Unknown

Dataset Information

0

Mechanical Behavior of a Medium-Entropy Fe65(CoNi)25Cr9.5C0.5 Alloy Produced by Selective Laser Melting.

ABSTRACT: Specimens of a medium-entropy Fe65(CoNi)25Cr9.5C0.5 (in at.%) alloy were produced using additive manufacturing (selective laser melting, SLM). The selected parameters of SLM resulted in a very high density in the specimens with a residual porosity of less than 0.5%. The structure and mechanical behavior of the alloy were studied under tension at room and cryogenic temperatures. The microstructure of the alloy produced by SLM comprised an elongated substructure, inside which cells with a size of ~300 nm were observed. The as-produced alloy demonstrated high yield strength and ultimate tensile strength (YS = 680 MPa; UTS = 1800 MPa) along with good ductility (tensile elongation = 26%) at a cryogenic temperature (77 K) that was associated with the development of transformation-induced plasticity (TRIP) effect. At room temperature, the TRIP effect was less pronounced. Consequently, the alloy demonstrated lower strain hardening and a YS/UTS of 560/640 MPa. The deformation mechanisms of the alloy are discussed.

SUBMITTER: Povolyaeva E 

PROVIDER: S-EPMC10145717 | biostudies-literature | 2023 Apr

REPOSITORIES: biostudies-literature

Json Xml
altmetric image

Publications

Mechanical Behavior of a Medium-Entropy Fe<sub>65</sub>(CoNi)<sub>25</sub>Cr<sub>9.5</sub>C<sub>0.5</sub> Alloy Produced by Selective Laser Melting.

Povolyaeva Elizaveta E   Shaysultanov Dmitry D   Astakhov Ilya I   Evlashin Stanislav S   Klimova Margarita M   Stepanov Nikita N   Zherebtsov Sergey S  

Materials (Basel, Switzerland) 20230418 8

Specimens of a medium-entropy Fe<sub>65</sub>(CoNi)<sub>25</sub>Cr<sub>9.5</sub>C<sub>0.5</sub> (in at.%) alloy were produced using additive manufacturing (selective laser melting, SLM). The selected parameters of SLM resulted in a very high density in the specimens with a residual porosity of less than 0.5%. The structure and mechanical behavior of the alloy were studied under tension at room and cryogenic temperatures. The microstructure of the alloy produced by SLM comprised an elongated subs  ...[more]

Similar Datasets

Unknown Magnetic properties of the complex concentrated alloy system CoFeNi<sub>0.5</sub>Cr<sub>0.5</sub>Al<sub>x</sub>.
| S-EPMC7468281 | biostudies-literature
Unknown Electronic transport properties of the Al<sub>0.5</sub>TiZrPdCuNi alloy in the high-entropy alloy and metallic glass forms.
| S-EPMC8831620 | biostudies-literature
Unknown Effect of FeCoNiCrCu<sub>0.5</sub> High-entropy-alloy Substrate on Sn Grain Size in Sn-3.0Ag-0.5Cu Solder.
| S-EPMC6403290 | biostudies-literature
Unknown Exchange bias effect in polycrystalline Bi<sub>0.5</sub>Sr<sub>0.5</sub>Fe<sub>0.5</sub>Cr<sub>0.5</sub>O<sub>3</sub> bulk.
| S-EPMC10113268 | biostudies-literature
Unknown Magnetic, electrical and mechanical properties of Fe<sub>40</sub>Mn<sub>40</sub>Co<sub>10</sub>Cr<sub>10</sub> high entropy alloy.
| S-EPMC8044135 | biostudies-literature
Unknown Co-Cr-Fe-Mn-Ni Oxide as a Highly Efficient Thermoelectric High-Entropy Alloy.
| S-EPMC10134248 | biostudies-literature
Unknown Producing Soft Magnetic Composites by Spark Plasma Sintering of Pseudo Core-Shell Ni-Fe Alloy@Mn<sub>0.5</sub>Zn<sub>0.5</sub>Fe<sub>2</sub>O<sub>4</sub> Powders.
| S-EPMC9862317 | biostudies-literature
Unknown Microstructure and Mechanical Properties of High-Entropy Alloy Co<sub>20</sub>Cr<sub>26</sub>Fe<sub>20</sub>Mn<sub>20</sub>Ni<sub>14</sub> Processed by High-Pressure Torsion at 77 K and 300 K.
| S-EPMC6056509 | biostudies-literature
Unknown Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy.
| S-EPMC7220923 | biostudies-literature
Unknown Effect of Selective Laser Melting Process Parameters on Microstructure and Properties of Co-Cr Alloy.
| S-EPMC6164890 | biostudies-other