Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Magnetic, electrical and mechanical properties of Fe₄₀Mn₄₀Co₁₀Cr₁₀ high entropy alloy.

ABSTRACT: A prototypical, single-phase, and non-equiatomic high entropy alloy Fe₄₀Mn₄₀Co₁₀Cr₁₀ has been mechanically deformed at room and cryogenic temperatures. Plastic deformation was accommodated via crystallographic slip at room temperature while transformation induced plasticity (TRIP) has been observed in samples deformed at 77 K. The stress-induced martensitic transformation occurred from face-centered cubic (FCC) to hexagonal close-packed (HCP) structures. A detailed electron backscatter diffraction analysis was utilized to detect phase change and evaluate the evolution of the HCP phase volume fraction as a function of plastic strain. Physical properties of undeformed and deformed samples were measured to elucidate the effect of deformation-induced phase transitions on the magnetic and electrical properties of Fe₄₀Mn₄₀Co₁₀Cr₁₀ alloy. Relatively small magnetic moments along with non-saturating magnetic field dependencies suggest that the ground state in the considered material is ferrimagnetic ordering with coexisting antiferromagnetic phase. The temperature evolution of the coercive fields has been revealed for all samples. The magnitudes of the coercive fields place the considered system into the semi-hard magnetic alloys category. The temperature dependence of the zero-field cooled (ZFC) and field cooled (FC) magnetization was measured for all samples in the low field regime and the origin of irreversibility in ZFC/FC curves was discussed. Besides, the temperature dependence of the resistivity in all samples was measured and the possible conduction mechanisms were discussed.

SUBMITTER: Egilmez M

PROVIDER: S-EPMC8044135 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Co-Cr-Fe-Mn-Ni Oxide as a Highly Efficient Thermoelectric High-Entropy Alloy.

Project description:Among the existing materials for heat conversion, high-entropy alloys are of great interest due to the tunability of their functional properties. Here, we aim to produce single-phase high-entropy oxides composed of Co-Cr-Fe-Mn-Ni-O through spark plasma sintering (SPS), testing their thermoelectric (TE) properties. This material was successfully obtained before via a different technique, which requires a very long processing time. Hence, the main target of this work is to apply spark plasma sintering, a much faster and scalable process. The samples were sintered in the temperature range of 1200-1300 °C. Two main phases were formed: rock salt-structured Fm3̅m and spinel-structured Fd3̅m. Comparable transport properties were achieved via the new approach: the highest value of the Seebeck coefficient reached -112.6 μV/K at room temperature, compared to -150 μV/K reported before; electrical properties at high temperatures are close to the properties of the single-phase material (σ = 0.2148 S/cm, σ ≈ 0.2009 S/cm reported before). These results indicate that SPS can be successfully applied to produce highly efficient TE high-entropy alloys in a fast and scalable way. Further optimization is needed for the production of single-phase materials, which are expected to exhibit an even better TE functionality.

| S-EPMC10134248 | biostudies-literature

Microstructure and Mechanical Properties of High-Entropy Alloy Co20Cr26Fe20Mn20Ni14 Processed by High-Pressure Torsion at 77?K and 300?K.

Project description:In this work, the mechanical characteristics of high-entropy alloy Co20Cr26Fe20Mn20Ni14 with low-stacking fault energy processed by cryogenic and room temperature high-pressure torsion (HPT) were studied. X-ray diffraction, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analyses were performed to identify the phase and microstructure variation and the mechanical properties characterized by Vickers hardness measurements and tensile testing. Cryogenic HPT was found to result in a lower mechanical strength of alloy Co20Cr26Fe20Mn20Ni14 than room temperature HPT. Microstructure analysis by SEM and TEM was conducted to shed light on the microstructural changes in the alloy Co20Cr26Fe20Mn20Ni14 caused by HPT processing. Electron microscopy data provided evidence of a deformation-induced phase transformation in the alloy processed by cryogenic HPT. Unusual softening phenomena induced by cryogenic HPT were characterized by analyzing the dislocation density as determined from X-Ray diffraction peak broadening.

| S-EPMC6056509 | biostudies-literature

Mesoporous Ni60Fe30Mn10-alloy based metal/metal oxide composite thick films as highly active and robust oxygen evolution catalysts †.

Project description:A major challenge in the field of water electrolysis is the scarcity of oxygen-evolving catalysts that are inexpensive, highly corrosion-resistant, suitable for large-scale applications and able to oxidize water at high current densities and low overpotentials. Most unsupported, non-precious metals oxygen-evolution catalysts require at least ~350 mV overpotential to oxidize water with a current density of 10 mA/cm2 in 1 M alkaline solution. Here we report on a robust nanostructured porous NiFe-based oxygen evolution catalyst made by selective alloy corrosion. In 1 M KOH, our material exhibits a catalytic activity towards water oxidation of 500 mA/cm2 at 360 mV overpotential and is stable for over eleven days. This exceptional performance is attributed to three factors. First, the small size of the ligaments and pores in our mesoporous catalyst (~10 nm) results in a high BET surface area (43 m2/g) and therefore a high density of oxygen-evolution catalytic sites per unit mass. Second, the open porosity facilitates effective mass transfer at the catalyst/electrolyte interface. Third and finally, the high bulk electrical conductivity of the mesoporous catalyst allows for effective current flow through the electrocatalyst, making it possible to use thick films with a high density of active sites and ~3×104 cm2 of catalytic area per cm2 of electrode area. Our mesoporous catalyst is thus attractive for alkaline electrolyzers where water-based solutions are decomposed into hydrogen and oxygen as the only products, driven either conventionally or by photovoltaics.

| S-EPMC6456064 | biostudies-literature

Au19M (M=Cr, Mn, and Fe) as magnetic copies of the golden pyramid.

Project description:An investigation on structure, stability, and magnetic properties of singly doped Au19M (M=Cr, Mn, and Fe) clusters is carried out by means of density functional theory calculations. The studied clusters prefer forming magnetic versions of the unique tetrahedral Au20. Stable sextet Au19Cr is identified as the least reactive species and can be qualified as a magnetic superatom. Analysis on cluster electronic structures shows that the competition between localized and delocalized electronic states governs the stability and magnetic properties of Au19M clusters.

| S-EPMC5700080 | biostudies-literature

Data on the microstructure and deformation of Fe50Mn25Cr15Co10Nx (x=0∼1.6) supporting the modifications of partial-dislocation-induced defects (PDIDs) and strength/ductility enhancement in metastable high entropy alloys.

Project description:The data presented in this article are related to a research paper on the modification of deformed nanostructure and mechanical performance of metastable high entropy alloys (HEAs) [1]. Fe50Mn25Cr15Co10 alloys with and without nitrogen were synthesized in a vacuum induction furnace using pure metals of 99.99% purity and FeCrN2 as nitrogen source. The nitrogen content was determined by Leco O/N-836 determinator for nitrogen-doped alloys. Transmission electron microscopy (TEM) were carried at 200 kV equipped with energy dispersive spectroscopy (EDS). Tensile testing was performed at room temperature. The strain rate jump tests were conducted by changing the strain rate between 10-3 and 10-2 s-1 to measure the strain rate sensitivity. The nanostructural evolutions by deformation including extended stacking faults (ESFs), ε-martensite and twins were examined using EBSD and TEM for the annealed samples and those strained to different strain levels. The role of partial dislocations on the formation of various PDIDs were analysed and the energies stored as deformed nanostructure (ESDN) after the PDID band formation were used to predict the evolution of various nanostructure with strain. The data and approach would provide a useful insight into the nanostructural evolution in metastable high entropy alloys.

| S-EPMC7807141 | biostudies-literature

Optimizing mechanical properties of Fe26.7Co26.7Ni26.7Si8.9B11 high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition.

Project description:High-entropy alloys (HEAs) have inspired considerable interest due to their attractive physical and mechanical properties. In this work, the microstructural evolution induced by different heat treatments on rapidly solidified hypoeutectic precursors of a Fe26.7Co26.7Ni26.7Si8.9B11 HEA is investigated and correlated with the corresponding mechanical properties. The microstructures of the rapidly solidified precursors are composed of primary fcc solid solution dendrites embedded in a eutectic matrix. When the samples are annealed at different temperatures after furnace cooling or quenching, respectively, the eutectic structure gradually decomposes into fcc, tetragonal (Fe,Co)2B, and hexagonal Ni31Si12 crystals with increasing annealing temperature, leading to a gradual increase of the content of the fcc crystals and both their aggregation and coarsening. Then the dominant structural framework gradually transforms from eutectic structures to fcc dendrites and ultimately the (Fe,Co)2B crystals become isolated as dominant reinforcement particles distributed in the interdendritic regions. This gradual microstructural transition from hypoeutectic to quasi-duplex structures leads to the change of the dominant deformation mechanism from crack-controlled to dislocation-dominated deformation, which allows to control both ductility and strength in a wide range. Hence, this study provides some guideline for how to tune the microstructure and mechanical properties of HEAs.

| S-EPMC6344508 | biostudies-literature

Activation of H2S by Atomic Cr, Mn, and Fe: Matrix Infrared Spectra and Quantum Chemical Calculations.

Project description:Hydrogen sulfide is toxic and corrosive gas abundantly available in nature. The activation of hydrogen sulfide to produce hydrogen and elemental sulfur is of great significance for possible applications in toxic pollutant control and hydrogen energy regeneration. The activation of H2S by transition metal atoms (M = Cr, Mn, and Fe) has been studied by low-temperature matrix isolation infrared spectroscopy and quantum chemical calculations. Experimental and theoretical results indicate that the reaction between ground-state M atoms and H2S is inhibited by the repulsive interactions between the reactants. After being excited upon photolysis, the corresponding excited-state M atoms react with H2S molecules spontaneously. The produced insertion product HMSH further decomposed to metal sulfides upon full-arc mercury lamp irradiation by the splitting of hydrogen.

| S-EPMC9404174 | biostudies-literature

Producing Soft Magnetic Composites by Spark Plasma Sintering of Pseudo Core-Shell Ni-Fe Alloy@Mn0.5Zn0.5Fe2O4 Powders.

Project description:Soft magnetic composite (SMC) cores have been obtained by Spark Plasma Sintering (SPS) using pseudo core-shell powders. Pseudo core-shell powders are formed by a core of soft magnetic particle (nanocrystalline permalloy or supermalloy) surrounded by a thin layer (shell) of nanosized soft ferrite (Mn0.5Zn0.5Fe2O4). Three compositions of pseudo core-shell powders were prepared, with 1, 2 and 3 wt.% of manganese-zinc mixt ferrite. The pseudo core-shell powders were compacted by SPS at temperatures between 500 and 700 °C, with a holding time ranging from 0 to 10 min. Several techniques have been used for characterization of the samples, both, powders and compacts X-ray diffraction (XRD, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), magnetic hysteresis measurements (DC and AC) and electrical resistivity. The electrical resistivity is in the order of 1 × 10-2 Ωm, 3-4 orders of magnitude higher than supermalloy electrical resistivity. The SPS at lower temperatures (500 °C) conserves the initial phases of the composite, but increasing the sintering temperature and/or sintering time produces a solid-state reaction between the alloy and ferrite phases, with negative consequence on the magnetic properties of the compacts. The initial relative permeability is around 40 and remains constant until to 2000 Hz. The power losses are lower than 2 W/kg until to 2000 Hz.

| S-EPMC9862317 | biostudies-literature

Small-scale mechanical behavior of a eutectic high entropy alloy.

Project description:Eutectic high entropy alloys, with lamellar arrangement of solid solution phases, represent a new paradigm for simultaneously achieving high strength and ductility, thereby circumventing this well-known trade-off in conventional alloys. However, dynamic strengthening mechanisms and phase-boundary interactions during external loading remain unclear for these eutectic systems. In this study, small-scale mechanical behavior was evaluated for AlCoCrFeNi2.1 eutectic high entropy alloy, consisting of a lamellar arrangement of L12 and B2 solid-solution phases. The ultimate tensile strength was 1165 MPa with ductility of ~18% and ultimate compressive strength was 1863 MPa with a total compressive fracture strain of ~34%. Dual mode fracture was observed with ductile failure for L12 phase and brittle mode for B2 phase. Phase-specific mechanical tests using nano-indentation and micro-pillar compression showed higher hardness and strength and larger strain rate sensitivity for B2 compared with L12. Micro-pillars on B2 phase deformed by plastic barreling while L12 micro-pillars showed high density of slip steps due to activation of more slip systems and homogenous plastic flow. Mixed micro-pillars containing both the phases exhibited dual yielding behavior while the interface between L12 and B2 was well preserved without any sign of separation or cracking. Phase-specific friction analysis revealed higher coefficient of friction for B2 compared to L12. These results will pave the way for fundamental understanding of phase-specific contribution to bulk mechanical response of concentrated alloys and help in designing structural materials with high fracture toughness.

| S-EPMC7021732 | biostudies-literature

Influence of ordered L12 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy.

Project description:Recent studies indicate that eutectic high-entropy alloys can simultaneously possess high strength and high ductility, which have potential industrial applications. The present study focuses on Al0.7CoCrFeNi, a lamellar dual-phase (fcc + B2) precipitation-strengthenable eutectic high entropy alloy. This alloy exhibits an fcc + B2 (B2 with bcc nano-precipitates) microstructure resulting in a combination of the soft and ductile fcc phase together with hard B2 phase. Low temperature annealing leads to the precipitation of ordered L12 intermetallic precipitates within the fcc resulting in enhanced strength. The strengthening contribution due to fine scale L12 is modeled using Orowan dislocation bowing and by-pass mechanism. The alloy was tested under quasi-static (strain-rate = 10-3 s-1) tensile loading and dynamic (strain-rate = 103 s-1) compressive loading. Due to the fine lamellar microstructure with a large number of fcc-bcc interfaces, the alloy show relatively high flow-stresses, ~1400 MPa under quasi-static loading and in excess of 1800 MPa under dynamic loading. Interestingly, the coherent nano-scale L12 precipitate caused a significant rise in the yield strength, without affecting the strain rate sensitivity (SRS) significantly. These lamellar structures had higher work hardening due to their capability for easily storing higher dislocation densities. The back-stresses from the coherent L12 precipitate were insufficient to cause improvement in twin nucleation, owing to elevated twinning stress under quasi-static testing. However, under dynamic testing high density of twins were observed.

| S-EPMC6478865 | biostudies-literature