Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Progress and Perspective of Glass-Ceramic Solid-State Electrolytes for Lithium Batteries.

ABSTRACT: The all-solid-state lithium battery (ASSLIB) is one of the key points of future lithium battery technology development. Because solid-state electrolytes (SSEs) have higher safety performance than liquid electrolytes, and they can promote the application of Li-metal anodes to endow batteries with higher energy density. Glass-ceramic SSEs with excellent ionic conductivity and mechanical strength are one of the main focuses of SSE research. In this review paper, we discuss recent advances in the synthesis and characterization of glass-ceramic SSEs. Additionally, some discussions on the interface problems commonly found in glass-ceramic SSEs and their solutions are provided. At the end of this review, some drawbacks of glass-ceramic SSEs are summarized, and future development directions are prospected. We hope that this review paper can help the development of glass-ceramic solid-state electrolytes.

SUBMITTER: Lin L

PROVIDER: S-EPMC10096416 | biostudies-literature | 2023 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Progress and Perspective of Glass-Ceramic Solid-State Electrolytes for Lithium Batteries.

Lin Liyang L Guo Wei W Li Mengjun M Qing Juan J Cai Chuang C Yi Ping P Deng Qibo Q Chen Wei W

Materials (Basel, Switzerland) 20230327 7

The all-solid-state lithium battery (ASSLIB) is one of the key points of future lithium battery technology development. Because solid-state electrolytes (SSEs) have higher safety performance than liquid electrolytes, and they can promote the application of Li-metal anodes to endow batteries with higher energy density. Glass-ceramic SSEs with excellent ionic conductivity and mechanical strength are one of the main focuses of SSE research. In this review paper, we discuss recent advances in the sy ...[more]

PMID: 37048952

Similar Datasets

Dense PVDF-type polymer-in-ceramic electrolytes for solid state lithium batteries.

Project description:Li7La3Zr1.4Ta0.6O12 (LLZTO) and polyvinylidene fluoride (PVDF) composite electrolytes (LPCEs) with a high ceramic content up to 80 wt% have been developed. Hot pressing can significantly reduce the porosity of LPCEs and increase the conductivity to 1.08 × 10-4 S cm-1 at 60 °C, then the LPCEs can sustain Li plating/stripping cycling for over 1500 h, and make LiFePO4/LPCE/Li cell display a capacity retention of 86% in 200 cycles.

| S-EPMC9054578 | biostudies-literature

Investigation of Glass-Ceramic Lithium Thiophosphate Solid Electrolytes Using NMR and Neutron Scattering.

Project description:Solid-state Li batteries require solid electrolytes which have high Li+ conductivity and good chemical/mechanical compatibility with Li metal anodes and high energy cathodes. Structure/function correlations which relate local bonding to macroscopic properties are needed to guide development of new solid electrolyte materials. This study combines diffraction measurements with solid-state nuclear magnetic resonance spectroscopy (ssNMR) and neutron pair distribution function (nPDF) analysis to probe the short-range vs. long-range structure of glass-ceramic Li3PS4-based solid electrolytes. This work demonstrates how different synthesis conditions (e.g., solvent selection and thermal processing) affect the resulting polyanionic network. More specifically, structures with high P coordination numbers (e.g., PS43- and P2S74-) correlate with higher Li+ mobility compared to other polyanions (e.g., (PS3)nn- chains and P2S64-). Overall, this work demonstrates how ssNMR and nPDF can be used to draw key structure/function correlations for solid-state superionic conductors.

| S-EPMC9004633 | biostudies-literature

Solid-state polymer electrolytes for high-performance lithium metal batteries.

Project description:Electrochemical cells based on alkali metal anodes are receiving intensive scientific interest as potentially transformative technology platforms for electrical energy storage. Chemical, morphological, mechanical and hydrodynamic instabilities at the metal anode produce uneven metal electrodeposition and poor anode reversibility, which, are among the many known challenges that limit progress. Here, we report that solid-state electrolytes based on crosslinked polymer networks can address all of these challenges in cells based on lithium metal anodes. By means of transport and electrochemical analyses, we show that manipulating thermodynamic interactions between polymer segments covalently anchored in the network and "free" segments belonging to an oligomeric electrolyte hosted in the network pores, one can facilely create hybrid electrolytes that simultaneously exhibit liquid-like barriers to ion transport and solid-like resistance to morphological and hydrodynamic instability.

| S-EPMC6765010 | biostudies-literature

Designing the Interface Layer of Solid Electrolytes for All-Solid-State Lithium Batteries.

Project description:Li1.3Al0.3Ti1.7(PO4)3 (LATP) is one of the most attractive solid-state electrolytes (SSEs) for application in all-solid-state lithium batteries (ASSLBs) due to its advantages of high ionic conductivity, air stability and low cost. However, the poor interfacial contact and slow Li-ion migration have greatly limited its practical application. Herein, a composite ion-conducting layer is designed at the Li/LATP interface, which a MoS2 film is constructed on LATP via chemical vapor deposition, followed by the introduction of a solid polymer (SP) liquid precursor to form a MoS2@SP protective layer. This protective layer not only achieves a lower Li-ion migration energy barrier, but also adsorbs more Li-ion, which is able to promote interfacial ion transport and improve interfacial contacts. Thanks to the improved migration and adsorption of Li-ion, the Li symmetric cell containing LATP-MoS2@SP exhibits a stable cycle of more than 1200 h at 0.1 mA cm-2. More remarkably, the capacity retention of the full cell assembled with LiFePO4 cathode is as high as 86.2% after 400 cycles at 1 C. This work provides a design strategy for significantly improving unstable interfaces of SSEs and realizing high-performance ASSLBs.

| S-EPMC11304316 | biostudies-literature

All-Solid-State Lithium-Ion Batteries with Oxide/Sulfide Composite Electrolytes.

Project description:Li6.3La3Zr1.65W0.35O12 (LLZO)-Li6PS5Cl (LPSC) composite electrolytes and all-solid-state cells containing LLZO-LPSC were fabricated by cold pressing at room temperature. The LPSC:LLZO ratio was varied, and the microstructure, ionic conductivity, and electrochemical performance of the corresponding composite electrolytes were investigated; the ionic conductivity of the composite electrolytes was three or four orders of magnitude higher than that of LLZO. The high conductivity of the composite electrolytes was attributed to the enhanced relative density and the rule of mixture for soft LPSC particles with high lithium-ion conductivity (~10-4 S·cm-1). The specific capacities of all-solid-state cells (ASSCs) consisting of a LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode and the composite electrolytes of LLZO:LPSC = 7:3 and 6:4 were 163 and 167 mAh·g-1, respectively, at 0.1 C and room temperature. Moreover, the charge-discharge curves of the ASSCs with the composite electrolytes revealed that a good interfacial contact was successfully formed between the NCM811 cathode and the LLZO-LPSC composite electrolyte.

| S-EPMC8073507 | biostudies-literature

2D MXene-containing polymer electrolytes for all-solid-state lithium metal batteries.

Project description:Nanocomposite polymer electrolytes (CPEs) are promising materials for all-solid-state lithium metal batteries (LMBs) due to their enhanced ionic conductivities and stability to the lithium anode. MXenes are a new two-dimensional, 2D, family of early transition metal carbides and nitrides, which have a high aspect ratio and a hydrophilic surface. Herein, using a green, facile aqueous solution blending method, we uniformly dispersed small amounts of Ti3C2T x into a poly(ethylene oxide)/LiTFSI complex (PEO20-LiTFSI) to fabricate MXene-based CPEs (MCPEs). The addition of the 2D flakes to PEO simultaneously retards PEO crystallization and enhances its segmental motion. Compared to the 0D and 1D nanofillers, MXenes show higher efficiency in ionic conductivity enhancement and improvement in the performance of LMBs. The CPE with 3.6 wt% MXene shows the highest ionic conductivity at room temperature (2.2 × 10-5 S m-1 at 28 °C). An LMB using MCPE with only 1.5 wt% MXene shows rate capability and stability comparable with that of the state-of-the-art CPELMBs. We attribute the excellent performance to the 2D geometry of the filler, the good dispersion of the flakes in the polymer matrix, and the functional group-rich surface.

| S-EPMC9473207 | biostudies-literature

Liquid-Phase Approach to Glass-Microfiber-Reinforced Sulfide Solid Electrolytes for All-Solid-State Batteries.

Project description:Deformable, fast-ion conducting sulfides enable the construction of bulk-type solid-state batteries that can compete with current Li-ion batteries in terms of energy density and scalability. One approach to optimizing the energy density of these cells is to minimize the size of the electrolyte layer by integrating the solid electrolyte in thin membranes. However, additive-free thin membranes, as well as many membranes based on preprepared scaffolds, are difficult to prepare or integrate in solid cells on a large scale. Here, we propose a scalable solution-based approach to produce bulk-type glass-microfiber-reinforced composites that restore the deformability of sulfide electrolytes and can easily be shaped into thin membranes by cold pressing. This approach supports both the ease of preparation and enhancement of the energy density of sulfide-based solid-state batteries.

| S-EPMC10401568 | biostudies-literature

Metal-Organic Framework Glass as a Functional Filler Enables Enhanced Performance of Solid-State Polymer Electrolytes for Lithium Metal Batteries.

Project description:Polymers are promising candidates as solid-state electrolytes due to their performance and processability, but fillers play a critical role in adjusting the polymer network structure and electrochemical, thermal, and mechanical properties. Most fillers studied so far are anisotropic, limiting the possibility of homogeneous ion transport. Here, applying metal-organic framework (MOF) glass as an isotropic functional filler, solid-state polyethylene oxide (PEO) electrolytes are prepared. Calorimetric and diffusion kinetics tests show that the MOF glass addition reduces the glass transition temperature of the polymer phase, improving the mobility of the polymer chains, and thereby facilitating lithium (Li) ion transport. By also incorporating the lithium salt and ionic liquid (IL), Li-Li symmetric cell tests of the PEO-lithium salt-MOF glass-IL electrolyte reveal low overpotential, indicating low interfacial impedance. Simulations show that the isotropic structure of the MOF glass facilitates the wettability of the IL by enhancing interfacial interactions, leading to a less confined IL structure that promotes Li-ion mobility. Finally, the obtained electrolyte is used to construct Li-lithium iron phosphate full batteries that feature high cycle stability and rate capability. This work therefore demonstrates how an isotropic functional filler can be used to enhance the electrochemical performance of solid-state polymer electrolytes.

| S-EPMC10933666 | biostudies-literature

Growth of lithium-indium dendrites in all-solid-state lithium-based batteries with sulfide electrolytes.

Project description:All-solid-state lithium-based batteries with inorganic solid electrolytes are considered a viable option for electrochemical energy storage applications. However, the application of lithium metal is hindered by issues associated with the growth of mossy and dendritic Li morphologies upon prolonged cell cycling and undesired reactions at the electrode/solid electrolyte interface. In this context, alloy materials such as lithium-indium (Li-In) alloys are widely used at the laboratory scale because of their (electro)chemical stability, although no in-depth investigations on their morphological stability have been reported yet. In this work, we report the growth of Li-In dendritic structures when the alloy material is used in combination with a Li6PS5Cl solid electrolyte and Li(Ni0.6Co0.2Mn0.2)O2 positive electrode active material and cycled at high currents (e.g., 3.8 mA cm-2) and high cathode loading (e.g., 4 mAh cm-2). Via ex situ measurements and simulations, we demonstrate that the irregular growth of Li-In dendrites leads to cell short circuits after room-temperature long-term cycling. Furthermore, the difference between Li and Li-In dendrites is investigated and discussed to demonstrate the distinct type of dendrite morphology.

| S-EPMC8630065 | biostudies-literature

A universal wet-chemistry synthesis of solid-state halide electrolytes for all-solid-state lithium-metal batteries.

Project description:[Figure: see text].

| S-EPMC8442915 | biostudies-literature