Brittonodoxa subpinnata Insoluble extract
Ontology highlight
ABSTRACT:
INSTRUMENT(S): LC-MS low-resolution (Thermo-Fischer)
ORGANISM(S): Brittonodoxa Subpinnata
SUBMITTER: 
Wilton Ricardo Sala-Carvalho
PROVIDER: MSV000093498 | MassIVE | Sat Nov 25 15:16:00 GMT 2023
REPOSITORIES: MassIVE
Similar Datasets
Project description:The plant leaves were incubated (twice) at room temperature in NaCl solution (1M, 5 mL) for 15 min each, in methanol (5 mL), then in methanol-chloroform (1:1, 5 mL) twice for 30 min, and finally washed with methanol (5 mL). After each incubation, the supernatant was discarded.
The residue was dried in the open air and submitted to alkaline hydrolysis for 18 h at room temperature and in absence of light using NaOH (1M, 50 mL g-1). The alkaline extract was filtered and acidified with HCl until pH 3 and filtered again. The extract was submitted to the same process of cleanup with SPE described above, but the column was washed with ultrapure water and methanol 5% before elution using 10 mL of methanol.
2023-11-25 | MSV000093498 | GNPS
Project description:1x107 cells HEK293 FLP-IN T-REX cells were infected with SINVnsP3-mScarlet (bait) or SINVwt (negative control) at 1 MOI. After 18 hours, cells were scrapped and spin down at 300 g 4°C for 10 mins. After the centrifugation, supernatants were discarded and cell pellet washed once with 1X PBS, followed by another centrifugation at 300xg 4°C for 10min. After discarding the supernatant, cell pellets were lysed with 200µL ice-cold lysis buffer (10mM Tris-Cl pH 7.5, 150mM NaCl, 0.5mM EDTA, 0.5% IGEPAL, benzonase(1U/mL) and 0.1mM AEBSF serine protease inhibitor) , and incubated on ice for 30min. Then, cell lysates were cleared by centrifugation 17,000xg for 10min at 4°C. The supernatants were transferred to new tubes and diluted 1:1 with the dilution buffer (10mM Tris-Cl pH 7.5 150mM NaCl 0.5mM EDTA 0.05% IGEPAL). Next, cell lysates were incubated with 15µL of RFP-Trap® Magnetic Particles M-270 (pre-washed once with the dilution buffer) for 1 hour at 4 °C with mild rotation. After the incubation, the magnetic beads were washed five times with wash buffer1 (10mM Tris/Cl pH 7.5, 150mM NaCl, 0.5mM EDTA and 0.25% IGEPAL), followed by two washes with the dilution buffer. The proteins elution from the beads was done twice at room temperature with shaking, the first elution with 45µL 0.2M glycine pH 2 solution and the second elution with 45µL 0.2M glycine pH 2 (supplemented with 1%SDS) solution. Finally combined protein eluates were neutralized with 10µL 1M Tris-base pH 10. For proteomic analysis three biological replicates were generated.
2024-12-19 | PXD054117 | Pride
Project description:Cells were grown to saturation in YPD (YEP + 2% glucose) for 24 hours, diluted into YPA (YEP + 2% potassium acetate) at OD600= 0.3 and grown over night at 30C. Cells were washed with sterilized water the next day and re-suspended in SPII medium (0.3% potassium acetate, pH = 7.0) at OD600= 1.9 to induce sporulation. Cells were sporulated at room temperature or 30C as indicated. Sporulation medium containing benomyl was always prepared freshly on the day of the experiment following the directions in {Shonn, 2000 #90}. Briefly, DMSO (dimethyl sulfoxide, Sigma-Aldrich) or benomyl [Methyl 1-(butylcarbamoyl)-2-benzimidazolecarbamate, Sigma-Aldrich; 30 mg/ml stock in DMSO] was dissolved in near-boiling SPII medium to avoid precipitation. The medium was then allowed to slowly cool to 30C or room temperature. At the time of drug treatment, cells were filtered and immediately re-suspended in the medium containing benomyl or DMSO. Keywords = benomyl sporulation saccharomyces microtubule spindle checkpoint Keywords: ordered
2004-10-18 | GSE1693 | GEO
Project description:+Gly 20, 40, 80: Cells were grown to early log phase (OD600 ~ 0.2) at 30oC in 1 liter of minimal B medium (Cherest, H., and Surdin-Kerjan, Y. (1992) Genetics 130, 51-58) and t=0 time point samples were harvested (250 ml). The remainder of the medium was supplemented with 10 mM glycine incubated at 30oC and samples (250 ml) harvested at 20, 40 and 80 minutes. All cells were harvested by rapid centrifugation at room temperature then flash frozen in liquid nitrogen. -Gly 20, 40, 80: Cells were grown to early log phase (OD600 ~ 0.2) at 30oC in 1 liter of minimal B medium (Cherest, H., and Surdin-Kerjan, Y. (1992) Genetics 130, 51-58) supplemented with 10 mM glycine and t=0 time point samples were harvested (250 ml). The remainder of the medium was filtered and the cells were rapidly resuspended in 750 ml of pre-warmed B minimal medium, incubated at 30oC and samples (250 ml) harvested at 20, 40 and 80 minutes. All cells were harvested by rapid centrifugation at room temperature then flash frozen in liquid nitrogen. Keywords: time-course
2004-07-17 | GSE1554 | GEO
Project description:Purpose: Nxf1 is thought to be an essential nuclear exporter of messenger RNA (mRNA) in eukaryotic cells. Whether perturbations in the Nxf1 pathway affect mammalian physiology is not known. The aim of this study is to determine the impact of a Nxf1 mutation in the representation of mRNA transcripts in erythrocytes. Methods: Red blood cells were obtained from cardiac puncture, mixed with 100µl Aster Jandl citrate-based anticoagulant and subsequently diluted in 2 ml of phosphate buffer saline (PBS) with 2mM EDTA. This suspension was layered with 1.5 ml Ficoll-paque PLUS (GE Healthcare) and centrifuged at 400g for 30 minutes at room temperature with minimal acceleration and brake. The red blood cell containing pellet was washed twice with PBS 2mM EDTA and lysed for RNA extraction. The purity of each sample was checked by flow cytometry to assess the relative contamination of Ter199+ red blood cells with CD41+ platelets, CD45+ lymphocytes and DRAQ5+ (Thermo Fisher Scientific) nucleated cells. Red blood cell suspensions used for RNAseq were > 99.8% pure. RNA was extracted with Qiagen RNA extraction kit.
2020-03-04 | GSE141160 | GEO
Project description:Cells were grown to saturation in YPD (YEP + 2% glucose) for 24 hours, diluted into YPA (YEP + 2% potassium acetate) at OD600= 0.3 and grown over night at 30C. Cells were washed with sterilized water the next day and re-suspended in SPII medium (0.3% potassium acetate, pH = 7.0) at OD600= 1.9 to induce sporulation. Cells were sporulated at room temperature or 30C as indicated. Sporulation medium containing benomyl was always prepared freshly on the day of the experiment following the directions in {Shonn, 2000 #90}. Briefly, DMSO (dimethyl sulfoxide, Sigma-Aldrich) or benomyl [Methyl 1-(butylcarbamoyl)-2-benzimidazolecarbamate, Sigma-Aldrich; 30 mg/ml stock in DMSO] was dissolved in near-boiling SPII medium to avoid precipitation. The medium was then allowed to slowly cool to 30C or room temperature. At the time of drug treatment, cells were filtered and immediately re-suspended in the medium containing benomyl or DMSO.
2008-06-11 | E-GEOD-1693 | biostudies-arrayexpress
Project description:The annotation of the Affymetrix HTA 2.0 array was updated to optimise the detection of RNA in human skeletal muscle samples by removing invalid and low signal-high-variance probes Human primary skeletal muscle cells were isolated from muscle biopsies from healthy adults as previously described (Crossland et al. 2016; Crossland et al. 2017). Myogenic cell enrichment used magnetic-activated cell sorting (MACS) and anti-CD56 microbeads (130-050-401; Miltenyi Biotec). Myogenic purity was assessed through measurement of fractional desmin positivity (Crossland et al. 2016; Crossland et al. 2017). Cells were washed in PBS and fixed in ice-cold 1:1 acetone/methanol, before being blocked in 5% (v/v) goat serum for 30 min at room temperature. Cells were subsequently incubated with rabbit anti-desmin monoclonal antibody (ab32362; Abcam) for 1h at room temperature, washed, and incubated with anti-rabbit TRITC-conjugated secondary antibody as previously detailed (Crossland et al. 2016; Crossland et al. 2017). Finally, cells were washed in PBS and mounted/DAPI-stained using FluoroshieldTM mounting medium with DAPI. Myoblasts at passage 5-6 were cultured on Collagen Type I-coated 6-well dishes in Dulbecco’s Modified Eagle Medium/Nutrient Mixture F-12 (DMEM/F-12; Life Technologies) containing 20% (v/v) fetal bovine serum (FBS, Sigma-Aldrich), 1% (v/v) antibiotic-antimycotic (AbAm) solution and 4mM L-glutamine (Life Technologies). Cells were maintained at 37oC with 5% CO2. Once cells reached ~95% confluency, differentiation was induced by switching the medium to DMEM/F-12 containing 2% (v/v) horse serum (Sigma-Aldrich), 4mM L-glutamine and 1% (v/v) AbAm solution (Life Technologies). Six days following the initiation of differentiation, a media change was carried out, using differentiation media supplemented with long R3 IGF-1 (10 ng/ml; Sigma-Aldrich), with or without 100 nM rapamycin (Sigma-Aldrich). DMSO (final concentration 0.01% (v/v)) was used as a vehicle control for rapamycin. Samples were collected at 0h baseline and following 4h and 24h treatment.
2019-08-01 | GSE130789 | GEO
Project description:This project compares the outer membrane proteome to the proteome of outer membrane vesicles of the bacterium Shewanella onedensis. S. oneidensis outer membrane was purified via the sarkosyl method described in (Brown, 2010). A 50 mL overnight culture of cells were harvested by centrifugation at 10,000× g for 10 min. cell pellet suspended in 20 mL of 20 mM ice-cold sodium phosphate (pH 7.5) and passed four times through a French Press (12000 lb/in2). The lysate was centrifuged at 5,000× g for 30 min to remove unbroken cells. The remaining supernatant was centrifuged at 45,000 × g for 1 h to pellet membranes. Crude membranes were suspended in 20 mL 0.5% Sarkosyl in 20 mM sodium phosphate and shaken horizontally at 200 rpm for 30 min at room temperature. The crude membrane sample was centrifuged at 45,000 × g for 1 h to pellet the OM. The pellet of OM was washed in ice-cold sodium phosphate and recentrifuged. The cells were pelleted by centrifugation at 5000 x g for 20 min at 4°C, and the supernatant was filtered through 0.45 μm pore size filters to remove remaining bacterial cells. Vesicles were obtained by centrifugation at 38,400 x g for 1 h at 4°C in an Avanti J-20XP centrifuge (Beckman Coulter, Inc). Pelleted vesicles were resuspended in 25 ml of 50 mM HEPES (pH 6.8) and filtered through 0.45 μm pore size filters. Vesicles were again pelleted as described above and finally resuspended in 50 mM HEPES, pH 6.8. Extracellular DNA, flagella, and pili can all be co-purified. Protocol was adapted from (Perez-Cruz, 2013).
2021-11-10 | PXD020577 | Pride
Project description:Hybrid (Bound) and non-hybrid (Unbound) DNA from Hela EV was isolated using DRIP procedure as follows. Between 1-5μg of nucleic acid DNA from EVs (DNase0 treated) was incubated overnight with 1μg of anti-DNA-RNA Hybrid (S9.6) antibody (KeraFast) under rotation at 4°C in 500μl of binding buffer (10mM NaPO4 pH 7.0, 140 mM NaCl, 0.05% Triton X-100). The following day, 25μl of A/G magnetic beads (Pierce™) were washed twice in 500μl of binding buffer (30' min each wash) and added for 2h at room temperature under rotation to the S9.6+nucleic acid complex. The nucleic acids bound to the S9.6 antibody (Hybrid fraction or Bound) were separated from those unbound (Non-Hybrid or Unbound) by using a magnetic rack (which captured the Bead+Hybrid fraction). 500μl of the unbound fraction (bead-free) were transferred into a new 1.5ml tube and collected for further analysis. The Bead+Hybrid fraction was washed twice in 250μl binding buffer for 15' min at room temperature under rotation. The hybrids were then eluted with 250μl of elution buffer (50mM TRIS pH 8.0, 10mM EDTA, 0.5% SDS) for 15' min at room temperature under rotation. The elution step was repeated twice to make sure that all the hybrid molecules were collected. As a control of all there experiments to make sure, we were isolating and precipitating Hybrid DNA:RNA molecules, samples were also pre-treated with RNaseH1 (RNaseH), which degrades the RNA filament only when present in the hybrid structure.
2023-03-30 | E-MTAB-9634 | biostudies-arrayexpress
Project description:S. meliloti 1021FDC5 was grown at 30ºC in 20 ml of TY broth with shaking to late logarithmic phase (optical density at 600 nm = 1-1.2). After incubation, cells were pelleted, washed twice in MM and resuspended in 2 ml of the latter medium. For time course experiments in liquid, 0.5 ml of the inoculation culture was added to 50 ml of fresh MM. At various times, samples were removed for determining viable cells counts as well as for RNA isolation/preparation (7 and 14 hours). For experiments on plates, 20 ml of MM containing 0.7% (Semisolid) or 1.3% (Solid) agar was dispensed onto each Petri dish and allowed to gel. The plates were air dried at room temperature for 15 min. 0.1 ml of the inoculation culture was plated onto the surface of the plates and allowed to dry for 10 min. The plates were then inverted and incubated at 30ºC.
2009-04-03 | E-MEXP-1953 | biostudies-arrayexpress