Dataset Information

Improved Aerosolization Stability of Inhalable Tobramycin Powder Formulation by Co-Spray Drying with Colistin.

ABSTRACT:

Purpose

Tobramycin shows synergistic antibacterial activity with colistin and can reduce the toxic effects of colistin. The purpose of this study is to prepare pulmonary powder formulations containing both colistin and tobramycin and to assess their in vitro aerosol performance and storage stability.

Methods

The dry powder formulations were manufactured using a lab-scale spray dryer. In vitro aerosol performance was measured using a Next Generation Impactor. The storage stability of the dry powder formulations was measured at 22°C and two relative humidity levels - 20 and 55%. Colistin composition on the particle surface was measured using X-ray photoelectron spectroscopy.

Results

Two combination formulations, with 1:1 and 1:5 molar ratios of colistin and tobramycin, showed fine particle fractions (FPF) of 85%, which was significantly higher than that of the spray dried tobramycin (45%). FPF of the tobramycin formulation increased significantly when stored for four weeks at both 20% and 55% RH. In contrast, FPF values of both combination formulations and spray dried colistin remained stable at both humidity levels. Particle surface of each combination was significantly enriched in colistin molecules; 1:5 combination showed 77% by wt. colistin.

Conclusions

The superior aerosol performance and aerosolization stability of 1:1 and 1:5 combination formulations of colistin and tobramycin could be attributed to enrichment of colistin on the co-spray dried particle surface. The observed powder properties may be the result of a surfactant-like assembly of these colistin molecules during spray drying, thus forming a hydrophobic particle surface.

SUBMITTER: Pathak V

PROVIDER: S-EPMC10019100 | biostudies-literature | 2022 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Improved Aerosolization Stability of Inhalable Tobramycin Powder Formulation by Co-Spray Drying with Colistin.

Pathak Vaibhav V Park Heejun H Zemlyanov Dmitry D Bhujbal Sonal V SV Ahmed Maizbha Uddin MU Azad Mohammad A K MAK Li Jian J Zhou Qi Tony QT

Pharmaceutical research 20220802 11

<h4>Purpose</h4>Tobramycin shows synergistic antibacterial activity with colistin and can reduce the toxic effects of colistin. The purpose of this study is to prepare pulmonary powder formulations containing both colistin and tobramycin and to assess their in vitro aerosol performance and storage stability.<h4>Methods</h4>The dry powder formulations were manufactured using a lab-scale spray dryer. In vitro aerosol performance was measured using a Next Generation Impactor. The storage stability ...[more]

PMID: 35915320

Similar Datasets

Project description:SARS-CoV-2, the causative agent of COVID-19, predominantly affects the respiratory tract. As a consequence, it seems intuitive to develop antiviral agents capable of targeting the virus right on its main anatomical site of replication. Ivermectin, a U.S. FDA-approved anti-parasitic drug, was originally shown to inhibit SARS-CoV-2 replication in vitro, albeit at relatively high concentrations, which is difficult to achieve in the lung. In this study, we tested the spray-drying conditions to develop an inhalable dry powder formulation that could ensure sufficient antiviral drug concentrations, which are difficult to achieve in the lungs based on the oral dosage used in clinical trials. Here, by using ivermectin as a proof-of-concept, we evaluated spray-drying conditions that could lead to the development of antivirals in an inhalable dry powder formulation, which could then be used to ensure sufficient drug concentrations in the lung. Thus, we used ivermectin in proof-of-principle experiments to evaluate our system, including physical characterization and in vitro aerosolization of prepared dry powder. The ivermectin dry powder was prepared with a mini spray-dryer (Buchi B-290), using a 23 factorial design and manipulating spray-drying conditions such as feed concentration (0.2% w/v and 0.8% w/v), inlet temperature (80 °C and 100 °C) and presence/absence of L-leucine (0% and 10%). The prepared dry powder was in the size range of 1-5 μm and amorphous in nature with wrinkle morphology. We observed a higher fine particle fraction (82.5 ± 1.4%) in high feed concentration (0.8% w/v), high inlet temperature (100 °C) and the presence of L-leucine (10% w/w). The stability study conducted for 28 days confirmed that the spray-dried powder was stable at 25 ± 2 °C/<15% RH and 25 ± 2 °C/ 53% RH. Interestingly, the ivermectin dry powder formulation inhibited SARS-CoV-2 replication in vitro with a potency similar to ivermectin solution (EC50 values of 15.8 µM and 14.1 µM, respectively), with a comparable cell toxicity profile in Calu-3 cells. In summary, we were able to manipulate the spray-drying conditions to develop an effective ivermectin inhalable dry powder. Ongoing studies based on this system will allow the development of novel formulations based on single or combinations of drugs that could be used to inhibit SARS-CoV-2 replication in the respiratory tract.

Project description:Soluplus is a polymer that has been explored to prepare nanocomposites for pulmonary drug delivery and is non-toxic. However, its aerosolization attributes when spray-dried have not been investigated. Hence, this work aimed to investigate the aerosol performance of soluplus-based spray-dried powders. In addition, the potential use of leucine to improve the aerosolization of such particles was also investigated by including leucine at 10 or 20% w/w. 4% w/w salbutamol was used as a model drug in all the formulations primarily to aid quantification during aerosolization evaluation and for assessing the interaction between the drug and soluplus using infrared spectroscopy with the multivariate analysis approach of principal component analysis (PCA). Three formulations (4% salbutamol/96% soluplus, 4% salbutamol/86% soluplus/10% leucine, 4% salbutamol/76% soluplus/20% leucine) were prepared. The formulations were characterized in terms of solid-state, water content, particle size/morphology, and aerosolization. Similarly, two additional formulations (14% salbutamol/86% soluplus and 24% salbutamol/76% soluplus) were prepared to assess potential non-covalent interactions between salbutamol and soluplus. The formulations with only salbutamol and soluplus were amorphous, as evident from X-ray diffraction. Leucine was crystalline in the formulations. All the spray-dried formulations were irregular spheres with surface corrugation. The 96% soluplus powder showed an emitted fraction (EF) and fine particles fraction (FPF) of 91.9 and 49.8%, respectively. The inclusion of leucine at 10% did not increase the EF; however, an increase in FPF (69.7%) was achieved with 20% leucine. PCA of the infrared spectra suggested potential non-covalent interactions between salbutamol and soluplus. It hinted at the potential involvement of ketone groups of the excipient. This study concludes that soluplus-based spray-dried powder with or without leucine can potentially be utilized for pulmonary drug delivery. In addition, PCA can effectively be utilized in assessing interactions and overcoming limitations associated with visual assessment of the spectra of such formulations.

Project description:While all the siRNA drugs on the market target the liver, the lungs offer a variety of currently undruggable targets which could potentially be treated with RNA therapeutics. Hence, local, pulmonary delivery of RNA nanoparticles could finally enable delivery beyond the liver. The administration of RNA drugs via dry powder inhalers offers many advantages related to physical, chemical and microbial stability of RNA and nanosuspensions. The present study was therefore designed to test the feasibility of engineering spray dried lipid nanoparticle (LNP) powders. Spray drying was performed using 5% lactose solution (m/V), and the targets were set to obtain nanoparticle sizes after redispersion of spray-dried powders around 150 nm, a residual moisture level below 5%, and RNA loss below 15% at maintained RNA bioactivity. The LNPs consisted of an ionizable cationic lipid which is a sulfur-containing analog of DLin-MC3-DMA, a helper lipid, cholesterol, and PEG-DMG encapsulating siRNA. Prior to the spray drying, the latter process was simulated with a novel dual emission fluorescence spectroscopy method to preselect the highest possible drying temperature and excipient solution maintaining LNP integrity and stability. Through characterization of physicochemical and aerodynamic properties of the spray dried powders, administration criteria for delivery to the lower respiratory tract were fulfilled. Spray dried LNPs penetrated the lung mucus layer and maintained bioactivity for >90% protein downregulation with a confirmed safety profile in a lung adenocarcinoma cell line. Additionally, the spray dried LNPs successfully achieved up to 50% gene silencing of the house keeping gene GAPDH in ex vivo human precision-cut lung slices at without increasing cytokine levels. This study verifies the successful spray drying procedure of LNP-siRNA systems maintaining their integrity and mediating strong gene silencing efficiency on mRNA and protein levels both in vitro and ex vivo. The successful spray drying procedure of LNP-siRNA formulations in 5% lactose solution creates a novel siRNA-based therapy option to target respiratory diseases such as lung cancer, asthma, COPD, cystic fibrosis and viral infections.

Dataset Information

Improved Aerosolization Stability of Inhalable Tobramycin Powder Formulation by Co-Spray Drying with Colistin.

Purpose

Methods

Results

Conclusions

Publications

Improved Aerosolization Stability of Inhalable Tobramycin Powder Formulation by Co-Spray Drying with Colistin.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets