Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data on microstructural and optoelectronic properties of electrodeposited silver mesh transparent conducting electrodes.

ABSTRACT: Electrodeposited Ag mesh transparent conducting electrodes (TCEs) based on self-cracking templates can achieve high optical transmittances and low sheet resistances by controlling the shape of the self-cracking templates and electrodeposition duration. The surface coverage of the mesh is mainly determined by the surface shape of the self-cracking template. Electrodeposition of Ag can adjust the thickness of the mesh, significantly reducing the sheet resistance while maintaining the high optical transmittance of the TCEs. The TCE electrodeposited for 30 s exhibited an optical transmittance as high as 88.4% and a sheet resistance as low as 2.24 Ω/□. Here we provide the microstructural and optoelectronic performance data of the electrodeposited Ag mesh TCEs.

SUBMITTER: Kang S

PROVIDER: S-EPMC10293949 | biostudies-literature | 2023 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Data on microstructural and optoelectronic properties of electrodeposited silver mesh transparent conducting electrodes.

Kang Seoin S Chung Choong-Heui CH

Data in brief 20230518

Electrodeposited Ag mesh transparent conducting electrodes (TCEs) based on self-cracking templates can achieve high optical transmittances and low sheet resistances by controlling the shape of the self-cracking templates and electrodeposition duration. The surface coverage of the mesh is mainly determined by the surface shape of the self-cracking template. Electrodeposition of Ag can adjust the thickness of the mesh, significantly reducing the sheet resistance while maintaining the high optical ...[more]

PMID: 37383753

Similar Datasets

Multiobjective Optimization of Silver-Nanowire Deposition for Flexible Transparent Conducting Electrodes.

Project description:Optimizing the spin coating of silver nanowires to form transparent conducting electrodes (TCE) is guided by machine learning (ML). A good TCE has two competing characteristics: high transmittance and high conductance. Optimization using a scalar figure of merit, as often done in the field, cannot satisfy the independent requirements for transmittance and conductance imposed by specific applications. By performing a Pareto front analysis based on ML models, we show that the desired outcomes of transmittance ≥ 75% and sheet resistance ≤ 15 Ω/sq are challenging but can be achieved using processing parameters identified by ML analysis.

| S-EPMC10580235 | biostudies-literature

Optoelectronic and Electrothermal Properties of Transparent Conductive Silver Nanowires Films.

Project description:Silver nanowires (AgNWs) show promise for fabricating flexible transparent conductors owing to their excellent conductivity, high transparency, and good mechanical properties. Here, we present the fabrication of transparent films composed of AgNWs with diameters of 20-30 nm and lengths of 25-30 μm on polyethylene terephthalate substrates and glass slides substrates using the Meyer rod method. We systematically investigated the films' optoelectronic and electrothermal properties. The morphology remained intact when heated at 25-150 °C and the AgNWs film showed high conductivity (17.6-14.3 Ω∙sq-1), excellent transmittance (93.9-91.8%) and low surface roughness values (11.2-14.7 nm). When used as a heater, the transparent AgNW conductive film showed rapid heating at low input voltages owing to a uniform heat distribution across the whole substrate surface. Additionally, the conductivity of the film decreased with increasing bending cycle numbers; however, the film still exhibited a good conductivity and heating performances after repeated bending.

| S-EPMC6631837 | biostudies-literature

Thermal stability data of silver nanowire transparent conducting electrode.

Project description:The authors have recently reported the enhanced thermal stability of silver nanowire (AgNW) network transparent electrodes by electrodeposition method [1]. AgNW networks are known to break into droplets at elevated temperatures (spherodization temperature) that are still much lower than the bulk Ag melting temperature. This phenomenon is known as Rayleigh instability. As the diameter of individual AgNW in the network increases by electrodeposited Ag on the AgNW surface, the thermal stability of AgNW network can be enhanced. Here, we provide the data on the spherodization temperature depending on AgNW diameter. We also report the calculated activation energy required to induce the spherodization of AgNW network.

| S-EPMC7109625 | biostudies-literature

Cu mesh for flexible transparent conductive electrodes.

Project description:Copper electrodes with a micromesh/nanomesh structure were fabricated on a polyimide substrate using UV lithography and wet etching to produce flexible transparent conducting electrodes (TCEs). Well-defined mesh electrodes were realized through the use of high-quality Cu thin films. The films were fabricated using radio-frequency (RF) sputtering with a single-crystal Cu target--a simple but innovative approach that overcame the low oxidation resistance of ordinary Cu. Hybrid Cu mesh electrodes were fabricated by adding a capping layer of either ZnO or Al-doped ZnO. The sheet resistance and the transmittance of the electrode with an Al-doped ZnO capping layer were 6.197 ohm/sq and 90.657%, respectively, and the figure of merit was 60.502 × 10(-3)/ohm, which remained relatively unchanged after thermal annealing at 200 °C and 1,000 cycles of bending. This fabrication technique enables the mass production of large-area flexible TCEs, and the stability and high performance of Cu mesh hybrid electrodes in harsh environments suggests they have strong potential for application in smart displays and solar cells.

| S-EPMC4454070 | biostudies-literature

Nanoscale Chemical and Electrical Stabilities of Graphene-covered Silver Nanowire Networks for Transparent Conducting Electrodes.

Project description:The hybrid structure of Ag nanowires (AgNWs) covered with graphene (Gr) shows synergetic effects on the performance of transparent conducting electrodes (TCEs). However, these effects have been mainly observed via large-scale characterization, and precise analysis at the nanoscale level remains inadequate. Here, we present the nanoscale verification and visualization of the improved chemical and electrical stabilities of Gr-covered AgNW networks using conductive atomic force microscopy (C-AFM), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS) combined with the gas cluster ion beam (GCIB) sputtering technique. Specifically by transferring island Gr on top of the AgNW network, we were able to create samples in which both covered and uncovered AgNWs are simultaneously accessible to various surface-characterization techniques. Furthermore, our ab initio molecular dynamics (AIMD) simulation elucidated the specific mechanistic pathway and a strong propensity for AgNW sulfidation, even in the presence of ambient oxidant gases.

| S-EPMC5020617 | biostudies-literature

Silver Nanowire-IZO-Conducting Polymer Hybrids for Flexible and Transparent Conductive Electrodes for Organic Light-Emitting Diodes.

Project description:Solution-processed silver nanowire (AgNW) has been considered as a promising material for next-generation flexible transparent conductive electrodes. However, despite the advantages of AgNWs, some of their intrinsic drawbacks, such as large surface roughness and poor interconnection between wires, limit their practical application in organic light-emitting diodes (OLEDs). Herein, we report a high-performance AgNW-based hybrid electrode composed of indium-doped zinc oxide (IZO) and poly (3,4-ethylenediowythiophene):poly(styrenesulfonate) [PEDOT:PSS]. The IZO layer protects the underlying AgNWs from oxidation and corrosion and tightly fuses the wires together and to the substrate. The PEDOT:PSS effectively reduces surface roughness and increases the hybrid films' transmittance. The fabricated electrodes exhibited a low sheet resistance of 5.9 Ωsq-1 with high transmittance of 86% at 550 nm. The optical, electrical, and mechanical properties of the AgNW-based hybrid films were investigated in detail to determine the structure-property relations, and whether optical or electrical properties could be controlled with variation in each layer's thickness to satisfy different requirements for different applications. Flexible OLEDs (f-OLEDs) were successfully fabricated on the hybrid electrodes to prove their applicability; their performance was even better than those on commercial indium doped tin oxide (ITO) electrodes.

| S-EPMC5050450 | biostudies-literature

Data on the effect of CdS on the lateral collection length of charge carriers for Cu(In,Ga)Se2 solar cells with mesh transparent conducting electrodes.

Project description:Mesh transparent conducting electrodes (TCEs) have been successfully employed to Cu(In,Ga)Se2 (CIGS) solar cells (Lee et al., 2018; Jang et al., 2017; Lee et al., 2020) [1-3]. Lateral motion of charge carriers is necessarily required for the carriers to be collected in CIGS solar cell cells having mesh TCEs. Lateral collection length of carriers can be obtain based on the lateral photocurrent values measured in custom designed CIGS test structures, which in turn enables to determine an optimum design of mesh TCEs for these CIGS solar cells (Lee et al., 2019) [4]. In a standard CIGS solar cell, a CdS layer is required to be fully cover the CIGS whole surface. However, it is not the case for mesh TCE based CIGS solar cells (Chung, 2019) [5]. The presence or absence of the CdS layer on the CIGS/Mo planar stack alters the traveling path of the charge carriers, which in turn will affect the lateral photocurrent values. Therefore, it will be helpful to know the effect of the presence or absence of the CdS layer on the lateral photocurrents in mesh TCE based CIGS solar cells.

| S-EPMC7063106 | biostudies-literature

Chemically-stable flexible transparent electrode: gold-electrodeposited on embedded silver nanowires.

Project description:Silver nanowires (AgNWs) with a low diameter, high aspect ratio, stable suspension, and easy synthesis have recently attracted the optoelectronic industry as a low-cost alternative to indium tin oxide transparent conductive films. However, silver nanowires are not chemically stable, and their conductivity diminishes over time due to reactions with atmospheric components. This is a bottleneck for their wide industrial applications. In this study, we aim to address this issue by synthesizing silver nanowires with an average diameter of approximately 65 nm and a length of approximately 13 µm. The prepared Ag nanowires are then applied to fabricate transparent, flexible, and chemically stable conductive films. The fabrication includes spraying of silver nanowires suspension on a glass substrate followed by Dr. blade coating of polystyrene (PS) solution and delamination of the PS-AgNWs film. The resulting film exhibits an optimum sheet resistance of 24 Ω/□ and transmittance of 84%. To further enhance the stability of the transparent conductive film, the facial and scalable double pulse electrodeposition method is used for coating of gold on the exposed surface of the AgNWs embedded in PS. The final transparent film with gold coating demonstrates a remarkable stability under harsh conditions including long exposure to UV light and nitric acid solution. After 100 min of UV/Ozone treatment, the increase in sheet resistance of the optimal PS-AgNW@Au sample is 15.6 times lower than the samples without gold coating. In addition, the change in sheet resistance after 2000 bending cycles in the optimal PS-AgNW@Au electrode is measured and it showed an increase of only 22% of its initial sheet resistance indicating its good flexibility. The proposed electrode performs an excellent chemical stability, good conductivity, transparency, and flexibility that makes it a potential candidate for various optoelectronic devices.

| S-EPMC10579339 | biostudies-literature

Phosphorus doped SnO<sub>2</sub> thin films for transparent conducting oxide applications: synthesis, optoelectronic properties and computational models.

Project description:Phosphorus doped tin(iv) oxide (P:SnO2) films have been synthesised by an aerosol assisted chemical vapour deposition route. Triethyl phosphate was used as the phosphorus dopant source. The phosphorus concentration in solution was found to be key to electrical properties, with concentrations between 0.25-0.5 mol% phosphorus giving the lowest resistivities of the deposited films. The conductivity of the films synthesised improved on doping SnO2 with phosphorus, with resistivity values of 7.27 × 10-4 Ω cm and sheet resistance values of 18.2 Ω □-1 achieved for the most conductive films. Phosphorus doping up to 1.0 mol% was shown to improve visible light transmission of the deposited films. The phosphorus doping also had a significant effect on film morphology, with varying microstructures achieved. The films were characterised by X-ray diffraction, scanning electron microscopy, UV/vis spectroscopy, Hall effect measurements and X-ray photoelectron spectroscopy. The data generated was used to build computational models of phosphorus as a dopant for SnO2, showing that the phosphorus acts as a shallow one-electron n-type donor allowing for good conductivities. Phosphorus does not suffer from self-compensation issues associated with other dopants, such as fluorine.

| S-EPMC6237145 | biostudies-literature

Photovoltaic activity of electrodes based on intact photosystem I electrodeposited on bare conducting glass.

Project description:We demonstrate photovoltaic activity of electrodes composed of fluorine-doped tin oxide (FTO) conducting glass and a multilayer of trimeric photosystem I (PSI) from cyanobacterium Synechocystis sp. PCC 6803 yielding, at open circuit potential (OCP) of + 100 mV (vs. SHE), internal quantum efficiency of (0.37 ± 0.11)% and photocurrent density of up to (0.5 ± 0.1) µA/cm2. The photocurrent measured for OCP is of cathodic nature meaning that preferentially the electrons are injected from the conducting layer of the FTO glass to the photooxidized PSI primary electron donor, P700+, and further transferred from the photoreduced final electron acceptor of PSI, Fb-, via ascorbate electrolyte to the counter electrode. This observation is consistent with preferential donor-side orientation of PSI on FTO imposed by applied electrodeposition. However, by applying high-positive bias (+ 620 mV) to the PSI-FTO electrode, exceeding redox midpoint potential of P700 (+ 450 mV), the photocurrent reverses its orientation and becomes anodic. This is explained by "switching off" the natural photoactivity of PSI particles (by the electrochemical oxidation of P700 to P700+) and "switching on" the anodic photocurrent from PSI antenna Chls prone to photooxidation at high potentials. The efficient control of the P700 redox state (P700 or P700+) by external bias applied to the PSI-FTO electrodes was evidenced by ultrafast transient absorption spectroscopy. The advantage of the presented system is its structural simplicity together with in situ-proven high intactness of the PSI particles.

| S-EPMC7113217 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data