Addition of Exogenous AI-2 to C. jejuni 11168 Wild Type and LuxS01.
Ontology highlight
ABSTRACT:
ORGANISM(S): Campylobacter jejuni
SUBMITTER: Kathryn Holmes
PROVIDER: E-GEOD-18427 | biostudies-arrayexpress |
REPOSITORIES: biostudies-arrayexpress
Similar Datasets
Project description:Transcriptional profiling of Campylobacter jejuni NCTC 11168 wild type versus LuxS01 mutant strain grown in a minimal culture medium (MEM- α ) versus complex culture medium (MHB). Two-condition experiment, the parent versus the mutant 11168 strains were grown in 2 types of culture medium for comparison. Control microarrays included comparing wild type vs wild type in the same culture medium. 4 biological replicates for each test microarray and 2 biological replicates for each control microarray, independently grown and harvested.
2010-06-21 | E-GEOD-18451 | biostudies-arrayexpress
Project description:This SuperSeries is composed of the following subset Series: GSE18427: Addition of Exogenous AI-2 to C. jejuni 11168 Wild Type and LuxS01. GSE18451: Wild Type 11168 versus LuxS01 Mutant Cultured in MHB and MEM- ? media Refer to individual Series
2009-10-08 | E-GEOD-18455 | biostudies-arrayexpress
Project description:Transcriptional profiling of Campylobacter jejuni NCTC 11168 wild type and LuxS01 mutant strains comparing the effects of exogenously added in vitro-produced autoinducer 2 (AI-2) versus a control buffer to both strains.
2009-10-08 | GSE18427 | GEO
Project description:Escherichia coli strain MG1655 was grown to mid-log phase in defined aerobic media. One sample was treated with 30 µM CORM-3, the other sample was a control. The volume (30 ml), temperature (37oC) and shaking (200 rpm) were constant. After 15 min of exposure to CO-RM, samples were taken from treated and control cells, harvested into ice cold phenol ethanol (187 µl phenol, 3.56 ml ethanol) to stabilize RNA, and total RNA was purified using Qiagenâs RNeasy Mini kit as recommended by suppliers. RNA was quantified using a BioPhotometer (Eppendorf). Biological experiments were carried out four times, and a dye swap performed for each experiment, providing two technical repeats for each of the four biological repeats. Cells were grown in defined minimal medium (aerobic). Final concentrations are: glycerol (54 mM), K2HPO4 (23 mM), KH2HPO4 (7.3 mM), NH4Cl (18.7 mM), CaCl2 (69 µM), and K2SO4 (15 mM). Trace elements were added at 10 ml per l; final concentrations are: 134 µM EDTA, 31 µM FeCl3, 6.15 µM ZnO, CuCl2 0.57 µM, CoNo3 0.34 µM, 1.6 µM H3BO3, 1 µM ammonium molybdenate and 1 µM sodium selenite. MgCl2 was added at 1 ml per l. All chemicals were of AnalaR grade of purity or higher. E. coli strain MG1655 was grown in 250 ml side arm flasks in 30 ml of the above defined minimal media (aerobic). CORM-3 was added at a final concentration of 30 µM, chosen because it causes only a slight reduction in the growth rate. Cells were grown to mid-log (Klett values of 30-40) before addition of CO-RM. The total 30 ml volume was harvested into ice cold phenol ethanol (187 µl phenol, 3.56 ml ethanol) to stabilize RNA, and total RNA was purified using Qiagenâs RNeasy Mini kit as recommended by suppliers. RNA was quantified using a BioPhotometer (Eppendorf). Biological experiments were carried out four times, and a dye swap performed for each experiment, providing two technical repeats for each of the four biological repeats. Equal quantities of RNA from control and CO-RM-treated cells were labelled by using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes (Perkin Elmer). For each microarray slide, one sample was labelled with Cy3-dCTP, while the other sample was labelled with Cy5-dCTP. RNA (approximately 9 micrograms) was annealed to 4.5 micrograms pd(N)6 random hexamers (Amersham Biosciences) by heating at 65 oC for 10 min, followed by 10 min at 22 oC and cooling on ice for 2 min. This was supplemented with 6 microlitres of 5à First-strand buffer (Invitrogen), 2.5 microlitres dNTP mixture (5 mM each dATP, dTTP, dGTP and 2 mM dCTP), 3 microlitres 0.1 M DTT, 2 microlitres 1 mM Cy3 or Cy5 (Perkin Elmer) and 1.5 microlitre Superscript III reverse transcriptase (200 U) (Invitrogen). This was incubated at 42 oC for 3 hours. The reaction was terminated by the addition of NaOH (7.5 microlitres of 1M) and HCl (7.5 microlitres of 1M) before the addition of TE buffer (300 microlitres). Labelled cDNA was purified using a Qiaquick PCR purification kit (Qiagen). The Cy3-dCTP-labelled sample was mixed with the Cy5-dCTP-labelled sample, vacuum dried and re-suspended in 120 microlitres salt-based hybridisation buffer (supplied with the microarray slides). This was heated at 95 oC for 3 min then cooled on ice for 3 min. The mixture was pipetted onto a microarray slide, sealed with a GeneFrame and coverslip in a hybridization chamber and incubated for 18 h at 42 °C. Following hybridization, microarray slides (minus GeneFrame and coverslip) were washed in a series of pre-warmed (37 °C) SSC buffers for 5 min each at 37oC: 2à SSC/0.1 % SDS, 1à SSC, 0.2à SSC and 0.01à SSC. Microarray slides were dried by centrifugation at 1500 à g for 2 min before scanning. Slides were scanned on an Affymetrix 428 scanner. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). Spots automatically flagged as bad, negative or poor in the Imagene software were removed before the statistical analysis was carried out in GeneSight. The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values. Biological experiments (i.e. a comparison of control and plus CO-RM cells) were carried out four times, and a dye swap performed for each experiment, providing two technical repeats for each of the four biological repeats. Data from the independent experiments were combined. Genes that were differentially expressed ⥠twofold and displayed and P value of < 0.05 (as determined by a t test) were defined as being statistically significantly differentially transcribed.
2010-06-24 | E-GEOD-12877 | biostudies-arrayexpress
Project description:Escherichia coli strain MG1655 was grown to mid-log phase in defined anaerobic media. One sample was treated with 100 µM CORM-3, the other sample was a control. The volume (175 ml), temperature (37oC) and stirring (200 rpm) were constant. After 15 min of exposure to CO-RM, samples were taken from treated and control cells, harvested into ice cold phenol ethanol (187 µl phenol, 3.56 ml ethanol) to stabilize RNA, and total RNA was purified using Qiagenâs RNeasy Mini kit as recommended by suppliers. RNA was quantified using a BioPhotometer (Eppendorf). Biological experiments were carried out four times, and a dye swap performed for each experiment, providing two technical repeats for each of the four biological repeats. Cells were grown in defined minimal medium (anaerobic). Final concentrations are: glycerol (54 mM), K2HPO4 (23 mM), KH2HPO4 (7.3 mM), NH4Cl (18.7 mM), CaCl2 (69 µM), K2SO4 (15 mM), sodium fumarate (50 mM), Luria Broth (5%) and can amino acids (0.1%). Trace elements were added at 10 ml per l; final concentrations are: 134 µM EDTA, 31 µM FeCl3, 6.15 µM ZnO, CuCl2 0.57 µM, CoNo3 0.34 µM, 1.6 µM H3BO3, 1 µM ammonium molybdenate and 1 µM sodium selenite. MgCl2 was added at 1 ml per l. All chemicals were of AnalaR grade of purity or higher. E. coli strain MG1655 was grown in mini fermenter vessels in 175 ml of the above defined minimal media (anaerobic). The vessel was continually sparged with N2 to ensure anaerobiosis. CORM-3 was added at a final concentration of 100 µM, chosen because it causes only a slight reduction in the growth rate. Cells were grown to mid-log (OD600 of 0.4) before addition of CO-RM. For RNA extraction, 30 ml was harvested into ice cold phenol ethanol (187 µl phenol, 3.56 ml ethanol) to stabilize RNA, and total RNA was purified using Qiagenâs RNeasy Mini kit as recommended by suppliers. RNA was quantified using a BioPhotometer (Eppendorf). Biological experiments were carried out four times, and a dye swap performed for each experiment, providing two technical repeats for each of the four biological repeats. Equal quantities of RNA from control and CO-RM-treated cells were labelled by using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes (Perkin Elmer). For each microarray slide, one sample was labelled with Cy3-dCTP, while the other sample was labelled with Cy5-dCTP. RNA (approximately 9 micrograms) was annealed to 4.5 micrograms pd(N)6 random hexamers (Amersham Biosciences) by heating at 65 oC for 10 min, followed by 10 min at 22 oC and cooling on ice for 2 min. This was supplemented with 6 microlitres of 5à First-strand buffer (Invitrogen), 2.5 microlitres dNTP mixture (5 mM each dATP, dTTP, dGTP and 2 mM dCTP), 3 microlitres 0.1 M DTT, 2 microlitres 1 mM Cy3 or Cy5 (Perkin Elmer) and 1.5 microlitre Superscript III reverse transcriptase (200 U) (Invitrogen). This was incubated at 42 oC for 3 hours. The reaction was terminated by the addition of NaOH (7.5 microlitres of 1M) and HCl (7.5 microlitres of 1M) before the addition of TE buffer (300 microlitres). Labelled cDNA was purified using a Qiaquick PCR purification kit (Qiagen). The Cy3-dCTP-labelled sample was mixed with the Cy5-dCTP-labelled sample, vacuum dried and re-suspended in 120 microlitres salt-based hybridisation buffer (supplied with the microarray slides). This was heated at 95 oC for 3 min then cooled on ice for 3 min. The mixture was pipetted onto a microarray slide, sealed with a GeneFrame and coverslip in a hybridization chamber and incubated for 18 h at 42 °C. Following hybridization, microarray slides (minus GeneFrame and coverslip) were washed in a series of pre-warmed (37 °C) SSC buffers for 5 min each at 37oC: 2à SSC/0.1 % SDS, 1à SSC, 0.2à SSC and 0.01à SSC. Microarray slides were dried by centrifugation at 1500 à g for 2 min before scanning. Slides were scanned on an Affymetrix 428 scanner. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). Spots automatically flagged as bad, negative or poor in the Imagene software were removed before the statistical analysis was carried out in GeneSight. The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values. Biological experiments (i.e. a comparison of control and plus CO-RM cells) were carried out four times, and a dye swap performed for each experiment, providing two technical repeats for each of the four biological repeats. Data from the independent experiments were combined. Genes that were differentially expressed ⥠twofold and displayed and P value of < 0.05 (as determined by a t test) were defined as being statistically significantly differentially transcribed.
2010-06-24 | E-GEOD-12878 | biostudies-arrayexpress
Project description:Three tolerant and three sensitive genotypes of the inbred QTL mapping population Family 331 were exposed to either ambient air or an acute ozone exposure of 200 ppb for 9 hrs and ozone response was profiled for each genotype by hybridising control against ozone-exposed samples per genotype. Keywords: stress response, genotype comparrison, ozone exposure Three replicates were grown per genotypes used and RNA was extracted from the fifth leaf below the first fully unfurled leaf. After RNA extraction, equal quantities of RNA from each replicate of a genotype per treatment were pooled to provide a single pool per treatment per genotype. Control and ozone-exposed sample per genotype were then hybridised. Hald of all arrays were hybridised with the control sample in the Cy3 channel and half with control in the Cy5 channel.
2010-06-20 | E-GEOD-10873 | biostudies-arrayexpress
Project description:To determine the transcriptional response to Salmonella enterica serovar Enteritidis (SE) infection, a newly developed chicken 44K Agilent array was used to analyze total RNA of heterophils from SE-resistant (line A) and SEâsusceptible chickens (line B), treated with in vitro infection of SE (I) or non SE medium (N) for 1 hr. A dual-color balanced design was used to provide a direct comparison between SE-infected and non-infected groups (AI/AN, BI/BN) and between line A and line B (AN/BN, AI/BI). Data retrieved from 426 immunologically important genes were used for functional analysis. The results indicated that: In the comparisons of SE infection with non-infection, 39 genes were found differentially expressed (P < 0.05 with at least 2-fold) after Salmonella infection, while 21 genes were found differentially expressed between different lineages. Numerous of members in Toll-like receptor (TLR) signaling pathway were identified which include receptors: MD-2, TLR-4, -5, -15; adaptors: TLR adaptor molecule1 (TICAM1/TRIF), MAP kinase kinase 3 (MKK3) and NFkB-1, as well as cytokines, chemokines and costimulatory molecule: interleukin (IL)-1β, IL-6, IL-8, IL-12, chemokine (C-X-C motif) ligand 1, chemokine (C-C motif) ligand 4, CCL 5, and CD80. Most of immune genes were up-regulated after SE infection, and the magnitude of up-regulation was higher in line A than line B in general. The results suggested that a similar TLR regulatory network exists in both lines with strong response in resistant line. This finding has laid the foundation for further study of molecular and cellular modulation of SE infection in chickens. Keywords: disease state analysis A dual color, balanced design was carried on for all of heterophils samples from sixteen chickens. Each sample type (AI, AN, BI and BN) includes four biological replication for labeling. A Dye swap was used in each pair of comparisons including AI/AN, BI/BN, and AI/BI, and AN/BN. Background subtracted signal intensity were collected from 16 arrays and normalized for data analysis.
2010-06-20 | E-GEOD-9416 | biostudies-arrayexpress
Project description:Glycolysis is the sole free-energy source for the deadly parasite Trypanosoma brucei and is therefore a possible target pathway for anti-trypanosomal drugs. Plasma-membrane glucose transport exerts high control over trypanosome glycolysis and hence the transporter is a promising drug target. Here we show that at high inhibitor concentrations, inhibition of trypanosome glucose transport causes cell death. Most interestingly, sublethal concentrations initiate a domino effect in which network adaptations enhance inhibition. total of 5 slides, including 3 biological replicates and dyeswap
2010-10-18 | E-GEOD-24275 | biostudies-arrayexpress
Project description:The species Campylobacter jejuni is naturally competent for DNA uptake; nevertheless, nonnaturally transformable strains do exist. For a subset of strains we previously showed that a periplasmic DNase, encoded by dns, inhibits natural transformation in C. jejuni. In the present study, genetic factors coding for DNase activity in absence of dns were identified. DNA arrays indicated that nonnaturally transformable dns-negative strains contain putative DNA/RNA non-specific endonucleases encoded by CJE0566 and CJE1441 of strain RM1221. These genes are located on C. jejuni integrated element 2 and 4. Expression of CJE0566 and CJE1441 from strain RM1221 and a homologous gene from strain 07479 in DNase-negative Escherichia coli and C. jejuni strains indicated that these genes code for DNases. Genetic transfer of the genes to a naturally transformable C. jejuni strain resulted in a decreased efficiency of natural transformation. Modelling suggests that the C. jejuni DNases belong to the Serratia nuclease family. Overall, the data indicate that the acquisition of prophage encoded DNA/RNA non-specific endonucleases inhibits the natural transformability of C. jejuni through hydrolysis of DNA. The genomic diversity of 15 naturally competent or nonnaturally transformable Campylobacter jejuni strains were examined by microarray-based comparative genomic indexing (CGI) analysis. The CGI analysis allowed the assessment of CDS content for each C. jejuni strain relative to the C. jejuni DNA microarray, which comprises ORFs from strains NCTC 11168, RM1221. ORFs were spotted in duplicate. Genomic DNA from strains NCTC 11168/RM1221 were used as a reference DNA and competitively hybridized with genomic DNA from each of the other C. jejuni strains. Two replicates for each strain were performed. Data normalization was performed as in Parker et al. J Clin Microbiol 2006, 44(11):4125-4135.
2009-11-13 | E-GEOD-18399 | biostudies-arrayexpress
Project description:Rheumatoid arthritis (RA) and periodontitis (PD) are chronic inflammatory diseases that appear to occur in tandem. Autoantibodies against citrullinated peptide antigens linked pathogeneses with PD preceding RA. However, the mutual impact PD exerts on RA and vice versa has not yet been defined. To address this issue, we set up an animal model and analyzed how the prime inducers of citrullination - Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans – differ in their pathogenic potential. Our experimental setup included collagen induced arthritis (CIA) in the mouse, oral inoculation with P. gingivalis or A. actinomycetemcomitans to induce alveolar bone loss and the combination of both diseases in inverted orders of events. Label-free quantitative proteome analysis revealed that P. gingivalis and A. actinomycetemcomitans led to differential expression patterns in the synovial membranes that were reminiscent of cellular and humoral immune responses, respectively. The P. gingivalis and A. actinomycetemcomitans specific signatures in the synovial proteomes suggest a role for oral pathogens in shaping disease subtypes and setting the stage for subsequent therapy response.
2020-12-04 | PXD020397 | Pride