Effect of FTO (fat mass and obesity-associated) overexpression on gene expression profiling in beta cells
Ontology highlight
ABSTRACT:
ORGANISM(S): Mus musculus
SUBMITTER: Hong-Qi Fan
PROVIDER: E-GEOD-64668 | biostudies-arrayexpress |
REPOSITORIES: biostudies-arrayexpress
Similar Datasets
Project description:To determine the impact of Hnf1a overexpression on gene expression in mouse beta cells, we performed RNA-seq experiments on MIN6 where Hnf1a was overexpressed using CRISPR activation (SAM system).
2022-05-01 | E-MTAB-11474 | biostudies-arrayexpress
Project description:The plant volatile linalool plays important roles in the regulation of defense responses in rice. To clarify the response to linalool in rice at gene expression level, we performed a microarray analysis using the Agilent Rice Oligo Microarray (44k, custom-made; Agilent Technologies, Redwood City, CA, USA). As a result, many defense-related genes including pathogenesis-related (PR) genes were upregulated in the linalool synthase-overexpressing transgenic rice. An Agilent Rice Oligo Microarray (44k, custom-made; Agilent Technologies, Redwood City, CA, USA) was used for the microarray analysis. Total RNA was extracted from leaf blades of four-leaf stage rice plants. Line 13 was used as the linalool synthase-overexpressing transgenic rice plant. For each biological replicate, material from at least three rice plants was pooled to provide a single sample for RNA extraction. We performed 3 biological replicates for each treatment. All microarray procedures and data analyses were performed according to the manufacturerM-bM-^@M-^Ys instructions. RNA integrity was checked using an Agilent 2100 Bioanalyzer (Agilent Technologies, Redwood City, CA, USA). Total RNA (100 ng) was labeled with Cy-3 using an Agilent Low Input Quick Amp Labeling Kit, One-Color (Agilent Technologies). Fluorescently labeled targets were hybridized to Agilent Rice Oligo Microarrays for 17 h at 65M-BM-0C. After hybridization, following wash processes were performed according to the manufacturerM-bM-^@M-^Ys instructions, and hybridized microarrays were scanned using an Agilent Microarray Scanner (G2565CA; Agilent Technologies). Feature extraction software (Agilent Feature Extraction; Agilent Technologies) was used to delineate and measure the signal intensity of each spot in the array, and to normalize intensities. The background was measured around each spot as local background, calculated by the Feature Extraction software. Statistical data extraction processes were performed according to the manufacturerM-bM-^@M-^Ys instructions.
2013-04-01 | E-GEOD-43383 | biostudies-arrayexpress
Project description:This study was designed to explore the role of miRNA-146a (miR-146a) and its target genes in the endothelial cells. In this study we have demonstrated that lipopolysaccharide (LPS) induced upregulation of miR-146a in the human umbilical vein endothelial cells (HUVEC) and the induction was blocked by the silencing of the toll-like receptors (TLRs) adaptor molecules MyD88 and nonspecific NF-M-NM-:B inhibitor BAY 11-7082. In addition, knockdown of miR-146a by transfection of the locked nucleic acid (LNA)-antimiR-146a significantly decreased the increased cell migration and tube formation induced by LPS. A combined analysis of the bioinformatics miRanda algorithms and the whole genome expression microarray of the immunoprecipitated Ago2 ribonucleoprotein complex identified 14 transcripts as the potential target genes. Subsequent transfection with miR-146a precursor pre-miR-146a into the HUVEC validated that the CARD10 was the target gene of the miR-146a both in the transcript and protein level. immunoprecipitation of RNA-induced silencing complexes (RISC) with an Ago2-specific monoclonal antibody followed by RNA extraction and subsequent quantification of mRNAs on microarrays was utilized to identify mRNAs that are associated with the RNA-silencing machinery and are therefore targets of cellular miRNAs. In brief, 100 M-NM-<g of total protein was diluted with 200 M-NM-<L of PBS buffer (pH 7.4). For each sample, 25 M-NM-<L of Protein A/G plus agarose (Santa Cruz, Dallas, TX) was washed with PBS and incubated with 2 M-NM-<g of rabbit anti-Ago2 (Abcam, Cambridge, MA) or rabbit normal IgG (Santa Cruz) antibodies for 2 h at 4M-BM-0C. The beads containing the immobilized anti-Ago2 antibody were then added to 400 M-NM-<L of diluted serum and incubated for 4 h at 4M-BM-0C. The beads were washed 3 times with 1% NT-2 buffer (1% Nonidet P-40, 50 mM Tris-HCl, pH 7.4, 150 mM NaCl, and 2 mM EDTA) and the mixture was split in half. Each sample was eluted in 600 M-NM-<L of lysis/binding buffer for total RNA extraction and subsequent whole genome array experiment. Microarray analyses. Microarray experiments were performed on the total RNA samples from the Ago2 immunoprecipitate (pooling from n=4 in each group) from 1M-CM-^W106 HUVEC with or without 1 M-NM-<g/mL LPS treatment for 24 h in the presence or absence of miR-146a knockdown by LNA-antimiR-146a or LNA-control, respectively. The procedures were carried out following the manufacturerM-bM-^@M-^Ys protocols. Briefly, 0.5 M-NM-<g of total RNA was amplified by a Fluorescent Linear Amplification Kit (Agilent Technologies) and labeled with Cy3-CTP or Cy5-CTP (PerkinElmer, Waltham, MA) during the in vitro transcription process. RNA from the experimental groups and control group was labeled by Cy5 and Cy3, respectively. A total of 0.825 M-NM-<g of Cy-labled cRNA was fragmented to an average size of about 50-100 nucleotides by incubation with fragmentation buffer (Agilent Technologies) at 60oC for 30 minutes. Correspondingly fragmented labeled cRNA is then pooled and hybridized to Agilent Whole Human Genome 4x44k oligo microarray (Agilent Technologies) at 60M-BM-0C for 17 h. After washing and drying by nitrogen gun blowing, microarrays are scanned with an Agilent microarray scanner (Agilent Technologies) at 535 nm for Cy3 and 625 nm for Cy5. Scanned images are analyzed by Feature extraction software 9.5.3 (Agilent Technologies), an image analysis and normalization software is used to quantify signal and background intensity for each feature, substantially normalized the data by rank-consistency-filtering LOWESS method.
2013-09-10 | E-GEOD-50619 | biostudies-arrayexpress
Project description:The goal of this study is to investigate the differential transcripted genes affected by CRISPR induced endoglin knockout in PASMC cells. Total RNA was purified from NTC or ENG-/- PASMC cells using RNeasy Mini Kit (Qiagen, Hilden, Germany). RNA quality and concentration were assessed with Agilent Tapestation 200 (Agilent Technologies) and Qubit 2.0 (ThermoFisher Scientific). ~250-500 ng RNA were used for library construction. The NGS libraries were constructed using the KAPA Stranded mRNA-Seq Kits (KapaBioSystems). mRNA was captured using magnetic oligo-dT beads and 1st strand cDNA was synthesized using random priming. In order to preserve strand-specificity, 2nd strand synthesis, which converts the cDNA:RNA hybrid to double-stranded cDNA (dscDNA), was marked by dUTP incorporation. cDNA framents were A-tailed by adding dAMP to the 3'-ends of the dscDNA library fragments. dsDNA Illumina TruSeq "forkedâ adapters 3'-dTMP overhangs were then ligated to A-tailed library insert fragments. Each of the six libraries were ligated with a unique Truseq 6bp barcode. Library fragments were amplified using the KAPA HiFi HotStart polymerase. The strand marked with dUTP was not amplified, allowing strand-specific sequencing. Fragment length and library quality was assessed on a 2100 Bioanalyzer using the High Sensitivity DNA Kit (Agilent Technologies). Libraries were diluted to 10nM and pooled at equimolar ratios. The pool was then diluted to 2nM and denatured in NaOH following Illumina recommendations. 10pM of denatured library pool was loaded in one HiSeq lane and flowcell was clustered on the Illumina C-bot. 5% PhiX control was spiked-in. The flowcell was sequenced on a HiSeq 2500 V4 chemistry with 50bp Single read protocol. Data was demultiplexed and Fastq files were generated using BcptoFastq 1.8.4 script provided by Illumina.
2017-05-16 | E-GEOD-78271 | biostudies-arrayexpress
Project description:MyD88 is an important adaptor protein for signal transduction downstream of Toll-like receptors and TACI, receptors for regulation of innate immunity and B cell responses, respectively. The surfaces of oral mucosa are protected from infections by antimicrobial proteins and natural immunoglobulins that are constantly secreted in saliva, serving as principal innate immune defense in the oral cavity. Although MyD88-mediated signaling has a regulatory role in the intestinal mucosal immunity, its specific role in the oral cavity has been remained elusive. To identify the specific roles of MyD88-dependent signaling in gene expression profiles in salivary glands, we performed microarray analysis of the major salivary gland tissues (submandibular gland plus sublingual gland) from control (wild-type C57BL/6) mice and C57BL/6 background Myd88-null mice using Agilent Whole Mouse Genome Oligo Microarrays (8x60K, Design ID 028005). Total RNA was extracted from the major salivary gland tissues (submandibular gland plus sublingual gland) of wild-type and Myd88-null mice using using Trizol reagent (Life Technologies, Rockville, MD, USA) according to the manufacturer's instructions. 100 ng of all RNA samples was used as template to produce Cy3-labeled cRNA. The RNA samples were amplified and labeled using the Low Input Quick Amp Labeling Kit (Agilent Technologies, Palo Alto, USA) following the manufacturerM-bM-^@M-^Ys protocol. Cy3 labeled cRNAs were hybridized overnight (17 hours, 65M-BM-0C) to an Agilent Whole Mouse Genome Oligo Microarrays (8x60K, Design ID 028005) using AgilentM-bM-^@M-^Ys recommended hybridization chamber and oven.Finally, microarrays were washed once with wash buffer 1 for 1 min at RT followed by a second wash with wash buffer 2 for 1 min at 37M-BM-0C and a final wash step with acetonitrile for 30 sec at RT. Fluorescence signals of the hybridized Agilent Microarrays were detected using AgilentM-bM-^@M-^Ys Microarray Scanner System (G2505C, Agilent Technologies). The Agilent Feature Extraction Software (FES 10.7.3.1 ) was used to read out and process the microarray image files.
2014-09-19 | E-GEOD-61339 | biostudies-arrayexpress
Project description:The HIV-1 Trans-Activator of Transcription (Tat) protein binds to multiple host cellular factors and greatly enhances the level of transcription of the HIV genome. Here, we report the genome-wide binding map of Tat to the human genome in Jurkat T cells (Jurkat-Tat cells) using chromatin immunoprecipitation combined with next-generation sequencing. cDNA microarray was used to monitor gene expression changes between Jurkat and Jurkat-Tat cells. Additionally, we compared distribution of H3K9ac near gene promoters between Jurkat and Jurkat-Tat cells using ChIP-chip method and hybridized onto Agilent promoter array. Our data reveal that TatM-CM-"M-BM-^@M-BM-^Ys interaction with the host genome is more extensive than previously thought, with potentially important implications for the viral life cycle. Expression profiles on Jurkat-Tat cells versus Jurkat cells. ChIP on chip for H3K9ac in Jurkat-Tat versus Jurkat cells. ChIP-seq for HIV-1 Tat protein in Jurkat-Tat cells.
2011-11-06 | E-GEOD-30738 | biostudies-arrayexpress
Project description:Purpose: Compare the transcriptional profile of staurosporine-treated cells in Neurospora crassa wild type cells grown with different availabilities of calcium. Methods: Conidial suspensions were obtained and 1 x 106 cells/ml incubated in minimal medium (with the indicated concentrations of calcium) for 6 hours (26M-BM-:C, 140 rpm, constant light) followed by the addition of staurosporine (or DMSO) and growth for 1 more hour. For the experiments in 0 Ca2+ or 20 mM CaCl2 media, the concentration of KH2PO4 in the 50x VogelM-bM-^@M-^Ys stock solution was limited to 10 mM to avoid precipitation with supplemental calcium. Cells were harvested using 0.45 M-NM-<m filters and immediately frozen in liquid nitrogen. Total RNA was isolated by the Trizol-Phenol-Chloroform method. After digestion of 25 M-NM-<g RNA with TURBO DNAse (Life Technologies), mRNA was purified using Dynabeads oligo(dT) magnetic beads (Life Technologies). The mRNA was chemically fragmented using the Ambion RNA fragmentation kit (Life Technologies). First and second strand cDNA synthesis was achieved using appropriate kits (Life Technologies). The illumina TruSeq kit was employed to generate the cDNA libraries with indexing adapters essentially following the manufacturerM-bM-^@M-^Ys protocol. After purification of the libraries with AMPure XP beads (Roche), the quality of the libraries was analyzed in a Agilent 2100 Bioanalyzer. The cDNA libraries were sequenced in a illumina HiSeq2000 and single reads of 50 bp were obtained. Sequencing data was handled essentially with Tophat, Cufflinks and Cuffdiff. Expression levels are presented as Fragments Per Kilobase of transcript per Million mapped reads (FPKM). Results: Differences in the concentration of extracellularly available Ca2+ result in distinct transcriptional programs. Conclusions: Our transcriptomic analysis provides a reference dataset for future investigations on the role of Ca2+ in fungal biology. Transcriptional profile of staurosporine-treated Neurospora crassa wild type cells growing with different concentrations of calcium was compared using illumina HiSeq2000 and single reads of 50 bp.
2014-12-05 | E-GEOD-53013 | biostudies-arrayexpress
Project description:MicroRNAs (miRNAs) are known to be deregulated in human breast cancer (BC). The purpose of the current study was to investigate the expression of miRNAs in different stages of BC to assess their biological value in BC progression. MiRNA expression was assessed in a series of BC patients (n=7) with distinct stages of tumour progression (Normal, in-situ (DCIS), primary invasive BC and nodal metastases) to evaluate miRNA differential expression. We used an Agilent miRNA microarray based platform which uses miRBase 16 to screen for 1205 Homo sapiens (hsa) and 144 human viral miRNA candidates. To validate the microarray data, the expression of two deregulated miRNAs was measured by TaqMan quantitative real-time reverse transcription polymerase chain reaction (qRT-PCR). This study was conducted Formalin Fixed and Paraffin Embedded (FFPE) specimens from 7 female patients. Twenty M-NM-<m thick FFPE sections were cut and mounted on PALM Membrane Slides. Under direct microscopic visualization, tissues of interest were micro-dissected using PALM non-contact Laser catapulsion instrument (P.A.L.M. Microlaser Technologies, Carl Zeiss Ltd). Total RNA, including miRNAs, was extracted with the TRIzol reagent (Invitrogen, supplied by Fisher Scientific UK Ltd) according to the manufacturerM-bM-^@M-^Ys instructions. Total RNA was quantified with Quant-iT RiboGreen RNA Quantitation Kit (Fisher Scientific UK Ltd), which is an accurate method of measuring total RNA with a detection limit of 0.001-1ng/M-BM-5l. RNA purity and RNA integrity number (RIN) were determined on an Agilent 2100 Bioanalyzer and RNA 6000 NanoLabChip Kits (both Agilent Technologies, Santa Clara, USA), and the RIN of all the samples was >2 but <3. This is expected for FFPE breast samples and is acceptable by Agilent Technologies, Santa Clara, USA, for FFPE samples to undergo miRNA microarray analysis. MiRNAs extracted from laser microdissected tissue components were profiled using Agilent microRNA microarray profiling system (Agilent Technologies, Santa Clara, USA). Total RNA samples were spiked using the MicroRNA Spike-In Kit (Agilent Technologies, Santa Clara, USA) to evaluate efficiencies of labelling and hybridisation. Total RNA was treated with Calf Intestinal Alkaline Phosphatase (CIP), and then 100 ng of total RNA was used per sample to initiate a labelling reaction. Ligation master mix for T4 RNA ligase, which includes Cyanine 3-Cytidine biphosphate (Cyanine 3-pCp) (Complete miRNA Labelling and Hyb Kit, Agilent Technologies, Santa Clara, USA) was used to label the dephosphorylated RNA. Cyanine-3-labelled miRNA samples were hybridised to human miRNA microarrays (Release 16.0, 8x60K) (Agilent Technologies, Santa Clara, USA) at 55M-BM-0C for 20 hrs. Microarray slides were washed with increasing stringency (Gene Expression Wash Buffers, Agilent Technologies, Santa Clara), and subsequently dried with acetonitrile (Sigma-Aldrich, St. Louis, USA). Fluorescent signal intensities were detected on an Agilent Microarray Scanner (Agilent Technologies, Santa Clara, USA) using the Scan Control A.8.4.1 Software (Agilent Technologies, Santa Clara, USA) and extracted from the images with the Feature Extraction 10.7.3.1 Software (Agilent Technologies, Santa Clara, USA).
2012-06-22 | E-GEOD-38867 | biostudies-arrayexpress
Project description:In this study, time dependent (4 h to 96 h) transcriptome changes in roots and shoots of Brassica juncea were analyzed under arsenate (AsV) stress by using Agilent platform. A total of 1285 genes showed significant change in expression pattern upon arsenate (AsV) exposure. The genes belonged to various signaling pathways including hormones (jasmonate, abscisic acid (ABA), auxin and ethylene) and kinases. Significant effects were also noticed on genes of sulfur, nitrogen, CHO, and lipid metabolisms along with photosynthesis. These studies indicated interconnections among sulfur metabolism, jasmonate and kinase signaling pathways. Transcriptome results and biochemical analyses highlight that signaling and metabolic pathways work in a dynamic coordination to perceive and respond to the stress. A set of 53939 sequences, which include EST and nucleotide sequences of Brassica sp., were downloaded from GenBank. These sequences were subjected to clustering and analyzed using CAP3/tgicl program and other in-house tools. A set of 26881 non-redundant sequences was created, which was used for probe design. This set included 1720 Brassica juncea, 15259 Brassica napus and 5075 Brassica rapa sequences; and 6456 from other species. Probes were designed for the non-redundant sequences using Agilent eArray tool. Best probe composition algorithm with the option to design multiple probes for each sequence was the main criteria used for the probe design. AgilentM-bM-^@M-^Ys 4x44 array was selected to print the oligos. A set of positive and negative controls were also added on to the microarray chip. A set of replicate probes were also added for calculating the intra-array reproducibility. The quantity and purity of the RNA was determined by absorbance at 260 nm and 260/280 absorbance ratio respectively. Each of the total RNA preparations was individually assessed for RNA quality based on the 28S/18S ratio and RIN measured on an Agilent 2100 Bioanalyzer system using the RNA 6000 Nano LabChip Kit .With the use of AgilentM-bM-^@M-^Ys 1-Color Quick Amp Labeling Kit, 500 ng of high quality total RNA was denatured in the presence of a T7 promoter primer and a 1-Color RNA Spike-In Kit. Reverse transcriptase was used to reverse-transcribe the mRNA. cDNA was used as a template for in vitro transcription where a T7 RNA polymerase simultaneously amplified target material and incorporated cyanine 3-labeled CTP. Labeled cRNA was purified using spin columns from the Qiagen RNeasy Mini Kit and the quantity and quality of the cRNA was determined by Nanodrop ND-1000 UV-VIS spectrophotometer. With the use of AgilentM-bM-^@M-^Ys Gene Expression Hybridization Kit, 1.65 M-BM-5g of cyanine 3-labeled linearly amplified cRNA was added to a hybridization cocktail and then fragmented. The hybridization cocktail was then dispensed into the wells of gasket slides on top of which a Brassica 4x44K Gene Expression Microarray was placed. This microarray M-bM-^@M-^\sandwichM-bM-^@M-^] was then sealed in a hybridization chamber. The microarrays were hybridized at 65M-BM-0C rotating at 10 RPMs for 17 hours. Slides were washed in AgilentM-bM-^@M-^Ys Gene Expression Wash Buffers according to manufacturer specifications. The microarrays were scanned on the Agilent Microarray Scanner. Scanner data extraction and analysis was performed using Agilent Technologies Feature Extraction software version 10.7.3.1.Microarray data quality was evaluated by reviewing ten standard QC metrics generated by the Feature Extraction Software [Consult the Agilent Technologies Feature Extraction Software version 10.7.3.1 reference guide for a full explanation of the QC metrics]. To determine if there was a large hybridization, staining, or wash artifacts, a visual examination of each array was performed by loading the array image into Feature Extraction Software. Microarrays were determined to be free of any large artifacts (M-bM-^IM-% 10% of total surface area) that could have affected the quality of the data.
2015-03-04 | E-GEOD-66464 | biostudies-arrayexpress
Project description:Gene expression of peripheral regions and central regions from HT-29 tumors Sample tissues were immediately frozen by liquid nitrogen after isolation. Total RNAs were extracted from samples with a PureLink RNA Mini Kit (Life Technologies). The integrity of total RNAs was evaluated using an Agilent 2100 Bioanalyzer (Agilent Technologies, Santa Clara, CA, USA). Low Input Quick Amp Labeling Kit, one-color (Agilent Technologies) was used to prepare Cy3-labelled target cRNA according to the manufacturer's instructions. Labeled cRNAs were hybridized with a SurePrint G3 Human GE 8M-CM-^W60K Microarrays (Agilent Technologies). Three separate hybridizations were performed for each sample. Array images were captured using a DNA Microarray Scanner (Agilent Technologies), and data were analyzed using Feature Extraction Software (Agilent Technologies) to obtain background-corrected signal intensities. Data were further analyzed with GeneSpring GX Software (Version 11.0, Agilent Technologies). After data filtering, mRNAs differentially expressed in target cells versus controls were assessed by FisherM-bM-^@M-^Ys exact test, followed by multiple corrections using the Benjamini and Hochberg false discovery rate (FDR) method. Gene sets with a FDR q-value < 0.05 were considered to be significant.
2015-01-10 | E-GEOD-64831 | biostudies-arrayexpress