Project description:Samples of oil and production water were collected from five wells of the Qinghai Oilfield, China, and subjected to GeoChip hybridization experiments for microbial functional diversity profiling. Unexpectedly, a remarkable microbial diversity in oil samples, which was higher than that in the corresponding water samples, was observed, thus challenging previously believed assumptions about the microbial diversity in this ecosystem. Hierarchical clustering separated oil and water samples, thereby indicating distinct functional structures in the samples. Genes involved in the degradation of hydrocarbons, organic remediation, stress response, and carbon cycling were significantly abundant in crude oil, which is consistent with their important roles in residing in oil. Association analysis with environmental variables suggested that oil components comprising aromatic hydrocarbons, aliphatic hydrocarbons, and a polar fraction with nitrogen-, sulfur-, and oxygen-containing compounds were mainly influential on the structure of the microbial community. Furthermore, a comparison of microbial communities in oil samples indicated that the structures were depth/temperature-dependent. To our knowledge, this is the first thorough study to profile microbial functional diversity in crude oil samples. From the Qinghai Oilfield located in the Tibetan Plateau, northwest China, oil production mixtures were taken from four oil production wells (No. 813, 516, 48 and 27) and one injection well (No. 517) in the Yue-II block. The floating oil and water phases of the production mixtures were separated overnight by gravitational separation. Subsequently, the microbial community and the characteristics of the water solution (W813, W516, W48, and W27) and floating crude oil (O813, O516, O48, and O27) samples were analyzed. A similar analysis was performed with the injection water solution (W517).
Project description:Samples of oil and production water were collected from five wells of the Qinghai Oilfield, China, and subjected to GeoChip hybridization experiments for microbial functional diversity profiling. Unexpectedly, a remarkable microbial diversity in oil samples, which was higher than that in the corresponding water samples, was observed, thus challenging previously believed assumptions about the microbial diversity in this ecosystem. Hierarchical clustering separated oil and water samples, thereby indicating distinct functional structures in the samples. Genes involved in the degradation of hydrocarbons, organic remediation, stress response, and carbon cycling were significantly abundant in crude oil, which is consistent with their important roles in residing in oil. Association analysis with environmental variables suggested that oil components comprising aromatic hydrocarbons, aliphatic hydrocarbons, and a polar fraction with nitrogen-, sulfur-, and oxygen-containing compounds were mainly influential on the structure of the microbial community. Furthermore, a comparison of microbial communities in oil samples indicated that the structures were depth/temperature-dependent. To our knowledge, this is the first thorough study to profile microbial functional diversity in crude oil samples.
Project description:The increased urban pressures are often associated with specialization of microbial communities. Microbial communities being a critical player in the geochemical processes, makes it important to identify key environmental parameters that influence the community structure and its function.In this proect we study the influence of land use type and environmental parameters on the structure and function of microbial communities. The present study was conducted in an urban catchment, where the metal and pollutants levels are under allowable limits. The overall goal of this study is to understand the role of engineered physicochemical environment on the structure and function of microbial communities in urban storm-water canals. Microbial community structure was determined using PhyoChio (G3) Water and sediment samples were collected after a rain event from Sungei Ulu Pandan watershed of >25km2, which has two major land use types: Residential and industrial. Samples were analyzed for physicochemical variables and microbial community structure and composition. Microbial community structure was determined using PhyoChio (G3)
Project description:Waste decomposition in landfills is a complex and microbe-mediated process. Understanding the microbial community composition and structure is critical for accelerating decomposition and reducing adverse impact on the environment. Here, we examined the microbial communities along with landfill depth and age (LDA) in a sanitary landfill in Beijing, China using 16s rRNA Illumina sequencing and GeoChip 4.6. We found that Clostridiales and Methanofollis were the predominant bacteria and archaea in the present landfill, respectively. Interestingly, in contrast with the decreasing trend of microbial diversity in soil, both phylogenetic and functional diversities were higher in deeper and older refuse in the landfill. Phylogenetic compositions were obviously different in the refuse with the same LDA and such difference is mainly attributed to the heterogeneity of refuse instead of random process. Nevertheless, functional structures were similar within the same LDA, indicating that microbial community assembly in the landfill may be better reflected by functional genes rather than phylogenetic identity. Mantel test and canonical correspondence analysis suggested that environmental variables had significant impacts on both phylogenetic composition and functional structure. Higher stress genes, genes for degrading toxic substances and endemic genes in deeper and older refuse indicated that they were needed for the microorganisms to survive in the more severe environments. This study suggests that landfills are a repository of stress-resistant and contaminant-degrading microorganisms, which can be used for accelerating landfill stabilization and enhancing in situ degradation.
Project description:Waste decomposition in landfills is a complex and microbe-mediated process. Understanding the microbial community composition and structure is critical for accelerating decomposition and reducing adverse impact on the environment. Here, we examined the microbial communities along with landfill depth and age (LDA) in a sanitary landfill in Beijing, China using 16s rRNA Illumina sequencing and GeoChip 4.6. We found that Clostridiales and Methanofollis were the predominant bacteria and archaea in the present landfill, respectively. Interestingly, in contrast with the decreasing trend of microbial diversity in soil, both phylogenetic and functional diversities were higher in deeper and older refuse in the landfill. Phylogenetic compositions were obviously different in the refuse with the same LDA and such difference is mainly attributed to the heterogeneity of refuse instead of random process. Nevertheless, functional structures were similar within the same LDA, indicating that microbial community assembly in the landfill may be better reflected by functional genes rather than phylogenetic identity. Mantel test and canonical correspondence analysis suggested that environmental variables had significant impacts on both phylogenetic composition and functional structure. Higher stress genes, genes for degrading toxic substances and endemic genes in deeper and older refuse indicated that they were needed for the microorganisms to survive in the more severe environments. This study suggests that landfills are a repository of stress-resistant and contaminant-degrading microorganisms, which can be used for accelerating landfill stabilization and enhancing in situ degradation. Fifteen refuse samples with five landfill depths and ages (6m/2a, 12m/4a, 18m/6a, 24m/8a and 30m/10a) were collected from a sanitary landfill in Beijing, China. Three replicates in every landfill depth and age
Project description:Sulfur metabolism in the deep-sea cold seep has been mentioned to have an important contribution to the biogeochemical cycle of sulfur in previous studies. And sulfate reducing bacteria have also been considered to be a dominant microbial population in the deep-sea cold seep and play a crucial role in this process. However, most of sulfate reducing bacteria from cold seep still cannot be purely cultured under laboratory conditions, therefore the actual sulfur metabolism pathways in sulfate reducing bacteria from the deep-sea cold seep have remained unclear. Here, we isolate and pure culture a typical sulfate reducing bacterium Desulfovibrio marinus CS1 from the sediment sample of the deep-sea cold seep in the South China Sea, which provides a probability to understand the sulfur metabolism in the cold seep.
Project description:Iron-sulfur minerals such as pyrite are found in many marine benthic habitats. At deep-sea hydrothermal vent sites they occur as massive sulfide chimneys. Hydrothermal chimneys formed by mineral precipitation from reduced vent fluids upon mixing with cold oxygenated sea water. While microorganisms inhabiting actively venting chimneys and utilizing reduced compounds dissolved in the fluids for energy generation are well studied, only little is known about the microorganisms inhabiting inactive sulfide chimneys. We performed a comprehensive meta-proteogenomic analysis combined with radiometric dating to investigate the diversity and function of microbial communities found on inactive sulfide chimneys of different ages from the Manus Basin (SW Pacific). Our study sheds light on potential lifestyles and ecological niches of yet poorly described bacterial clades dominating inactive chimney communities.
Project description:The increased urban pressures are often associated with specialization of microbial communities. Microbial communities being a critical player in the geochemical processes, makes it important to identify key environmental parameters that influence the community structure and its function.In this proect we study the influence of land use type and environmental parameters on the structure and function of microbial communities. The present study was conducted in an urban catchment, where the metal and pollutants levels are under allowable limits. The overall goal of this study is to understand the role of engineered physicochemical environment on the structure and function of microbial communities in urban storm-water canals. Microbial community structure was determined using PhyoChio (G3)
Project description:The increased urban pressures are often associated with specialization of microbial communities. Microbial communities being a critical player in the geochemical processes, makes it important to identify key environmental parameters that influence the community structure and its function.In this proect we study the influence of land use type and environmental parameters on the structure and function of microbial communities. The present study was conducted in an urban catchment, where the metal and pollutants levels are under allowable limits. The overall goal of this study is to understand the role of engineered physicochemical environment on the structure and function of microbial communities in urban storm-water canals. Water and sediment samples were collected after a rain event from Sungei Ulu Pandan watershed of >25km2, which has two major land use types: Residential and industrial. Samples were analyzed for physicochemical variables and microbial community structure and composition. Functional gene abundance was determined using GeoChip.
Project description:We sampled the microbial community at the sea ice edge in McMurdo Sound, Ross Sea at the same location (-77.62S, 165.41E) for four weeks (as described in Wu et al 2019, Nat. Comms.). We had four sampling dates corresponding to weeks 1 to 4: December 28 2014, January 6, 15, and 22 2015. Large volumes of water (150--250 L) were filtered from 1 m depth at the sea ice edge, and passed through three filters sequentially (3.0, 0.8, and 0.1 um, each 293 mm Supor filters). Filters with collected biomass were then placed in tubes with a sucrose-based preservative buffer (20 mM EDTA, 400 mM NaCl, 0.75 M sucrose, 50 mM Tris-HCl, pH 8.0) and stored at -80 C until sample processing. We extracted proteins after buffer exchange into a 3\% SDS solution as previously described Wu et al 2019, Nat. Comms.