Techno-Economic Analysis and Life Cycle Assessment of High-Velocity Oxy-Fuel Technology Compared to Chromium Electrodeposition.
Ontology highlight
ABSTRACT:
SUBMITTER: Merlo A
PROVIDER: S-EPMC10223351 | biostudies-literature | 2023 May
REPOSITORIES: biostudies-literature
Publications
Techno-Economic Analysis and Life Cycle Assessment of High-Velocity Oxy-Fuel Technology Compared to Chromium Electrodeposition.
Merlo Antoine A Duminica Florin F Daniel Alain A Léonard Grégoire G
Materials (Basel, Switzerland) 20230511 10
Due to the toxicity associated with chromium electrodeposition, alternatives to that process are highly sought after. One of those potential alternatives is High Velocity Oxy-Fuel (HVOF). In this work, a HVOF installation is compared with chromium electrodeposition from environmental and economic points of view by using Life Cycle Assessment (LCA) and Techno-Economic Analysis (TEA) for the evaluation. Costs and environmental impacts per piece coated are then evaluated. On an economic side, the l ...[more]
Similar Datasets
Project description:BackgroundAlcohol-to-jet (ATJ) is one of the technical feasible biofuel technologies. It produces jet fuel from sugary, starchy, and lignocellulosic biomass, such as sugarcane, corn grain, and switchgrass, via fermentation of sugars to ethanol or other alcohols. This study assesses the ATJ biofuel production pathway for these three biomass feedstocks, and advances existing techno-economic analyses of biofuels in three ways. First, we incorporate technical uncertainty for all by-products and co-products though statistical linkages between conversion efficiencies and input and output levels. Second, future price uncertainty is based on case-by-case time-series estimation, and a local sensitivity analysis is conducted with respect to each uncertain variable. Third, breakeven price distributions are developed to communicate the inherent uncertainty in breakeven price. This research also considers uncertainties in utility input requirements, fuel and by-product outputs, as well as price uncertainties for all major inputs, products, and co-products. All analyses are done from the perspective of a private firm.ResultsThe stochastic dominance results of net present values (NPV) and breakeven price distributions show that sugarcane is the lowest cost feedstock over the entire range of uncertainty with the least risks, followed by corn grain and switchgrass, with the mean breakeven jet fuel prices being $0.96/L ($3.65/gal), $1.01/L ($3.84/gal), and $1.38/L ($5.21/gal), respectively. The variation of revenues from by-products in corn grain pathway can significantly impact its profitability. Sensitivity analyses show that technical uncertainty significantly impacts breakeven price and NPV distributions.ConclusionsTechnical uncertainty is critical in determining the economic performance of the ATJ fuel pathway. Technical uncertainty needs to be considered in future economic analyses. The variation of revenues from by-products plays a significant role in profitability. With the distribution of breakeven prices, potential investors can apply whatever risk preferences they like to determine an appropriate bid or breakeven price that matches their risk profile.
| S-EPMC5244559 | biostudies-literature
Project description: Not available
| S-EPMC11228923 | biostudies-literature
Project description:The recycling of multimaterials such as payment or access cards poses significant challenges. Building on previous experimental work demonstrating the feasibility of chemically recyclable payment cards made from glycol-modified poly(ethylene terephthalate) (PET-G), we use life cycle assessment and techno-economic analysis to investigate two chemical recycling scenarios and evaluate their potential environmental and economic benefits. Recovering all components from the depolymerized products (Scenario 1) achieves substantial environmental benefits across most categories, reducing global warming by up to 67% compared to only recovering major components (Scenario 2). However, the environmental benefits in Scenario 1 incur 69% higher total annualized costs, causing its profitability to be dependent on a minimum selling price of £13.4/kg for cyclohexanedimethanol and less than a 10% discount rate. In contrast, Scenario 2 is less sensitive to discount rate variation and thus a lower risk and more economically feasible option, albeit less environmentally sustainable.
| S-EPMC10598876 | biostudies-literature
Project description:BackgroundMicroalgae-based high-density fuels offer an efficient and environmental pathway towards decarbonization of the transport sector and could be produced as part of a globally distributed network without competing with food systems for arable land. Variations in climatic and economic conditions significantly impact the economic feasibility and productivity of such fuel systems, requiring harmonized technoeconomic assessments to identify important conditions required for commercial scale up.MethodsHere, our previously validated Techno-economic and Lifecycle Analysis (TELCA) platform was extended to provide a direct performance comparison of microalgae diesel production at 12 international locations with variable climatic and economic settings. For each location, historical weather data, and jurisdiction-specific policy and economic inputs were used to simulate algal productivity, evaporation rates, harvest regime, CapEx and OpEx, interest and tax under location-specific operational parameters optimized for Minimum Diesel Selling Price (MDSP, US$ L-1). The economic feasibility, production capacity and CO2-eq emissions of a defined 500 ha algae-based diesel production facility is reported for each.ResultsUnder a for-profit business model, 10 of the 12 locations achieved a minimum diesel selling price (MDSP) under US$ 1.85 L-1 / US$ 6.99 gal-1. At a fixed theoretical MDSP of US$ 2 L-1 (US$ 7.57 gal-1) these locations could achieve a profitable Internal Rate of Return (IRR) of 9.5-22.1%. Under a public utility model (0% profit, 0% tax) eight locations delivered cost-competitive renewable diesel at an MDSP of < US$ 1.24 L-1 (US$ 4.69 gal-1). The CO2-eq emissions of microalgae diesel were about one-third of fossil-based diesel.ConclusionsThe public utility approach could reduce the fuel price toward cost-competitiveness, providing a key step on the path to a profitable fully commercial renewable fuel industry by attracting the investment needed to advance technology and commercial biorefinery co-production options. Governments' adoption of such an approach could accelerate decarbonization, improve fuel security, and help support a local COVID-19 economic recovery. This study highlights the benefits and limitations of different factors at each location (e.g., climate, labour costs, policy, C-credits) in terms of the development of the technology-providing insights on how governments, investors and industry can drive the technology forward.
| S-EPMC8183327 | biostudies-literature
Project description:CO2-enhanced oil recovery (EOR) can have less GHG emissions compared to conventional oil production methods. The economy of CO2-EOR can significantly benefit from the recent rise of carbon prices in carbon markets due to its greenhouse gas (GHG) emission savings. This study conducted a life cycle assessment (LCA) of CO2-EOR in major hydrocarbon provinces of the world. Estimated net GHG emissions of CO2-EOR were compared with GHG emissions of average produced oil in the given country. When sourcing CO2 from coal-fired power plants, Kazakhstan and China have net GHG emissions of CO2-EOR of 276 and 380 kg CO2 eq/bbl, respectively, which are lower than the GHG emission factor of average oil produced in each of them. Significantly lower GHG emissions of CO2-EOR are observed in other hydrocarbon provinces (Iraq, Saudi Arabia, Kuwait, etc.), where CO2 could be delivered from Natural Gas Combined Cycle (NGCC) power plants. However, the cost of CO2 capture is higher at NGCC power plants than at coal-fired power plants. Further, we developed a techno-economic assessment (TEA) model of the CO2-EOR and integrated it with LCA to thoroughly consider carbon credits in its economy. The model was built based upon previous investigations and used statistics from a large industrial data set of CO2-EOR to produce accurate estimates of the CO2-EOR economy. The technical model iteratively estimated the balance of three fluids (crude oil, CO2, and water) in the CO2-EOR system with a 25 year operational lifespan and obtained actual data for the LCA and TEA models. The model was simulated for the Kazakhstan case with its oil market conditions for a demonstration purpose. TEA results showed that, with the available low-cost CO2 capture source or high CO2 cost in carbon trading, CO2-EOR can compete with current upstream projects in Kazakhstan by simultaneously increasing oil production and reducing GHG emissions.
| S-EPMC9231375 | biostudies-literature
Project description:BackgroundThe overall goal of the present study is to investigate the economics of an integrated biorefinery converting hybrid poplar into jet fuel, xylitol, and formic acid. The process employs a combination of integrated biological, thermochemical, and electrochemical conversion pathways to convert the carbohydrates in poplar into jet fuel, xylitol, and formic acid production. The C5-sugars are converted into xylitol via hydrogenation. The C6-sugars are converted into jet fuel via fermentation into ethanol, followed by dehydration, oligomerization, and hydrogenation into jet fuel. CO2 produced during fermentation is converted into formic acid via electrolysis, thus, avoiding emissions and improving the process's overall carbon conversion.ResultsThree different biorefinery scales are considered: small, intermediate, and large, assuming feedstock supplies of 150, 250, and 760 dry ktonne of poplar/year, respectively. For the intermediate-scale biorefinery, a minimum jet fuel selling price of $3.13/gallon was obtained at a discount rate of 15%. In a favorable scenario where the xylitol price is 25% higher than its current market value, a jet fuel selling price of $0.64/gallon was obtained. Co-locating the biorefinery with a power plant reduces the jet fuel selling price from $3.13 to $1.03 per gallon.ConclusionA unique integrated biorefinery to produce jet fuel was successfully modeled. Analysis of the biorefinery scales shows that the minimum jet fuel selling price for profitability decreases with increasing biorefinery scale, and for all scales, the biorefinery presents favorable economics, leading to a minimum jet fuel selling price lower than the current price for sustainable aviation fuel (SAF). The amount of xylitol and formic produced in a large-scale facility corresponds to 43% and 25%, respectively, of the global market volume of these products. These volumes will saturate the markets, making them infeasible scenarios. In contrast, the small and intermediate-scale biorefineries have product volumes that would not saturate current markets, does not present a feedstock availability problem, and produce jet fuel at a favorable price given the current SAF policy support. It is shown that the price of co-products greatly influences the minimum selling price of jet fuel, and co-location can further reduce the price of jet fuel.
| S-EPMC9768886 | biostudies-literature
Project description:Torrefied pellets have gained more commercial importance due to their excellent performance in combustion, co-firing and gasification. The present investigation provides a conceptual design for torrefied fuel pellets production via combined torrefaction and pelletization technologies with and without additives. The entire design contains torrefaction unit, grinding, preparation of pellet formulation, pelletizing, and finally cooling of pellets. Two scenarios, scenario 1 (pelletization of torrefied biomass with additives) and scenario 2 (pelletization of torrefied biomass without any external additives) were tested and compared. The economic analysis suggests that both scenarios are profitable. Both scenarios were simulated using Aspen plus™, and economic feasibility was estimated using a complete cash flow analysis for a base case plant with 40,080 tonne/y capacity. For both cases, a discounted cash flow is a useful tool for estimating the minimal selling price for torrefied pellets as well as the capital investment, production cost and operating costs. The cost of the reactor used for torrefaction was found to be the most important component of combined torrefaction and pelletization system. The lowest selling price of generated torrefied pellets was found to be $103.4 and $105.1 per tonne at the plant gate for scenarios 1 and 2, respectively. Sensitivity analysis shows that, among all variable costs, labor cost has the highest influence on both net present value (NPV) and minimum selling price (MSP) in making pellets for both the scenarios. Furthermore, the internal rate of return was found to be25% and 22% at 10% discounted cash flow rate for scenarios 1 and 2, respectively. The framework that was created was found to lessen over-dependence on wood or fossil fuels and facilitate the promotion of bioenergy in rural areas.
| S-EPMC10227336 | biostudies-literature
Project description:Reductive catalytic fractionation (RCF) is a promising approach to fractionate lignocellulose and convert lignin to a narrow product slate. To guide research towards commercialization, cost and sustainability must be considered. Here we report a techno-economic analysis (TEA), life cycle assessment (LCA), and air emission analysis of the RCF process, wherein biomass carbohydrates are converted to ethanol and the RCF oil is the lignin-derived product. The base-case process, using a feedstock supply of 2000 dry metric tons per day, methanol as a solvent, and H2 gas as a hydrogen source, predicts a minimum selling price (MSP) of crude RCF oil of $1.13 per kg when ethanol is sold at $2.50 per gallon of gasoline-equivalent ($0.66 per liter of gasoline-equivalent). We estimate that the RCF process accounts for 57% of biorefinery installed capital costs, 77% of positive life cycle global warming potential (GWP) (excluding carbon uptake), and 43% of positive cumulative energy demand (CED). Of $563.7 MM total installed capital costs, the RCF area accounts for $323.5 MM, driven by high-pressure reactors. Solvent recycle and water removal via distillation incur a process heat demand equivalent to 73% of the biomass energy content, and accounts for 35% of total operating costs. In contrast, H2 cost and catalyst recycle are relatively minor contributors to operating costs and environmental impacts. In the carbohydrate-rich pulps, polysaccharide retention is predicted not to substantially affect the RCF oil MSP. Analysis of cases using different solvents and hemicellulose as an in situ hydrogen donor reveals that reducing reactor pressure and the use of low vapor pressure solvents could reduce both capital costs and environmental impacts. Processes that reduce the energy demand for solvent separation also improve GWP, CED, and air emissions. Additionally, despite requiring natural gas imports, converting lignin as a biorefinery co-product could significantly reduce non-greenhouse gas air emissions compared to burning lignin. Overall, this study suggests that research should prioritize ways to lower RCF operating pressure to reduce capital expenses associated with high-pressure reactors, minimize solvent loading to reduce reactor size and energy required for solvent recovery, implement condensed-phase separations for solvent recovery, and utilize the entirety of RCF oil to maximize value-added product revenues.
| S-EPMC9562980 | biostudies-literature
Project description:Nonisocyanate polyurethanes (NIPUs) show promise as more sustainable alternatives to conventional isocyanate-based polyurethanes (PUs). In this study, polyhydroxyurethane (PHU) and nonisocyanate polythiourethane (NIPTU) production and reprocessing models inform the results of a techno-economic analysis and a life cycle assessment. The profitability of selling PHU and NIPTU is rationalized by identifying significant production costs, indicating that raw materials drive the costs of PHU and NIPTU production and reprocessing. After stepping along a path of process improvements, PHU and NIPTU can achieve minimum selling prices (MSPs) of 3.15 and 4.39 USD kg-1, respectively. Depolymerization yields need to be optimized, and polycondensation reactions need to be investigated for the reprocessing of NIPUs into secondary (2°) NIPUs. Of the NIPUs examined here, PHU has a low depolymerization yield and NIPTU has a high depolymerization yield. Fossil energy use, greenhouse gas (GHG) emissions, and water consumption are reported for the biobased production of PHU, NIPTU, 2° PHU, and 2° NIPTU and compared with baseline values for fossil-based PU production. There are options for reducing environmental impacts, which could make these pathways more sustainable. If barriers to implementation are overcome, 2° NIPUs can be manufactured at lower cost and environmental impacts than those of virgin NIPUs.
| S-EPMC11323267 | biostudies-literature
Project description:To satisfy the growing demand for limonene, novel pathways for microbial production of limonene have been sought. A techno-economic analysis is carried out for one such process producing limonene from sugar at an industrial plant scale to assess potential economic viability. A conceptual design of the process is developed, in which a gas stripping-solvent scrubbing method is chosen for recovering limonene from bioreactors based on consideration of payback time and process operability. Minimum limonene selling prices are estimated over a range of fermentation productivity based on the calculation of net present value using discounted cash flow method. Under 45% of the maximum theoretical yield, the selling price reaches $19.9/kg, which could be competitive with established production processes when fermentation productivity is above 0.7 kg/(m3·h). Reduction of cost could be realised through improvement of microbial strains, utilisation of cheaper feedstocks, reduction in capital investment and strategic business planning.
| S-EPMC7001033 | biostudies-literature