Improving Water Stability of Soil Aggregates with Polyvinyl Alcohol as a Polymeric Binder
Ontology highlight
ABSTRACT:
SUBMITTER: Cao C
PROVIDER: S-EPMC11243888 | biostudies-literature | 2024 Jun
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Polyvinyl alcohol (PVA) porous carriers were prepared by means of ice templating of aqueous solutions containing of 90 kD and/or 16 kD PVA. The carriers were loaded with traces of a colored probe (methyl orange) to screen their release properties, once immersed in water. The carriers prepared from solutions containing 90 kD and 16 kD PVA resulted in intimate polymer mixtures, exhibiting physical properties that stand in between those of the bare 90 kD or 16 kD PVA end members. The freezing protocols employed were adapted to prepare carriers textured in the form of either monolithic scaffolds (directional constant freezing rate) or millimetric pellets (flash-freeze). Monolithic carriers remain stable in aqueous solution, and the probe release is governed by a swelling-diffusion mechanism. The kinetics of probe release can be tuned from minutes to hours by either increasing the total PVA content or the 90 kD-to-16 kD PVA ratio in the parent solution. In contrast, pellets (millimetric carriers) immersed in water release the probe on the scale of minutes, irrespective of the PVA content or composition. However, the PVA content and the 90 kD-to-16 kD PVA ratio dramatically affect the stability of the carriers. Depending on the formulation, these small carriers can develop swelling, erosion, or eventually massive dissolution.
| S-EPMC6641308 | biostudies-literature
Project description:Lateral flow assay (LFA) is an important point-of-care (POC) test platform due to the associated portability, on-site testing, and low cost for diagnosis of pathogen infections and disease biomarkers. However, compared to high-end analyzers in hospitals, LFA devices, in particular, paper- based LFA tests, fall short in accuracy. This study focuses on two ways to improve LFAs: (1) using cellulose fibers, rather than glass fibers for a sample pad, and (2) incorporating a one-step simple, facile, and low cost PVA dam into the LFA. Both strategies (cellulose fiber as a sample pad and water dissolvable PVA dam) contributed to delaying the controlled biomolecule's flow through the nitrocellulose membrane's capillary channels resulting in increased bio-recognition time, thus contributing to the enhancement of LFA sensitivity. PVA modified cellulose fiber-based LFA demonstrated 10 times higher sensitivity than the cellulose fiber-based unmodified LFA, whereas 2 times enhancement was obtained in the cellulose fiber-based sample pad LFA compared to the glass fiber-based sample pad LFA. Ultimately, 20 times increase in sensitivity was achieved in the modified LFA device. This study shows that PVA and eco-friendly cellulose fibers could be incorporated into other paper based POC testing devices for future development.Supplementary informationThe online version contains supplementary material available at 10.1007/s10570-021-04083-3.
| S-EPMC8286161 | biostudies-literature
Project description:This SuperSeries is composed of the SubSeries listed below.
2023-02-07 | GSE207743 | GEO
Project description:In this paper, polyvinyl alcohol/Ag-Metal-organic framework (PVA/Ag@MOF) and polyvinyl alcohol/chitosan (PVA/CS) were used as the inner and outer layers to successfully prepare a bilayer composite hydrogel for tissue engineering scaffold. The performance of bilayer hydrogels was evaluated. The outer layer (PVA/CS) has a uniform pore size distribution, good water retention, biocompatibility and cell adhesion ability. The inner layer (PVA/Ag@MOF) has good antibacterial activity and poor biocompatibility. PVA, PVA/0.1%Ag@MOF, PVA/0.5%Ag@MOF, and PVA/1.0%Ag@MOF show anti-microbial activity in ascending order. However, its use as an inner layer avoids direct contact with cells and prevents infection. The cell viability of all samples was above 90%, indicating that the bilayer hydrogel was non-toxic to A549 cells. The bilayer hydrogel scaffold combines the advantages of the inner and outer layers. In summary, this new bilayer composite is an ideal lung scaffold for tissue engineering.
| S-EPMC8468989 | biostudies-literature
Project description:We previously reported a polyvinyl alcohol-based mouse hematopoietic stem cell (HSC) culture protocol that efficiently expanded transplantable HSCs for at least a month ex vivo (Wilkinson et al., Nature 2019). Here, we investigated the molecular consequences of oxygen concentration on 28-day ex vivo HSC cultures using single cell RNA-seq
2023-02-07 | GSE207742 | GEO
Project description:Electrospinning is a versatile and low-cost technique widely used in the manufacture of nanofibrous polymeric membranes applied in different areas, especially in bioengineering. Hyaluronic acid (HA) is a biocompatible natural polymer, but it has rheological characteristics that make the electrospinning process difficult. Thus, its association with another polymer such as poly(vinyl alcohol) (PVA) is an alternative, as PVA has good rheological properties for electrospinning. Based on this, the aim of this work was to produce, by the conventional electrospinning method, cross-linked HA/PVA membranes free from organic solvent with a low degradation rate in PBS 7.4 solution after the photocrosslinking process and without using any organic solvent. The results showed that the electrospinning occurred effectively for all conditions tested, but the best result for complete cross-linking only occurred with 15 and 30% crosslinker, which was evidenced by infrared spectroscopy. The addition of crosslinker favored the stability of the electrospinning jet, especially for 30% crosslinker concentration. The membranes did not show cytotoxicity even after the cross-linking process, which indicates that the material has potential as a drug delivery device.
| S-EPMC9088204 | biostudies-literature
Project description:The pervaporation of binary alcohol/water mixtures across polymeric membranes is modeled by combining the Maxwell-Stefan (M-S) diffusion formulation with the Flory-Huggins (F-H) description of sorption equilibrium. The combined M-S/F-H model shows that the flux of each penetrant species is coupled to the driving force of its partner penetrant. Two types of coupling contributions can be distinguished: (i) coupling arising out of correlated motions of penetrants in the polymer matrix and (ii) thermodynamic coupling. The focus of this article is on the contribution of thermodynamic coupling, which is quantified by the set of coefficients , where a i , the activity of species i, is dependent on the volume fractions ϕ i ,ϕ j , of both penetrants in the polymeric membrane. Detailed analyses of published experimental data for pervaporation of ethanol/water feed mixtures of varying compositions in both hydrophobic (poly(dimethylsiloxane)) and hydrophilic (cellulose acetate, polyimide, and polyvinyl alcohol/polyacrylonitrile composite) membranes show that in all cases, the cross-coefficients Γ ij (i ≠ j) are negative and may attain large magnitudes in relation to the diagonal elements Γ ii . The net result is that the permeation fluxes of each penetrant are suppressed by its partner, resulting in mutual slowing down of permeation fluxes. If thermodynamic coupling effects are ignored, significantly higher fluxes are anticipated than those that are experimentally observed.
| S-EPMC6751729 | biostudies-literature
Project description:A carbon nanotube (CNT) integrated polymer composite membrane with a polyvinyl alcohol barrier layer has been prepared to separate oil from water for treatment of oil-containing waste water. The CNTs were synthesised using chemical vapour deposition, and a phase inversion method was employed for the blending of the CNTs in the polymer composite solution for casting of the membrane. Relative to the baseline polymer, an increase of 119% in the tensile strength, 77% in the Young's modulus and 258% in the toughness is seen for a concentration of 7.5% CNTs in the polymer composite. The permeate through the membrane shows oil concentrations below the acceptable 10 mg/L limit with an excellent throughput and oil rejection of over 95%.
| S-EPMC3605604 | biostudies-other
Project description:We previously reported a polyvinyl alcohol-based mouse hematopoietic stem cell (HSC) culture protocol that efficiently expanded transplantable HSCs for at least a month ex vivo (Wilkinson et al., Nature 2019). Here, we investigated the molecular consequences of oxygen concentration on 28-day ex vivo HSC cultures using bulk RNA-seq
2023-02-07 | GSE207740 | GEO
Project description:Nitrification inhibitor is essential for increasing the nitrogen utilization efficiency of agricultural plants, thus reducing environmental pollution and increasing crop yield. However, the easy volatilization and limited functional property is still the bottleneck of nitrification inhibitors. Herein, a novel water-soluble polymeric nitrification inhibitor was synthesized through the copolymerization of acrylamide and bio-based acrylic acid, which was synthesized from biomass-derived furfural, and the complexation of carboxyl groups and 3,4-dimethylpyrazole. The results showed that the nitrification inhibitor was an amorphous polymer product with a glass transition temperature of 146 °C and a thermal decomposition temperature of 176 °C, and the content of 3,4-dimethylpyrazole reached 2.81 wt%, which was 115% higher than our earlier product (1.31 wt%). The polymeric nitrification inhibitor can inhibit the activity of ammonia-oxidizing bacteria effectively, thus inhibiting the conversion of ammonium nitrogen to nitrate nitrogen and converting the insoluble phosphate into soluble and absorbable phosphate. By introducing a copolymer structure with a strong flocculation capacity, the polymeric nitrification inhibitor is further endowed with a soil-loosening function, which can increase the porosity of soil to improve the soil environment. Therefore, the nitrification inhibitor can be used in water-soluble and liquid fertilizers, as well as in high tower melting granulated compound fertilizers.
| S-EPMC10780483 | biostudies-literature