Browse
Submit Data
Databases
API
Help

Dataset Information

36 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Rapid determination of rifampin resistance in clinical isolates of Mycobacterium tuberculosis by real-time PCR.

ABSTRACT: Real-time PCR was used to determine rifampin resistance in clinical isolates of Mycobacterium tuberculosis. Ninety-six rifampin-resistant isolates and 23 rifampin-susceptible isolates were included in the study. A 305-bp region covering the 81-bp "rifampin resistance-determining region" of rpoB was amplified. Two hybridization probe pairs that covered the most frequent mutation sites in rpoB, codon regions 526 to 531 and 513 to 516, were used. The results obtained by real-time PCR were compared to those obtained by the proportion method. For detection of rifampin resistance, the real-time PCR assay yielded a sensitivity of 92.7% and a specificity of 100%. Real-time PCR is a very rapid method, and it can be especially helpful for the reporting of resistant clinical isolates in a very short period of time.

SUBMITTER: Kocagoz T

PROVIDER: S-EPMC1317190 | biostudies-literature | 2005 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Rapid determination of rifampin resistance in clinical isolates of Mycobacterium tuberculosis by real-time PCR.

Kocagoz Tanil T Saribas Zeynep Z Alp Alpaslan A

Journal of clinical microbiology 20051201 12

Real-time PCR was used to determine rifampin resistance in clinical isolates of Mycobacterium tuberculosis. Ninety-six rifampin-resistant isolates and 23 rifampin-susceptible isolates were included in the study. A 305-bp region covering the 81-bp "rifampin resistance-determining region" of rpoB was amplified. Two hybridization probe pairs that covered the most frequent mutation sites in rpoB, codon regions 526 to 531 and 513 to 516, were used. The results obtained by real-time PCR were compared ...[more]

PMID: 16333091

Similar Datasets

Use of real-time PCR and fluorimetry for rapid detection of rifampin and isoniazid resistance-associated mutations in Mycobacterium tuberculosis.

Project description:Very fast amplification of DNA in small volumes can be continuously monitored with a rapid cycler that incorporates fluorimetric detection. Primers were designed to amplify a 157-bp fragment of the rpoB gene spanning codons 526 and 531 and a 209-bp fragment of the katG gene spanning codon 315 of Mycobacterium tuberculosis. Most mutations associated with resistance to rifampin (RMP) and isoniazid (INH) in clinical isolates occur in these codons. Two pairs of hybridization probes were synthesized; one in each pair was 3' labeled with fluorescein and hybridized upstream of the codon with the mutation; the other two probes were 5' labeled with LightCycler-Red 640. Each pair of probes recognized adjacent sequences in the amplicon. After DNA amplification was finished by using a LightCycler, the temperature at which the Red 640 probe melted from the product was determined in a 3-min melt program. Twenty M. tuberculosis clinical isolates susceptible to streptomycin, INH, RMP, and ethambutol and 36 antibiotic-resistant clinical M. tuberculosis isolates (16 resistant to RMP, 16 to INH, and 4 to both antimicrobial agents) were amplified, and the presence of mutations was determined using single-strand conformation polymorphism analysis, the LiQor automated sequencer, and the LightCycler system. Concordant results were obtained in all cases. Within 30 min, the LightCycler method correctly genotyped all the strains without the need of any post-PCR sample manipulation. Overall, this pilot study demonstrated that real-time PCR coupled to fluorescence detection is the fastest available method for the detection of RMP and INH resistance-associated mutations in M. tuberculosis clinical isolates.

| S-EPMC87353 | biostudies-literature

Locked Nucleic Acid Probe-Based Real-Time PCR Assay for the Rapid Detection of Rifampin-Resistant Mycobacterium tuberculosis.

Project description:Drug-resistant Mycobacterium tuberculosis can be rapidly diagnosed through nucleic acid amplification techniques by analyzing the variations in the associated gene sequences. In the present study, a locked nucleic acid (LNA) probe-based real-time PCR assay was developed to identify the mutations in the rpoB gene associated with rifampin (RFP) resistance in M. tuberculosis. Six LNA probes with the discrimination capability of one-base mismatch were designed to monitor the 23 most frequent rpoB mutations. The target mutations were identified using the probes in a "probe dropout" manner (quantification cycle = 0); thus, the proposed technique exhibited superiority in mutation detection. The LNA probe-based real-time PCR assay was developed in a two-tube format with three LNA probes and one internal amplification control probe in each tube. The assay showed excellent specificity to M. tuberculosis with or without RFP resistance by evaluating 12 strains of common non-tuberculosis mycobacteria. The limit of detection of M. tuberculosis was 10 genomic equivalents (GE)/reaction by further introducing a nested PCR method. In a blind validation of 154 clinical mycobacterium isolates, 142/142 (100%) were correctly detected through the assay. Of these isolates, 88/88 (100%) were determined as RFP susceptible and 52/54 (96.3%) were characterized as RFP resistant. Two unrecognized RFP-resistant strains were sequenced and were found to contain mutations outside the range of the 23 mutation targets. In conclusion, this study established a sensitive, accurate, and low-cost LNA probe-based assay suitable for a four-multiplexing real-time PCR instrument. The proposed method can be used to diagnose RFP-resistant tuberculosis in clinical laboratories.

| S-EPMC4657947 | biostudies-literature

Rapid detection of isoniazid resistance in Mycobacterium tuberculosis isolates by use of real-time-PCR-based melting curve analysis.

Project description:The MeltPro TB/INH assay, recently approved by the Chinese Food and Drug Administration, is a closed-tube, dual-color, melting curve analysis-based, real-time PCR test specially designed to detect 30 isoniazid (INH) resistance mutations in katG position 315 (katG 315), the inhA promoter (positions -17 to -8), inhA position 94, and the ahpC promoter (positions -44 to -30 and -15 to 3) of Mycobacterium tuberculosis. Here we evaluated both the analytical performance and clinical performance of this assay. Analytical studies with corresponding panels demonstrated that the accuracy for detection of different mutation types (10 wild-type samples and 12 mutant type samples), the limit of detection (2×10(3) to 2×10(4) bacilli/ml), reproducibility (standard deviation [SD], <0.4°C), and the lowest heteroresistance level (40%) all met the parameters preset by the kit. The assay could be run on five types of real-time PCR machines, with the shortest running time (105 min) obtained with the LightCycler 480 II. Clinical studies enrolled 1,096 clinical isolates collected from three geographically different tuberculosis centers, including 437 INH-resistant isolates and 659 INH-susceptible isolates characterized by traditional drug susceptibility testing on Löwenstein-Jensen solid medium. The clinical sensitivity and specificity of the MeltPro TB/INH assay were 90.8% and 96.4%, respectively. DNA sequencing analysis showed that, except for the 5 mutants outside the detection range of the MeltPro assay, a concordance rate between the two methods of 99.1% (457/461) was obtained. Among the 26 mutation types detected, katG S315T (AGC?ACC), inhA -15C?T, katG S315N (AGC?AAC), and ahpC promoter -10C?T accounted for more than 90%. Overall, the MeltPro TB/INH assay represents a reliable and rapid tool for the detection of INH resistance in clinical isolates.

| S-EPMC3993622 | biostudies-literature

Correction: Locked Nucleic Acid Probe-Based Real-Time PCR Assay for the Rapid Detection of Rifampin-Resistant Mycobacterium tuberculosis.

Project description:[This corrects the article DOI: 10.1371/journal.pone.0143444.].

| S-EPMC4894557 | biostudies-literature

Real-time PCR assay for rapid detection of epidemiologically and clinically significant Mycobacterium tuberculosis Beijing genotype isolates.

Project description:Mycobacterium tuberculosis Beijing genotype strains are rapidly disseminating, frequently hypervirulent, and multidrug resistant. Here, we describe a method for their rapid detection by real-time PCR that targets the specific IS6110 insertion in the dnaA-dnaN genome region. The method was evaluated with a geographically and genetically diverse collection representing areas in East Asia and the former Soviet Union in which the Beijing genotype is endemic and epidemic (i.e., major foci of its global propagation) and with clinical specimens.

| S-EPMC3993684 | biostudies-literature

Rapid detection of Mycobacterium tuberculosis Beijing genotype strains by real-time PCR.

Project description:Mycobacterium tuberculosis strains of the Beijing genotype were first identified in China and neighboring countries and have attracted special attention due to their global emergence and association with drug resistance. To further analyze the spread and special characteristics of Beijing genotype strains, accurate, rapid and sensitive methods that overcome the drawbacks of the classical methods such as IS6110 DNA fingerprinting or spoligotyping for the identification of strains of this genotype are needed. Based on the nucleotide sequences of M. tuberculosis SAWC0780 and H37Rv, primers and fluorogenic 5' nuclease (TaqMan) probes for real-time PCR assays specific for Beijing and non-Beijing strains, respectively, were designed. The detection limits for the real-time PCR assays were about 5 and 10 copies of chromosomal DNA, respectively. In mixtures of Beijing and non-Beijing DNA, a multiplex assay was able to detect (i) one copy of Beijing DNA in approximately 1,000 copies of non-Beijing DNA and (ii) one copy of non-Beijing DNA in approximately 2,000 copies of Beijing DNA. In a blinded analysis of a collection of 103 multidrug-resistant strains isolated in Germany in 2001, all 62 Beijing and all 41 non-Beijing strains were correctly identified. In conclusion, the real-time assay allows for the rapid and specific detection of Beijing and non-Beijing strains. The major advantages of this test in comparison to other methods used for the identification of Beijing strains are its simplicity and sensitivity and the fact that amplification and detection occur within one reaction tube.

| S-EPMC1392668 | biostudies-literature

Fast test for assessing the susceptibility of Mycobacterium tuberculosis to isoniazid and rifampin by real-time PCR.

Project description:Mycobacterium tuberculosis is the bacterium that causes tuberculosis (TB), a leading cause of death from infectious disease worldwide. Rapid diagnosis of resistant strains is important for the control of TB. Real-time polymerase chain reaction (RT-PCR) assays may detect all of the mutations that occur in the M. tuberculosis 81-bp core region of the rpoB gene, which is responsible for resistance to rifampin (RIF) and codon 315 of the katG gene and the inhA ribosomal binding site, which are responsible for isoniazid (INH). The goal of this study was to assess the performance of RT-PCR compared to traditional culture-based methods for determining the drug susceptibility of M. tuberculosis. BACTEC TM MGIT TM 960 was used as the gold standard method for phenotypic drug susceptibility testing. Susceptibilities to INH and RIF were also determined by genotyping of katG, inhA and rpoB genes. RT-PCR based on molecular beacons probes was used to detect specific point mutations associated with resistance. The sensitivities of RT-PCR in detecting INH resistance using katG and inhA targets individually were 55% and 25%, respectively and 73% when combined. The sensitivity of the RT-PCR assay in detecting RIF resistance was 99%. The median time to complete the RT-PCR assay was three-four hours. The specificities for tests were both 100%. Our results confirm that RT-PCR can detect INH and RIF resistance in less than four hours with high sensitivity.

| S-EPMC4643165 | biostudies-literature

Detection and differentiation of Mycobacterium tuberculosis and nontuberculous mycobacterial isolates by real-time PCR.

Project description:Mycobacteria cause a variety of illnesses that differ in severity and public health implications. The differentiation of Mycobacterium tuberculosis from nontuberculous mycobacteria (NTM) is of primary importance for infection control and choice of antimicrobial therapy. Despite advances in molecular diagnostics, the ability to rapidly diagnose M. tuberculosis infections by PCR is still inadequate, largely because of the possibility of false-negative reactions. We designed and validated a real-time PCR for mycobacteria by using the LightCycler system with 18 reference strains and 168 clinical mycobacterial isolates. All clinically significant mycobacteria were detected; the mean melting temperatures (with 99.9% confidence intervals [99.9% CI] in parentheses) for the different mycobacteria were as follows: M. tuberculosis, 64.35 degrees C (63.27 to 65.42 degrees C); M. kansasii, 59.20 degrees C (58.07 to 60.33 degrees C); M. avium, 57.82 degrees C (57.05 to 58.60 degrees C); M. intracellulare, 54.46 degrees C (53.69 to 55.23 degrees C); M. marinum, 58.91 degrees C (58.28 to 59.55 degrees C); rapidly growing mycobacteria, 53.09 degrees C (50.97 to 55.20 degrees C) or 43.19 degrees C (42.19 to 44.49 degrees C). This real-time PCR assay with melting curve analysis consistently accurately detected and differentiated M. tuberculosis from NTM. Detection of an NTM helps ensure that the negative result for M. tuberculosis is a true negative. The specific melting temperature also provides a suggestion of the identity of the NTM present, when the most commonly encountered mycobacterial species are considered. In a parallel comparison, both the LightCycler assay and the COBAS Amplicor M. tuberculosis assay correctly categorized 48 of 50 specimens that were proven by culture to contain M. tuberculosis, and the LightCycler assay correctly characterized 3 of 3 specimens that contained NTM.

| S-EPMC262464 | biostudies-literature

Rapid detection of isoniazid, rifampin, and ofloxacin resistance in Mycobacterium tuberculosis clinical isolates using high-resolution melting analysis.

Project description:A high-resolution melting analysis (HRMA) assay was developed to detect isoniazid, rifampin, and ofloxacin resistance in Mycobacterium tuberculosis by targeting resistance-associated mutations in the katG, mabA-inhA promoter, rpoB, and gyrA genes. A set of 28 (17 drug-resistant and 11 fully susceptible) clinical M. tuberculosis isolates was selected for development and evaluation of HRMA. PCR amplicons from the katG, mabA-inhA promoter, rpoB, and gyrA genes of all 28 isolates were sequenced. HRMA results matched well with 18 mutations, identified by sequencing, in 17 drug-resistant isolates and the absence of mutations in 11 susceptible isolates. Among 87 additional isolates with known resistance phenotypes, HRMA identified katG and/or mabA-inhA promoter mutations in 66 of 69 (95.7%) isoniazid-resistant isolates, rpoB mutations in 51 of 54 (94.4%) rifampin-resistant isolates, and gyrA mutations in all of 41 (100%) ofloxacin-resistant isolates. All mutations within the HRMA primer target regions were detected as variant HRMA profiles. The corresponding specificities were 97.8%, 100%, and 98.6%, respectively. Most false-positive results were due to synonymous mutations, which did not affect susceptibility. HRMA is a rapid, sensitive method for detection of drug resistance in M. tuberculosis which could be used routinely for screening isolates in countries with a high prevalence of tuberculosis and drug resistance or in individual isolates when drug resistance is suspected.

| S-EPMC3187326 | biostudies-literature

High-resolution melting curve analysis for rapid detection of rifampin and isoniazid resistance in Mycobacterium tuberculosis clinical isolates.

Project description:We evaluated high-resolution melting (HRM) curve analysis as a tool for detecting rifampin (RIF) and isoniazid (INH) resistance in Mycobacterium tuberculosis in an accurate, affordable, and rapid manner. Two hundred seventeen M. tuberculosis clinical isolates of known resistance phenotype were used. Twenty-nine known rpoB mutant DNAs, including rare mutations, were also included. Four pairs of primers were designed: rpoB-F/R (for codons 516 to 539 of rpoB), rpoB-516F/R (for codons 508 to 536 of rpoB), katG-F/R (for the codon 315 region of katG), and inhA-F/R (for the nucleotide substitution of C to T at position -15 of inhA). An HRM curve was generated for each isolate after real-time PCR differentiated the mutant from the wild-type strains. DNA sequencing of the target regions was performed to confirm the results of the HRM curve analysis. All but one of the 73 RIF-resistant (RIF-R) strains and all 124 RIF-susceptible (RIF-S) isolates were correctly identified by HRM curve analysis of rpoB. Twenty-seven of 29 known rpoB mutants were detected. In HRM curve analysis of katG and inhA, 90 INH-R strains that harbored katG or inhA mutations, or both, and all INH-S strains were correctly identified. Ten phenotypically INH-R strains not harboring katG or inhA mutations were not detected. The HRM curve analysis will be a useful method for detection of RIF and INH resistance in M. tuberculosis in a rapid, accurate, simple, and cost-effective manner.

| S-EPMC3020879 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data