Dataset Information

3D Bioprinted Hydrogel Microfluidic Devices for Parallel Drug Screening.

ABSTRACT: Conventional high-throughput screening (HTS) platforms suffer from the need for large cell volumes, high reagent consumption, significant assembly cost, and handling efforts. The assembly of three-dimensional (3D) bioprinted hydrogel-based microfluidic chips within platforms can address these problems. We present a continuous and seamless manufacturing approach to create a bioprinted microfluidic chips with a circular pattern scalable toward HTS platforms. Digital light processing 3D bioprinting is used to tune the local permeability of our chip, made of polyethylene glycol diacrylate and cell-laden gelatin methacryloyl, for creating predefined gradients of biochemical properties. We measured the flow-induced physical characteristics, the mass transport of drug agents, and the biological features of the proposed chip. We measured reactive oxygen species from the encapsulated cells through an integrated process and showed the capacity of the hydrogel-based chip for creating drug/agent gradients. This work introduces a chip design based on a hydrogel that can be changed and could be used for modern HTS platforms such as in vitro organoids.

SUBMITTER: Bhusal A

PROVIDER: S-EPMC11375967 | biostudies-literature | 2022 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

3D Bioprinted Hydrogel Microfluidic Devices for Parallel Drug Screening.

Bhusal Anant A Dogan Elvan E Nieto Daniel D Mousavi Shaegh Seyed Ali SA Cecen Berivan B Miri Amir K AK

ACS applied bio materials 20220829

Conventional high-throughput screening (HTS) platforms suffer from the need for large cell volumes, high reagent consumption, significant assembly cost, and handling efforts. The assembly of three-dimensional (3D) bioprinted hydrogel-based microfluidic chips within platforms can address these problems. We present a continuous and seamless manufacturing approach to create a bioprinted microfluidic chips with a circular pattern scalable toward HTS platforms. Digital light processing 3D bioprinting ...[more]

PMID: 36037061

Similar Datasets

Project description:Inertial microfluidics has been broadly investigated, resulting in the development of various applications, mainly for particle or cell separation. Lateral migrations of these particles within a microchannel strictly depend on the channel design and its cross-section. Nonetheless, the fabrication of these microchannels is a continuous challenging issue for the microfluidic community, where the most studied channel cross-sections are limited to only rectangular and more recently trapezoidal microchannels. As a result, a huge amount of potential remains intact for other geometries with cross-sections difficult to fabricate with standard microfabrication techniques. In this study, by leveraging on benefits of additive manufacturing, we have proposed a new method for the fabrication of inertial microfluidic devices. In our proposed workflow, parts are first printed via a high-resolution DLP/SLA 3D printer and then bonded to a transparent PMMA sheet using a double-coated pressure-sensitive adhesive tape. Using this method, we have fabricated and tested a plethora of existing inertial microfluidic devices, whether in a single or multiplexed manner, such as straight, spiral, serpentine, curvilinear, and contraction-expansion arrays. Our characterizations using both particles and cells revealed that the produced chips could withstand a pressure up to 150?psi with minimum interference of the tape to the total functionality of the device and viability of cells. As a showcase of the versatility of our method, we have proposed a new spiral microchannel with right-angled triangular cross-section which is technically impossible to fabricate using the standard lithography. We are of the opinion that the method proposed in this study will open the door for more complex geometries with the bespoke passive internal flow. Furthermore, the proposed fabrication workflow can be adopted at the production level, enabling large-scale manufacturing of inertial microfluidic devices.

Dataset Information

3D Bioprinted Hydrogel Microfluidic Devices for Parallel Drug Screening.

Publications

3D Bioprinted Hydrogel Microfluidic Devices for Parallel Drug Screening.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets