Three-dimensional bioprinting enables creation of tissue-informed glioblastoma microenvironments for modeling complex cellular interactions
Ontology highlight
ABSTRACT:
PROVIDER: PRJNA613195 | ENA |
REPOSITORIES: ENA
Dataset's files
| Action | DRS | |||
|---|---|---|---|---|
| SRR11342385.fastq.gz | Fastqsanger.gz | |||
| SRR11342386.fastq.gz | Fastqsanger.gz | |||
| SRR11342387.fastq.gz | Fastqsanger.gz | |||
| SRR11342388.fastq.gz | Fastqsanger.gz | |||
| SRR11342389.fastq.gz | Fastqsanger.gz |
Items per page: 5 1 - 5 of 22 |
Similar Datasets
Project description:Brain tumors are dynamic complex ecosystems with multiple cell types. To model the brain tumor microenvironment in a reproducible and scalable system, we developed a rapid three-dimensional (3D) bioprinting method to construct clinically relevant biomimetic tissue models. In recurrent glioblastoma, macrophages/microglia prominently contribute to the tumor mass. To parse the function of macrophages in 3D, we compared the growth of glioblastoma stem cells (GSCs) alone or with astrocytes and neural precursor cells (NPCs) in a hyaluronic acid (HA)-rich hydrogel, with or without macrophages. Bioprinted constructs integrating macrophage recapitulate patient-derived transcriptional profiles predictive of patient survival, maintenance of stemness, invasion, and drug resistance. Whole genome CRISPR screening with bioprinted complex systems identified unique molecular dependencies in GSCs, relative to sphere culture. Multicellular bioprinted models serve as a scalable and physiologic platform to interrogate drug sensitivity, cellular crosstalk, invasion, context-dependent functional dependencies, as well as immunologic interactions in a species-matched neural environment.
2020-11-09 | GSE147147 | GEO
Project description:Bioprinting is an emerging additive manufacturing approach to the fabrication of patient-specific, implantable three-dimensional (3D) constructs for regenerative medicine. However, developing cell-compatible bioinks with high printability, structural stability, biodegradability, and bioactive characteristics is still a primary challenge for translating 3D bioprinting technology to preclinical and clinal models. To overcome this challenge, we develop a nanoengineered ionic covalent entanglement (NICE) bioink formulation for 3D bone bioprinting. The NICE bioinks allow precise control over printability, mechanical properties, and degradation characteristics, enabling custom 3D fabrication of mechanically resilient, cellularized structures. We demonstrate cell- induced remodeling of 3D bioprinted scaffolds over 60 days, demonstrating deposition of nascent extracellular matrix proteins. Interestingly, the bioprinted constructs induce endochondral differentiation of encapsulated human mesenchymal stem cells (hMSCs) in absence of osteoinducing agents such as dexamethasone or bone morphogenic protein-2 (BMP-2). Using next-generation transcriptome sequencing (RNA-seq) technology, we establish the role of nanosilicates, a bioactive component of NICE bioink, to stimulate endochondral differentiation at the transcriptome level. Overall, the osteoinductive bioink has the ability to induce formation of osteo-related mineralized extracellular matrix by encapsulatedhMSCsingrowthfactor-freeconditions.Furthermore,wedemonstratedtheabilityofNICEbioinktofabricatepatient-specific, implantable 3D scaffolds for repair of craniomaxillofacial bone defects. We envision transformation of this NICE bioink technology toward a realistic clinical process for 3D bioprinting patient-specific bone tissue for regenerative medicine.
2020-03-04 | GSE146309 | GEO
Project description:Nanoengineered Osteoinductive Bioink for Three-Dimensional Bioprinting Bone Tissue
| PRJNA610078 | ENA
Project description:Capturing cell-to-cell and cell-to-environment signals in a defined 3 dimensional (3D) microenvironment is key to study cellular functions, including cellular reprogramming towards tissue regeneration. A major challenge in current culturing methods is that these methods cannot accurately capture this multicellular 3D microenvironment. In this study, we established the framework of 3D bioprinting with plant cells to study cell viability, cell division, and cell identity. To investigate the cellular reprogramming underlying the initial cell divisions prior to microcallus formation, we collected RNA from isolated differentiated root cells immediately, 1, and 3 days after bioprinting. We showed the cell cycle re-entry of the isolated Arabidopsis and soybean cells leading to the formation of microcalli and of which the timing coincides with the induction of core cell cycle genes and regeneration-related genes. Finally, we showed that the identity of isolated cells of Arabidopsis roots expressing endodermal markers maintained longer periods of time. The framework established in this study paves the way for a general use of 3D bioprinting for studying cellular reprogramming and cell cycle re-entry towards tissue regeneration.
2022-08-15 | GSE208176 | GEO
Project description:Studying primary Chronic Lymphocytic Leukemia cells in vitro is very challenging due to their short survival in culture, and also due to the fact that traditional two-dimensional in vitro models lack cellular and spatial complexity present in vivo. Based on these considerations, we exploited three-dimensional (3D) bioprinting to advance in vitro models for CLL. Through RNA sequencing (RNAseq) analysis, we observed a consistent difference in gene expression profile between 2D and 3D samples, indicating a different behavior of the cells in the two different culture settings.
2021-04-21 | GSE163977 | GEO
Project description:Liver is dynamic, heterogeneous, and each cell type acts in concert to regulate its function. In vitro morphogenesis is limited, and self-assembled biliary and blood vessels system are absent from manufactured liver tissues. The combination of bioprinting and organoid technique offers spatial and cellular control over three-dimensional (3D) organ tissue manufacturing, allowing to build liver tissues with self-assembled structure in vitro. We developed a high-throughput PDMS microwell platform (PMP) generating uniform and functional hepatic organoid building blocks (HOBBs) which displayed cellular crosstalk and self-assembled structure. For bioprinting process, we developed three-level temperature control system and new quadratic material, i.e., alginate-gelatin-collagen-laminin (AGCL) biomaterial, realizing reproducible construction of liver tissues with requisite cellular density. Under long-term differentiation, bioprinted liver tissues exhibited enhanced hepatobiliary function, intrahepatic bile duct networks and angiogenic potential. To investigate the regulatory mechanisms of multicellular crosstalk and self-assembled of HOBBS, biliary branching morphogenesis, biomimetic liver tissue formation, and angiogenesis of HABs, transcriptome analysis was performed.
2024-07-24 | GSE230404 | GEO
Project description:Three-dimensional brain-like microenvironments facilitate the direct reprogramming of fibroblasts into therapeutic neurons
| PRJNA472725 | ENA
Project description:Pterygium is an ocular surface disorder with high prevalence that can lead to vision impairment. As a pathological outgrowth of conjunctiva, pterygium involves neovascularization and chronic inflammation, but its pathogenesis remains largely unknown. Over the last decade, various types of disease models have been built to study pterygium. Here, we developed a 3D multicellular in vitro pterygium model using the digital light processing (DLP)-based 3D bioprinting of human conjunctival stem cells (hCjSCs). A novel feeder-free culture system was adopted and efficiently expanded the primary hCjSCs with homogeneity, stemness and differentiation potency. The DLP-based 3D bioprinting was able to fabricate hydrogel scaffolds that support the viability and biological integrity of the encapsulated hCjSCs. The bioprinted 3D pterygium model was fabricated with hCjSCs, immune cells and vascular cells to recapitulate the disease microenvironment. Transcriptomic analysis using RNA sequencing (RNA-seq) identified a distinct profile correlated to inflammation response, angiogenesis, and epithelial mesenchymal transition in the bioprinted 3D pterygium model. In addition, the pterygium signatures and disease relevance of the bioprinted model were validated with the public RNA-seq data from patient-derived pterygium tissues. By integrating the stem cell technology and 3D bioprinting, this is the first reported 3D in vitro disease model for pterygium that can be utilized by future studies towards the personalized medicine and the drug screening.
2022-06-01 | GSE180343 | GEO
Project description:The extracellular matrix (ECM) is a critical cue to direct tumorigenesis and metastasis. Although two-dimensional (2D) culture models have been widely employed to understand breast cancer microenvironments over the past several decades, the 2D models still exhibit limited success. Overwhelming evidence supports that three dimensional (3D), physiologically relevant culture models are required to better understand cancer progression and develop more effective treatment. Such platforms should include cancer-specific architectures, relevant physicochemical signals, stromal-cancer cell interactions, immune components, vascular components, and cell-ECM interactions found in patient tumors. This review briefly summarizes how cancer microenvironments (stromal component, cell-ECM interactions, and molecular modulators) are defined and what emerging technologies (perfusable scaffold, tumor stiffness, supporting cells within tumors and complex patterning) can be utilized to better mimic native-like breast cancer microenvironments. Furthermore, this review emphasizes biophysical properties that differ between primary tumor ECM and tissue sites of metastatic lesions with a focus on matrix modulation of cancer stem cells, providing a rationale for investigation of underexplored ECM proteins that could alter patient prognosis. To engineer breast cancer microenvironments, we categorized technologies into two groups: (1) biochemical factors modulating breast cancer cell-ECM interactions and (2) 3D bioprinting methods and its applications to model breast cancer microenvironments. Biochemical factors include matrix-associated proteins, soluble factors, ECMs, and synthetic biomaterials. For the application of 3D bioprinting, we discuss the transition of 2D patterning to 3D scaffolding with various bioprinting technologies to implement biophysical cues to model breast cancer microenvironments.
| S-EPMC5978274 | biostudies-literature
Project description:Rapid 3D Bioprinting of Multicellular Model Recapitulating Pterygium Microenvironment
| PRJNA748455 | ENA