk experiment). Six developing xylem tissues with the most distinct density from each tree group were further chosen. Six xylem tissues with HD were individually compared with bulked six xylem tissues with LD in the second microarray experiment (named individual experiment). These two different pooling strategies can partly minimize the genetic variation among different genotypes. Dye swaps were applied in each biological replicate.
2012-08-02 | E-GEOD-32086 | biostudies-arrayexpress