Project description:Contaminated aquifer (Dusseldorf-Flinger, Germany) templates extracted from 5 sediment depths ranging between 6.4 and 8.4 m below ground and over 3 years of sampling were amplified for amplicon pyrosequencing using the primers Ba27f (5’-aga gtt tga tcm tgg ctc ag-3’) and Ba519r (5’- tat tac cgc ggc kgc tg-3’), extended as amplicon fusion primers with respective primer A or B adapters, key sequence and multiplex identifiers (MID) as recommended by 454/Roche. Amplicons were purified and pooled as specified by the manufacturer. Emulsion PCR (emPCR), purification of DNA-enriched beads and sequencing run were performed following protocols and using a 2nd generation pyrosequencer (454 GS FLX Titanium, Roche) as recommended by the developer. Quality filtering of the pyrosequencing reads was performed using the automatic amplicon pipeline of the GS Run Processor (Roche), with a slight modification concerning the valley filter (vfScanAllFlows false instead of TiOnly) to extract the sequences. Demultiplexed raw reads were furhter trimmed for quality and lenght (>250 bp).
Project description:Next-generation sequencing (NGS) technology applications like RNA-sequencing (RNA-seq) have dramatically expanded the potential for novel genomics discoveries, but the proliferation of various platforms and protocols for RNA-seq has created a need for reference data sets to help gauge the performance characteristics of these disparate methods. Here we describe the results of the ABRF-NGS Study on RNA-seq, which leverages replicate experiments across multiple sites using two reference RNA standards tested with four protocols (polyA selected, ribo-depleted, size selected, and degraded RNA), and examined across five NGS platforms (IlluminaM-bM-^@M-^Ys HiSeqs, Life TechnologiesM-bM-^@M-^Y Personal Genome Machine and Proton, Roche 454 GS FLX, and Pacific Biosciences RS). These results show high (R2 >0.9) intra-platform consistency across test sites, high inter-platform concordance (R2 >0.8) for transcriptome profiling, and a large set of novel splice junctions observed across all platforms. Also, we observe that protocols using ribosomal RNA depletion can both salvage degraded RNA samples and also be readily compared to polyA-enriched fractions. These data provide a broad foundation for standardization, evaluation and improvement of RNA-seq methods. Two reference RNA standards tested with four protocols (polyA selected, ribo-depleted, size selected, and degraded RNA), and examined across five NGS platforms (IlluminaM-bM-^@M-^Ys HiSeqs, Life TechnologiesM-bM-^@M-^Y Personal Genome Machine and Proton, Roche 454 GS FLX, and Pacific Biosciences RS). Please note that the samples were named following the ABRF-Platform-Site-Sample-Replicate# format. For example, ABRF-454-CNL-A-1 means Sample A was run on 454 platform at Cornell and this is the first replicate, and ABRF-454-CNL-A-2 means the same exact sample was ran with same machine at same location and is 2nd replicate.
Project description:Next-generation sequencing (NGS) technology applications like RNA-sequencing (RNA-seq) have dramatically expanded the potential for novel genomics discoveries, but the proliferation of various platforms and protocols for RNA-seq has created a need for reference data sets to help gauge the performance characteristics of these disparate methods. Here we describe the results of the ABRF-NGS Study on RNA-seq, which leverages replicate experiments across multiple sites using two reference RNA standards tested with four protocols (polyA selected, ribo-depleted, size selected, and degraded RNA), and examined across five NGS platforms (Illumina’s HiSeqs, Life Technologies’ Personal Genome Machine and Proton, Roche 454 GS FLX, and Pacific Biosciences RS). These results show high (R2 >0.9) intra-platform consistency across test sites, high inter-platform concordance (R2 >0.8) for transcriptome profiling, and a large set of novel splice junctions observed across all platforms. Also, we observe that protocols using ribosomal RNA depletion can both salvage degraded RNA samples and also be readily compared to polyA-enriched fractions. These data provide a broad foundation for standardization, evaluation and improvement of RNA-seq methods. Two reference RNA standards tested with four protocols (polyA selected, ribo-depleted, size selected, and degraded RNA), and examined across five NGS platforms (Illumina’s HiSeqs, Life Technologies’ Personal Genome Machine and Proton, Roche 454 GS FLX, and Pacific Biosciences RS). Please note that the samples were named following the ABRF-Platform-Site-Sample-Replicate# format. For example, ABRF-454-CNL-A-1 means Sample A was run on 454 platform at Cornell and this is the first replicate, and ABRF-454-CNL-A-2 means the same exact sample was ran with same machine at same location and is 2nd replicate.
Project description:Next-generation sequencing (NGS) technology applications like RNA-sequencing (RNA-seq) have dramatically expanded the potential for novel genomics discoveries, but the proliferation of various platforms and protocols for RNA-seq has created a need for reference data sets to help gauge the performance characteristics of these disparate methods. Here we describe the results of the ABRF-NGS Study on RNA-seq, which leverages replicate experiments across multiple sites using two reference RNA standards tested with four protocols (polyA selected, ribo-depleted, size selected, and degraded RNA), and examined across five NGS platforms (Illumina’s HiSeqs, Life Technologies’ Personal Genome Machine and Proton, Roche 454 GS FLX, and Pacific Biosciences RS). These results show high (R2 >0.9) intra-platform consistency across test sites, high inter-platform concordance (R2 >0.8) for transcriptome profiling, and a large set of novel splice junctions observed across all platforms. Also, we observe that protocols using ribosomal RNA depletion can both salvage degraded RNA samples and also be readily compared to polyA-enriched fractions. These data provide a broad foundation for standardization, evaluation and improvement of RNA-seq methods. Two reference RNA standards tested with four protocols (polyA selected, ribo-depleted, size selected, and degraded RNA), and examined across five NGS platforms (Illumina’s HiSeqs, Life Technologies’ Personal Genome Machine and Proton, Roche 454 GS FLX, and Pacific Biosciences RS). Please note that the samples were named following the ABRF-Platform-Site-Sample-Replicate# format. For example, ABRF-454-CNL-A-1 means Sample A was run on 454 platform at Cornell and this is the first replicate, and ABRF-454-CNL-A-2 means the same exact sample was ran with same machine at same location and is 2nd replicate.
Project description:Next-generation sequencing (NGS) technology applications like RNA-sequencing (RNA-seq) have dramatically expanded the potential for novel genomics discoveries, but the proliferation of various platforms and protocols for RNA-seq has created a need for reference data sets to help gauge the performance characteristics of these disparate methods. Here we describe the results of the ABRF-NGS Study on RNA-seq, which leverages replicate experiments across multiple sites using two reference RNA standards tested with four protocols (polyA selected, ribo-depleted, size selected, and degraded RNA), and examined across five NGS platforms (Illumina’s HiSeqs, Life Technologies’ Personal Genome Machine and Proton, Roche 454 GS FLX, and Pacific Biosciences RS). These results show high (R2 >0.9) intra-platform consistency across test sites, high inter-platform concordance (R2 >0.8) for transcriptome profiling, and a large set of novel splice junctions observed across all platforms. Also, we observe that protocols using ribosomal RNA depletion can both salvage degraded RNA samples and also be readily compared to polyA-enriched fractions. These data provide a broad foundation for standardization, evaluation and improvement of RNA-seq methods. Two reference RNA standards tested with four protocols (polyA selected, ribo-depleted, size selected, and degraded RNA), and examined across five NGS platforms (Illumina’s HiSeqs, Life Technologies’ Personal Genome Machine and Proton, Roche 454 GS FLX, and Pacific Biosciences RS). Please note that the samples were named following the ABRF-Platform-Site-Sample-Replicate# format. For example, ABRF-454-CNL-A-1 means Sample A was run on 454 platform at Cornell and this is the first replicate, and ABRF-454-CNL-A-2 means the same exact sample was ran with same machine at same location and is 2nd replicate.
Project description:Four cDNA libraries from immature embryos, mature embryos, microspore derived embryos and mature leaves were constructed. cDNA were sequenced by the Roche-454 GS-FLX.
Project description:Contaminated aquifer (Dusseldorf-Flinger, Germany) templates extracted from 5 sediment depths ranging between 6.4 and 8.4 m below ground and over 3 years of sampling were amplified for amplicon pyrosequencing using the primers Ba27f (5’-aga gtt tga tcm tgg ctc ag-3’) and Ba519r (5’- tat tac cgc ggc kgc tg-3’), extended as amplicon fusion primers with respective primer A or B adapters, key sequence and multiplex identifiers (MID) as recommended by 454/Roche. Amplicons were purified and pooled as specified by the manufacturer. Emulsion PCR (emPCR), purification of DNA-enriched beads and sequencing run were performed following protocols and using a 2nd generation pyrosequencer (454 GS FLX Titanium, Roche) as recommended by the developer. Quality filtering of the pyrosequencing reads was performed using the automatic amplicon pipeline of the GS Run Processor (Roche), with a slight modification concerning the valley filter (vfScanAllFlows false instead of TiOnly) to extract the sequences. Demultiplexed raw reads were furhter trimmed for quality and lenght (>250 bp). 15 samples examined in total from important plume zones of the aquifer sampled in Feb. 2006, Sep. 2008 and Jun. 2009 (5 every year of sampling).
Project description:Next-generation sequencing (NGS) technology applications like RNA-sequencing (RNA-seq) have dramatically expanded the potential for novel genomics discoveries, but the proliferation of various platforms and protocols for RNA-seq has created a need for reference data sets to help gauge the performance characteristics of these disparate methods. Here we describe the results of the ABRF-NGS Study on RNA-seq, which leverages replicate experiments across multiple sites using two reference RNA standards tested with four protocols (polyA selected, ribo-depleted, size selected, and degraded RNA), and examined across five NGS platforms (IlluminaM-bM-^@M-^Ys HiSeqs, Life TechnologiesM-bM-^@M-^Y Personal Genome Machine and Proton, Roche 454 GS FLX, and Pacific Biosciences RS). These results show high (R2 >0.9) intra-platform consistency across test sites, high inter-platform concordance (R2 >0.8) for transcriptome profiling, and a large set of novel splice junctions observed across all platforms. Also, we observe that protocols using ribosomal RNA depletion can both salvage degraded RNA samples and also be readily compared to polyA-enriched fractions. These data provide a broad foundation for standardization, evaluation and improvement of RNA-seq methods. Two reference RNA standards tested with four protocols (polyA selected, ribo-depleted, size selected, and degraded RNA), and examined across five NGS platforms (IlluminaM-bM-^@M-^Ys HiSeqs, Life TechnologiesM-bM-^@M-^Y Personal Genome Machine and Proton, Roche 454 GS FLX, and Pacific Biosciences RS).
Project description:Flower-lotus with many attractive floral characteristics has been studied and discussed the most. These characteristics are used as the standards of the classification in most cases, and always attracted the attention of lotus breeders on improvement program because of associating with ornamental and economic values of lotus. However, molecular mechanisms underlying the formation of these attractive floral features still remain largely unknown. Transcriptome sequencing technique has been established as an efficient approach for gene discovery and expression pattern identification. For some plants, a lot of important genes involved in plant critical metabolisms have been successfully identified by this technique. In the study, mass sequence data obtained from the deep sequencing of a mixed flower-bud cDNA pool from three individuals of N. nucifera provide a platform to comprehensively understand the processes of flower formation and development at the molecular level, and will greatly facilitate the genetic improvement of ornamental characteristics and the directive molecular breeding for lotus in the future. A mixed cDNA pool from young flower-buds (35-40mm in length) of three accessions of N. nucifera were used for deep sequencing using 454 GS-FLX Titanium.