Dataset Information

Campylobacter concisus UNSWCD GeLC-MSMS

ABSTRACT: Washed three times in NaCl (150 mM). Cells were resuspended in 1 ml TSU buffer (50 mM Tris pH 8.0, 0.1% SDS, 2.5 M urea) and lysed by two freeze-thaw cycles in liquid nitrogen. Lysate proteins (40 ug) were separated and digested. Digested peptides were separated by nano-LC using an Ultimate 3000 HPLC and autosampler system (Dionex; Amsterdam, Netherlands). Samples (1 ul) were concentrated and desalted onto a micro C18 pre-column (500 um×2 mm, Michrom Bioresources; Auburn, CA, USA) with H2O:CH3CN (98:2, 0.05% trifluoroacetic acid) at 15 ul min−1. After a 4 min wash the pre-column was switched (Valco 10 port valve; Dionex) into line with a fritless nano column (75 u×~10 cm) containing C18 media (5 u, 200 A Magic; Michrom) manufactured according to Gatlin. Peptides were eluted using a linear gradient of H2O:CH3CN (98:2, 0.1% formic acid) to H2O:CH3CN (64:36, 0.1% formic acid) at 250 nl min−1 over 30 min. High voltage (2000 V) was applied to low volume tee (Upchurch Scientific) and the column tip positioned ~0.5 cm from the heated capillary (T = 280 degrees C) of an Orbitrap Velos (Thermo Electron; Bremen, Germany) mass spectrometer. Positive ions were generated by electrospray and the Orbitrap operated in data dependent acquisition mode (DDA). A survey scan m/z 350–1750 was acquired in the Orbitrap (Resolution = 30,000 at m/z 400, with an accumulation target value of 1,000,000 ions) with lockmass enabled. Up to the 10 most abundant ions (>5,000 counts) with charge states >+2 were sequentially isolated and fragmented within the linear ion trap using collisionally induced dissociation with an activation q = 0.25 and activation time of 30 ms at a target value of 30,000 ions. M/z ratios selected for MS/MS were dynamically excluded for 30 s. Peak lists were generated using Mascot Daemon/extract_msn (Matrix Science, Thermo; London, England) using the default parameters, and submitted to the database search program Mascot (version 2.1, Matrix Science). Search parameters were: Precursor tolerance 4 ppm and product ion tolerances +/-0.4 Da Oxidation (M) and Carbamidomethyl (C) specified as variable modifications Enzyme specificity was trypsin, 1 missed cleavage was possible

INSTRUMENT(S): LTQ Orbitrap Velos Pro

ORGANISM(S): Campylobacter Concisus Unswcd

SUBMITTER: A Tay

LAB HEAD: A Tay

PROVIDER: PXD000505 | Pride | 2014-04-28

REPOSITORIES: Pride

ACCESS DATA

Dataset's files

Source:

Items per page:

1 - 5 of 48

Publications

Tools to covisualize and coanalyze proteomic data with genomes and transcriptomes: validation of genes and alternative mRNA splicing.

Pang Chi Nam Ignatius CN Tay Aidan P AP Aya Carlos C Twine Natalie A NA Harkness Linda L Hart-Smith Gene G Chia Samantha Z SZ Chen Zhiliang Z Deshpande Nandan P NP Kaakoush Nadeem O NO Mitchell Hazel M HM Kassem Moustapha M Wilkins Marc R MR

Journal of proteome research 20131112 1

Direct links between proteomic and genomic/transcriptomic data are not frequently made, partly because of lack of appropriate bioinformatics tools. To help address this, we have developed the PG Nexus pipeline. The PG Nexus allows users to covisualize peptides in the context of genomes or genomic contigs, along with RNA-seq reads. This is done in the Integrated Genome Viewer (IGV). A Results Analyzer reports the precise base position where LC-MS/MS-derived peptides cover genes or gene isoforms, ...[more]

PMID: 24152167

Similar Datasets

Project description:Bacteria were washed three times in NaCl (150 mM). Cells were resuspended in 1 ml TSU buffer (50 mM Tris pH 8.0, 0.1% SDS, 2.5 M urea) and lysed by two freeze-thaw cycles in liquid nitrogen. Lysate proteins (40 ug) were separated and digested. Digested peptides were separated by nano-LC using an Ultimate 3000 HPLC and autosampler system (Dionex; Amsterdam, Netherlands). Samples (1 ul) were concentrated and desalted onto a micro C18 pre-column (500 um×2 mm, Michrom Bioresources; Auburn, CA, USA) with H2O:CH3CN (98:2, 0.05% trifluoroacetic acid) at 15 ul min−1. After a 4 min wash the pre-column was switched (Valco 10 port valve; Dionex) into line with a fritless nano column (75 u×~10 cm) containing C18 media (5 u, 200 A Magic; Michrom) manufactured according to Gatlin. Peptides were eluted using a linear gradient of H2O:CH3CN (98:2, 0.1% formic acid) to H2O:CH3CN (64:36, 0.1% formic acid) at 250 nl min−1 over 30 min. High voltage (2000 V) was applied to low volume tee (Upchurch Scientific) and the column tip positioned ~0.5 cm from the heated capillary (T = 280 degrees C) of an Orbitrap Velos (Thermo Electron; Bremen, Germany) mass spectrometer. Positive ions were generated by electrospray and the Orbitrap operated in data dependent acquisition mode (DDA). A survey scan m/z 350–1750 was acquired in the Orbitrap (Resolution = 30,000 at m/z 400, with an accumulation target value of 1,000,000 ions) with lockmass enabled. Up to the 10 most abundant ions (>5,000 counts) with charge states >+2 were sequentially isolated and fragmented within the linear ion trap using collisionally induced dissociation with an activation q = 0.25 and activation time of 30 ms at a target value of 30,000 ions. M/z ratios selected for MS/MS were dynamically excluded for 30 s. Peak lists were generated using Mascot Daemon/extract_msn (Matrix Science, Thermo; London, England) using the default parameters, and submitted to the database search program Mascot (version 2.1, Matrix Science). Search parameters were: Precursor tolerance 4 ppm and product ion tolerances +/-0.4 Da; Oxidation (M) and Carbamidomethyl (C) specified as variable modifications, Enzyme specificity was trypsin, 1 missed cleavage was possible

Project description:Female Sprague-Dawley rats were randomly separated into two groups: i) trained (Ex group) and ii) sedentary (Cont group). Animals from the Ex group were adapted to treadmill exercise for two consecutive weeks, involving a gradual increase in the running time till 60 min/day at 20 m/min, 0% grade, 5 days/week. This exercise program remained constant until the end of the 54 weeks. Mitochondria isolation from 10 animals (5 Ex group and 5 Cont group) was performed using the conventional methods of differential centrifugation. Mitochondrial protein extracts were reduced with dithiothreitol, alkylated with iodoacetamide and digested with trypsin using the FASP procedure (18). Briefly, each sample was solubilized in 4 % SDS, 0.1 M DTT, 0.1 M HEPES and incubated for 30 min at 60 C. Then, samples were mixed with 0.2 mL of a solution of 8 M Urea, 0.1 M HEPES, pH 8.5 (UH solution), loaded into the filtration devices (3k Microcon, Millipore), centrifuged at 14,000 g for 20 min, and washed twice with UH solution. After centrifugation, the concentrates were alkylated with 50 mM iodoacetamide in UH solution (dark, 25 C, 20 min), and washed twice with UH solution. The concentrate was diluted with 0.1 mL of 50 mM ammonium bicarbonate (ABC) and digested overnight (37 C) with the addition of 2 ug of trypsin diluted in 30 uL of 50 mM ABC. The resulting tryptic peptides were collected by centrifugation and the filter were washed twice with 50 uL of 50 mM ABC. Eluted peptides were acidified with 10 uL of formic acid and cleaned up on a homemade Empore C18 column (3M, St. Paul, MN, USA) (ref) for subsequent phospho-enrichment and/or analysis by LC-MS/MS. The dried protein digest was dissolved with 10 uL (3 % ACN, 0.1 % TFA), diluted 1:5 with loading buffer (1 M glycolic acid, 5 % TFA, 80 % ACN) and phosphopeptides were enriched on TiO2-beads as previously described (19). Briefly 5 mg of "Titansphere TiO2 5 um" were suspended in 100 uL of 100 % ACN, immobilized in a pipette-column and washed using 5 uL of loading buffer. Each sample was loaded in each pipette-column and then washed with 30 uL of washing buffer (1 % TFA, 80 % ACN). Phosphopeptides were eluted from the beads with 25 uL of 25 % ACN (v/v) containing 25 % NH4OH (m/v), acidified with 10 uL of 10 % TFA and vacuum- concentrated to approximately 4 uL. Samples were finally diluted to 10 uL with H2O + 0.1% formic acid prior to injection. The peptides mixtures were analyzed by online nanoflow liquid chromatography tandem mass spectrometry (nanoLC-MS/MS) on an EASY-nLC system (Proxeon Biosystems, Odense, Denmark) connected to the LTQ Orbitrap Velos instrument (Thermo Fisher Scientific, Bremen, Germany) through a nanoelectrospray ion source. Six microliters of the peptide mixture were auto-sampled directly onto the analytical HPLC column (120 mm x75 um I.D., 3 um particle size (Nikkyo Technos Co., Ltd.) with a 120-min gradient from 5 % to 50 % ACN in 0.1 % FA. The effluent from the HPLC column was directly electrosprayed into the mass spectrometer. The LTQ Orbitrap Velos instrument was operated in data-dependent acquisition mode to automatically switch between full scan MS and MS/MS acquisition. The MS survey scan was performed in the FT cell recording a window between 350 and 2000 m/z. The resolution was set to 60 000, and the automatic gain control was set to 1,000,000 ions with a maximal acquisition time of 400 ms. The 20 most intense peptide ions with charge states great than or equal to 2 were sequentially isolated to a target value of 5,000 and fragmented in the high-pressure linear ion trap by low-energy CID with normalized collision energy of 35% Q value of 0.25, and an activation time of 10 ms. Raw files were processed using Proteome Discoverer version 1.3 (Thermo Fisher Scientific, Bremen). Peak lists were searched using Mascot software version 2.3 (Matrix Science, UK) against a SwissProt database containing entries corresponding to Rattus norvegicus (version of July 2012), a list of common contaminants, and all the corresponding decoy entries. Trypsin was chosen as enzyme and a maximum of two miscleavages were allowed. Carbamidomethylation (C) was set as a fixed modification, whereas oxidation (M) and phosphorylation (STY) were used as variable modifications. Searches were performed using a peptide tolerance of 7 ppm, a product ion tolerance of 0.5 Da. Resulting data files were filtered for FDR less than 1 % at peptide level.

Project description:MicroPoly(A)Pure kits (Ambion) were used to prepare mRNA from P. salmonis-infected and control Atlantic salmon head kidney. Head kidney mRNA samples were prepared from pooled (n = 10) infected or control kidney. Approximately 200 ng of infected or control head kidney mRNA was used as template in aRNA synthesis reactions. Two infected head kidney samples were pooled to yield 8.9 ug of aRNA, and a single control head kidney sample contained 8.4 ug of aRNA. Infected and control head kidney aRNA samples were visualized on agarose gels to check quality and quantity (data not shown). Except for the amounts of aRNA and reverse transcription (RT) primer used, head kidney target labeling reactions and microarray hybridizations were identical. Head kidney target syntheses used 2 ug of aRNA and 2 ug of random primers (Roche). RT primers were mixed with aRNA samples, and nuclease-free H2O (Invitrogen) was added to make 10 ul total volume. Samples were incubated at 70 degrees C for 4 min, then placed on ice. RT reactions included 50 mM Tris HCl pH 8.3, 75 mM KCl, 3 mM MgCl2, 10 mM DTT, 0.5 mM each dATP, dCTP, and dGTP, 0.2 mM dTTP, 0.05 mM Cy3-dUTP or Cy5-dUTP (Amersham), 40U RNAguard ribonuclease inhibitor (Amersham), and 400U Superscript II Rnase H- reverse transcriptase (Invitrogen). RT reactions were incubated at 42 degrees C for 2.5 h, followed by addition of 0.025U RNase A (Sigma) and 1.5U RNase H (New England BioLabs) and incubation at 37 degrees C for 30 min. Labeled targets were cleaned using the Qiaquick PCR purification kit (Qiagen) and precipitated, with 300 mM sodium acetate, 1 ul of 20 ug/ul glycogen (Invitrogen), and 2.5 volumes of 100% ethanol, at -20 degrees C overnight. Each labeled target was recovered by centrifugation (14,000 rpm, 4 degrees C, 1 h), washed in 70% ethanol, air-dried, and resuspended in 60 ul of hybridization buffer: 50% deionized formamide, 5X SSC, 0.1% SDS, 5 ul of 5 ug/ul oligo dT (5’T18[Q-N]3’), 5 ul of 2 ug/ul BSA (Pierce), and 2 ul of 10 ug/ul sonicated human placental DNA (Sigma). Targets were incubated at 96 degrees C for 3 min, and then at 65 degrees C until applied to microarrays. Microarrays were prepared for hybridization by washing 2 X 5 min in 0.1% SDS, washing 5 X 1 min in MilliQ H2O, immersing 3 min in 95 degrees C MilliQ H2O, and drying by centrifugation (2000 rpm, 5 min, in 50 ml conical tube). Microarray hybridizations were run in the dark under HybriSlips hybridization covers (Grace Biolabs) in slide hybridization chambers (Corning) submerged in a 45 degrees C water bath for 16 h. Coverslips were floated off in 45 degrees C (1X SSC, 0.2% SDS), and arrays were washed 1 X 10 min in 45 degrees C (1X SSC, 0.2% SDS), 3 X 4 min in room temperature (0.1X SSC, 0.1% SDS), and 4 X 4 min in room temperature 0.1X SSC. Slides were dried by centrifugation as before. Fluorescent images of hybridized arrays were acquired immediately at 10 um resolution using ScanArray Express (PerkinElmer). The Cy3 and Cy5 cyanine fluors were excited at 543 nm and 633 nm respectively, and the same laser power (90%) and photomultiplier tube (PMT) settings were used for all slides in a study (PMT 75 Cy3, PMT 63 or 64 Cy5 for head kidney study). Fluorescent intensity data were extracted from TIF images using Imagene 5.5 software (Biodiscovery). Keywords: other

Project description:MicroPoly(A)Pure kits (Ambion) were used to prepare mRNA from P. salmonis-infected and control Atlantic salmon macrophages. Infected and control (24 h incubation) macrophage mRNA samples were subjected to two rounds of amplification using the MessageAmp aRNA kit (Ambion) and manufacturer's instructions. Approximately 400 ng of macrophage mRNA was used as template in the first round of amplification, yielding 8.1 ug of infected macrophage aRNA and 7.8 ug of control macrophage aRNA. Approximately 1 ug of first-round macrophage aRNA was used as template in the second round of amplification, yielding 81.2 ug of infected macrophage aRNA and 83.3 ug of control macrophage aRNA. Infected and control macrophage aRNA samples were visualized on agarose gels to check quality and quantity. Except for the amounts of aRNA and reverse transcription (RT) primer used, macrophage target labeling reactions and microarray hybridizations were identical. Macrophage target syntheses used 5 ug of second-round aRNA and 5 ug of random primers (Roche). RT primers were mixed with aRNA samples, and nuclease-free H2O (Invitrogen) was added to make 10 ul total volume. Samples were incubated at 70 degrees C 4 min, then placed on ice. RT reactions included 50 mM Tris HCl pH 8.3, 75 mM KCl, 3 mM MgCl2, 10 mM DTT, 0.5 mM each dATP, dCTP, and dGTP, 0.2 mM dTTP, 0.05 mM Cy3-dUTP or Cy5-dUTP (Amersham), 40U RNAguard ribonuclease inhibitor (Amersham), and 400U Superscript II Rnase H- reverse transcriptase (Invitrogen). RT reactions were incubated at 42 degrees C for 2.5 h, followed by addition of 0.025U RNase A (Sigma) and 1.5U RNase H (New England BioLabs) and incubation at 37 degrees C for 30 min. Labeled targets were cleaned using the Qiaquick PCR purification kit (Qiagen) and precipitated, with 300 mM sodium acetate, 1 ul of 20 ug/ul glycogen (Invitrogen), and 2.5 volumes of 100% ethanol, at -20 degrees C overnight. Each labeled target was recovered by centrifugation (14,000 rpm, 4 degrees C, 1 h), washed in 70% ethanol, air-dried, and resuspended in 60 ul of hybridization buffer: 50% deionized formamide, 5X SSC, 0.1% SDS, 5 ul of 5 ug/ul oligo dT (5'T18[Q-N]3'), 5 ul of 2 ug/ul BSA (Pierce), and 2 ul of 10 ug/ul sonicated human placental DNA (Sigma). Targets were incubated at 96 degrees C for 3 min, and then at 65 degrees C until applied to microarrays. Microarrays were prepared for hybridization by washing 2 X 5 min in 0.1% SDS, washing 5 X 1 min in MilliQ H2O, immersing 3 min in 95 degrees C MilliQ H2O, and drying by centrifugation (2000 rpm, 5 min, in 50 ml conical tube). Microarray hybridizations were run in the dark under HybriSlips hybridization covers (Grace Biolabs) in slide hybridization chambers (Corning) submerged in a 45 degrees C water bath for 16 h. Coverslips were floated off in 45 degrees C (1X SSC, 0.2% SDS), and arrays were washed 1 X 10 min in 45 degrees C (1X SSC, 0.2% SDS), 3 X 4 min in room temperature (0.1X SSC, 0.1% SDS), and 4 X 4 min in room temperature 0.1X SSC. Slides were dried by centrifugation as before. Fluorescent images of hybridized arrays were acquired immediately at 10 um resolution using ScanArray Express (PerkinElmer). The Cy3 and Cy5 cyanine fluors were excited at 543 nm and 633 nm respectively, and the same laser power (90%) and photomultiplier tube (PMT) settings were used for all slides in a study (PMT 72 Cy3, PMT 63 or 64 Cy5 for macrophage study). Fluorescent intensity data were extracted from TIF images using Imagene 5.5 software (Biodiscovery). Keywords: other

Project description:Ammonium hydroxide and pyrrolidine eluents were dried (SpeedVac) and reconstituted in 25 ul sample loading buffer (0.1% TFA/2% acetonitrile). Eluent from phosphotyrosine immunoprecipitation was dried and reconstituted in 35 ul of the loading buffer. An LTQ Orbitrap XL (ThermoFisher) in-line with a Paradigm MS2 HPLC (Michrom bioresources) was employed for acquiring high-resolution MS and MS/MS data. Ten microliters of the phospho-enriched peptides were loaded onto a sample trap (Captrap, Bruker-Michrom) in-line with a nano-capillary column (Picofrit, 75 um i.d.x 15 um tip, New Objective) packed in-house with 10 cm of MAGIC AQ C18 reverse phase material (Michrom Bioresource). Two different gradient programs, one each for MOAC and phosphotyrosine immunoprecipitation samples, were used for peptide elution. For MOAC samples, a gradient of 5-40% buffer B (95% acetonitrile/1% acetic acid) in 135 min and 5 min wash with 100% buffer B followed by 30 min of re-equilibration with buffer A (2% acetonitrile/1% acetic acid) was used. For phosphotyrosine immunoprecipitation samples, which were a much less complex mixture of peptides, 5-40% gradient with buffer B was achieved in 75 min followed by 5 min wash with buffer B and 30 min re-equilibration. Flow rate was ~0.3 ul/min. Peptides were directly introduced into the mass spectrometer using a nano-spray source. Orbitrap was set to collect 1 MS scan between 400-2000 m/z (resolution of 30,000 @ 400 m/z) in orbitrap followed by data dependent CID spectra on top 9 ions in LTQ (normalized collision energy ~35%). Dynamic exclusion was set to 2 MS/MS acquisitions followed by exclusion of the same precursor ion for 2 min. Maximum ion injection times were set to 300 ms for MS and 100 ms for MS/MS. Automatic Gain Control (AGC) was set to 1xe6 for MS and 5000 for MS/MS. Charge state screening was enabled to discard +1 and unassigned charge states. Technical duplicate data for each of the MOAC elutions (ammonium hydroxide and pyrrolidine) and triplicate data for the phosphotyrosine immunoprecipitation samples were acquired. RAW files were converted to mzXML using msconvert and searched against the Swissprot Human protein database (2013-Jan release) appended with common proteomics contaminants and reverse sequences as decoys. Searches were performed with X!Tandem (version 2010.10.01.1) using the k-score plugin. For all searches the following search parameters were used: Parent monoisotopic mass error of 50 ppm; fragment ion error of 0.8 Daltons; allowing for up to 2 missed tryptic cleavages. Variable modifications were oxidation of Methionine (+15.9949@M), carbamidomethylation of Cysteine (+57.0214@C), and phosphorylation of Serine, Threonine, and Tyrosine (+79.9663@[STY]). The search results were then post-processed using PeptideProphet and ProteinProphet.

Project description:Flooding is a serious problem for soybean cultivation because it markedly reduces growth. We found that treatment with ABA enhances survival ratio of soybean under flooding stress. To investigate the role of ABA in soybean under flooding stress, proteomic changes were analyzed. Total protein and nuclear protein fractions from root tips of soybean seedlings that treated with flooding or flooding with ABA were analyzed. Protein samples were cleaned up with chloroform/methanol method and then subjected to in-solution digestion with trypsin and lysyl endopeptidase. Resulting peptides were analyzed on a nanospray LTQ XL Orbitrap MS (Thermo Fisher Scientific) operated in data-dependent acquisition mode with the installed Xcalibur software (version 2.0.7, Thermo Fisher Scientific). Using an Ultimate 3,000 nanoLC system (Dionex), peptides in 0.1% formic acid were loaded onto a C18 PepMap trap column (300 µm ID × 5 mm, Dionex). The peptides were eluted from the trap column and their separation and spraying were done using 0.1% formic acid in acetonitrile at a flow rate of 200 nL/min on a C18 Tip column (75 µm 1D × 120 mm, nano HPLC capillary column, NTTC-360/75-3, Nikkyo Technos) with a spray voltage of 1.5 kV. The elution was done with a linear acetonitrile gradient 8-30% in 120 min for gel free proteomics in 0.1% formic acid. Full-scan mass spectra were acquired in the Orbitrap over a mass range of 400-1,500 m/z with a resolution of 30,000. A lock mass function was used to obtain high mass accuracy. The top 10 most intense precursor ions were selected for collision-induced fragmentation in the linear ion trap at normalized collision energy of 35%. Dynamic exclusion was employed within 90 sec to prevent repetitive selection of peptides.Identification of proteins were performed by Mascot search engine (version 2.3.0.2, Matrix Science) using soybean peptide database (55,787 sequences) obtained from the soybean genome database (Phytozome version 8.0)and a common contaminants database (262 sequences). Parameters used in Mascot searches were follows: Carbamidomethylation of cysteine was set as a fixed modification, and oxidation of methionine was set as a variable modification. Trypsin was specified as the proteolytic enzyme and one missed cleavage was allowed. Peptide mass tolerance was set at 5 ppm, fragment mass tolerance was set at 0.5 Da, and peptide charge was set at +2, +3, and +4. Automatic decoy database search was performed in the search. Mascot results were filtered with Mascot percolator to improve accuracy and sensitivity in the peptide identification. False discovery rates for peptide identification of all searches were less than 1.0%. The Mascot results were used for differential analysis using SIEVE software (version 2.0, Thermo Fisher Scientific).

Project description:Flooding injury is one of the abiotic constraints on soybean growth. An experimental system established for evaluating flooding injury in soybean seedlings indicated that the degree of injury is dependent on seedling density in floodwater. To understand the molecular mechanism responsible for the injury, proteomic alterations in soybean seedlings that correlated with severity of stress were analyzed using label-free quantitative proteomics. Two-day-old soybeans, seedlings flooded for 2 days and hypocotyls of seedlings grown for 3 days after flooding were analyzed. The radicles of soybean seedlings were separated to root tips (RT), roots without tip (RwoT) and hypocotyls (Hypo). Protein was extracted from these organs by TCA/Acetone method. Protein samples were cleaned up with chloroform/methanol method and then subjected to in-solution digestion with trypsin. Resulting peptides were analyzed on a nanospray LTQ XL Orbitrap MS (Thermo Fisher Scientific) operated in data-dependent acquisition mode with the installed Xcalibur software (version 2.0.7, Thermo Fisher Scientific). Using an Ultimate 3,000 nanoLC system (Dionex), peptides in 0.1% formic acid were loaded onto a C18 PepMap trap column (300 µm ID × 5 mm, Dionex). The peptides were eluted from the trap column and their separation and spraying were done using 0.1% formic acid in acetonitrile at a flow rate of 200 nL/min on a C18 Tip column (75 µm 1D × 120 mm, nano HPLC capillary column, NTTC-360/75-3, Nikkyo Technos) with a spray voltage of 1.5 kV. The elution was done with a linear acetonitrile gradient 8-30% in 120 min for gel free proteomics in 0.1% formic acid. Full-scan mass spectra were acquired in the Orbitrap over a mass range of 400-1,500 m/z with a resolution of 30,000. A lock mass function was used to obtain high mass accuracy. The top 6 most intense precursor ions were selected for collision-induced fragmentation in the linear ion trap at normalized collision energy of 35%. Dynamic exclusion was employed within 90 sec to prevent repetitive selection of peptides.Identification of proteins were performed by Mascot search engine (version 2.3.0.2, Matrix Science) using soybean peptide database (55,787 sequences) obtained from the soybean genome database (Phytozome version 8.0)and a common contaminants database (262 sequences). Parameters used in Mascot searches were follows: Carbamidomethylation of cysteine was set as a fixed modification, and oxidation of methionine was set as a variable modification. Trypsin was specified as the proteolytic enzyme and one missed cleavage was allowed. Peptide mass tolerance was set at 5 ppm, fragment mass tolerance was set at 0.5 Da, and peptide charge was set at +2, +3, and +4. Automatic decoy database search was performed in the search. Mascot results were filtered with Mascot percolator to improve accuracy and sensitivity in the peptide identification. False discovery rates for peptide identification of all searches were less than 1.0%. The Mascot results were used for differential analysis using SIEVE software (version 1.3, Thermo Fisher Scientific)

Project description:The experiment consists of M.hyp 232 cultures digests analyzed on two mass specs, LTQ Velos Pro and LTQ FT Ultra LTQ Velos Pro: Six cell culture replicates of M.hyo 232 were hydrophobically separated using tree detergents: Digitonin, Tween, and SDS. Each francion, including the insoluble pellet, was trypsin digested and then cleaned using an SCX trap follwed by a RP trap to remove detergents. Each fraction was sepated using a Dionex U3000 splitless nanoflow system operating at 333 nl per minute using a gradient of 2% ACN to 50% ACN in 4 hours. Eluate was analyzed using an LTQ Velos Pro mass spectrometer with 20 MS/MS scans of the 20 most intense peaks from each MS scan. Dynamic exclusion was enable for 3 minutes for each m/z with a repeat count of 1. LTQ FT Ultra: Two cell pellets for high resolution analysis were lysed and trypsin digested. Digested peptides were dried, resuspended in 20 mM KH2PO4, 20% ACN, pH 3 (Buffer A) in 2.5 µL and transferred to low retention vials in preparation for separation using an Ultimate 3000 configured for 2D-LC. Each sample was loaded at 15 µl/min onto an SCX microtrap for the first dimension of separation, involving SCX steps of Buffer A + 0, 5, 10, 15, 20, 25, 30, 40, 50, 100, 250, 500, and 1000 mM KCl. For the second dimension of separation, each eluted salt step was desalted with an inline peptide microtrap with 2% ACN, 0.1% FA at 5 µl/min. Once desalted, the microtrap was switched into line with a fritless nano column (75µm x ~10cm) containing C18 media (5µ, 200 Å Magic, Michrom). Peptides were eluted using a gradient of 2% to 36% ACN, 0.1% FA at 350 nl/min over 60 min and electrospray ionized for analysis using an LTQ FT Ultra mass spectrometer. A survey scan m/z 350-1750 was acquired in the FT ICR cell (Resolution = 100,000 at m/z 400, with an accumulation target value of 1,000,000 ions). Up to the 6 most abundant ions (>3,000 counts) with charge states > +2 were sequentially isolated and fragmented within the linear ion trap using collisionally induced dissociation with an activation q = 0.25 and activation time of 30 ms at a target value of 30,000 ions. M/z ratios selected for MS/ MS were dynamically excluded for 30 seconds. Analysis: X!tandem searches were performed using the Mycoplasma hyopneumoniae strain 232 reference protein set from NCBI. The only difference between the searches for the LTQ Velos and LTQ FT was the precursor mass tolenance being set to +-1500ppm and +-24ppm respectively. Decoy searches were performed and the data filtered at e-value <= 0.01 with single peptide proteins discarded. These results are included in the submission as two tab-delimited text files.

			Action	DRS
	NOK_11_8_10_1.raw	Raw
	NOK_11_8_10_10.raw	Raw
	NOK_11_8_10_11.raw	Raw
	NOK_11_8_10_12.raw	Raw
	NOK_11_8_10_2.raw	Raw