Dataset Information

On the mechanism of nitrosoarene-alkyne cycloaddition.

ABSTRACT: The thermal reaction between nitrosoarenes and alkynes produces N-hydroxyindoles as the major products. The mechanism of these novel reactions has been probed using a combination of experimental and computational methods. The reaction of nitrosobenzene (NB) with an excess of phenyl acetylene (PA) is determined to be first order in each reactant in benzene at 75 degrees C. The reaction rates have been determined for reactions between phenyl acetylene with a set of p-substituted nitrosoarenes, 4-X-C(6)H(4)NO, and of 4-O(2)N-C(6)H(4)NO with a set of p-substituted arylalkynes, 4-Y-C(6)H(4)C[triple bond]CH. The former reactions are accelerated by electron-withdrawing X groups (rho = +0.4), while the latter are faster with electron-donating Y groups (rho = -0.9). The kinetic isotope effect for the reaction of C(6)H(5)NO/C(6)D(5)NO with PhC[triple bond]CH is found to be 1.1 (+/-0.1) while that between PhC[triple bond]CH/PhC[triple bond]CD with PhNO is also 1.1 (+/-0.1). The reaction between nitrosobenzene and the radical clock probe cyclopropylacetylene affords 3-cyclopropyl indole in low yield. In addition to 3-carbomethoxy-N-hydroxyindole, the reaction between PA and o-carbomethoxy-nitrosobenzene also affords a tricyclic indole derivative, 3, likely derived from trapping of an intermediate indoline nitrone with PA and subsequent rearrangement. Computational studies of the reaction mechanism were carried out with density functional theory at the (U)B3LYP/6-31+G(d) level. The lowest energy pathway of the reaction of PhNO with alkynes was found to be stepwise; the N-C bond between nitrosoarene and acetylene is formed first, the resulting vinyl diradical undergoes cis-trans isomerization, and then the C-C bond forms. Conjugating substituents Z on the alkyne, Z-C[triple bond]CH, lower the calculated (and observed) activation barrier, Z = -H (19 kcal/mol), -Ph (15.8 kcal/mol), and -C(O)H (13 kcal/mol). The regioselectivity of the reaction, with formation of the 3-substituted indole, was reproduced by the calculations of PhNO + PhC[triple bond]CH; the rate-limiting step for formation of the 2-substituted indole is higher in energy by 11.6 kcal/mol. The effects of -NO(2), -CN, -Cl, -Br, -Me, and -OMe substituents were computed for the reactions of p-X-C(6)H(4)NO with PhC[triple bond]CH and of PhNO and/or p-NO(2)-C(6)H(4)NO with p-Y-C(6)H(4)C[triple bond]CH. The activation energies for the set of p-X-C(6)H(4)NO vary by 4.3 kcal/mol and follow the trend found experimentally, with electron-withdrawing X groups accelerating the reactions. The range of barriers for the p-Y-C(6)H(4)C[triple bond]CH reactions is smaller, about 1.5 and 1.8 kcal/mol in the cases of PhNO and p-NO(2)-PhNO, respectively. In agreement with the experiments, electron-donating Y groups on the alkyne accelerate the reactions with p-NO(2)-C(6)H(4)NO, while both ED and EW groups are predicted to facilitate the reaction. The calculated kinetic isotope effect for the reaction of C(6)H(5)NO/C(6)D(5)NO with PhC[triple bond]CH is negligible (as found experimentally) while that for PhC[triple bond]CH/PhC[triple bond]CD with PhNO (0.7) differs somewhat from the experiment (1.1). Taken together the experimental and computational results point to the operation of a stepwise diradical cycloaddition, with rate-limiting N-C bond formation and rapid C-C connection to form a bicyclic cyclohexadienyl-N-oxyl diradical, followed by fast tautomerization to the N-hydroxyindole product.

SUBMITTER: Penoni A

PROVIDER: S-EPMC2646788 | biostudies-literature | 2009 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

On the mechanism of nitrosoarene-alkyne cycloaddition.

Penoni Andrea A Palmisano Giovanni G Zhao Yi-Lei YL Houk Kendall N KN Volkman Jerome J Nicholas Kenneth M KM

Journal of the American Chemical Society 20090101 2

The thermal reaction between nitrosoarenes and alkynes produces N-hydroxyindoles as the major products. The mechanism of these novel reactions has been probed using a combination of experimental and computational methods. The reaction of nitrosobenzene (NB) with an excess of phenyl acetylene (PA) is determined to be first order in each reactant in benzene at 75 degrees C. The reaction rates have been determined for reactions between phenyl acetylene with a set of p-substituted nitrosoarenes, 4-X ...[more]

PMID: 19093864

Similar Datasets

Project description:A mechanistic model is formulated to account for the high reactivity of chelating azides (organic azides capable of chelation-assisted metal coordination at the alkylated azido nitrogen position) and copper(II) acetate (Cu(OAc)(2)) in copper(II)-mediated azide-alkyne cycloaddition (AAC) reactions. Fluorescence and (1)H NMR assays are developed for monitoring the reaction progress in two different solvents, methanol and acetonitrile. Solvent kinetic isotopic effect and premixing experiments give credence to the proposed different induction reactions for converting copper(II) to catalytic copper(I) species in methanol (methanol oxidation) and acetonitrile (alkyne oxidative homocoupling), respectively. The kinetic orders of individual components in a chelation-assisted, copper(II)-accelerated AAC reaction are determined in both methanol and acetonitrile. Key conclusions resulting from the kinetic studies include (1) the interaction between copper ion (either in +1 or +2 oxidation state) and a chelating azide occurs in a fast, pre-equilibrium step prior to the formation of the in-cycle copper(I)-acetylide, (2) alkyne deprotonation is involved in several kinetically significant steps, and (3) consistent with prior experimental and computational results by other groups, two copper centers are involved in the catalysis. The X-ray crystal structures of chelating azides with Cu(OAc)(2) suggest a mechanistic synergy between alkyne oxidative homocoupling and copper(II)-accelerated AAC reactions, in which both a bimetallic catalytic pathway and a base are involved. The different roles of the two copper centers (a Lewis acid to enhance the electrophilicity of the azido group and a two-electron reducing agent in oxidative metallacycle formation, respectively) in the proposed catalytic cycle suggest that a mixed valency (+2 and +1) dinuclear copper species be a highly efficient catalyst. This proposition is supported by the higher activity of the partially reduced Cu(OAc)(2) in mediating a 2-picolylazide-involved AAC reaction than the fully reduced Cu(OAc)(2). Finally, the discontinuous kinetic behavior that has been observed by us and others in copper(I/II)-mediated AAC reactions is explained by the likely catalyst disintegration during the course of a relatively slow reaction. Complementing the prior mechanistic conclusions drawn by other investigators, which primarily focus on the copper(I)/alkyne interactions, we emphasize the kinetic significance of copper(I/II)/azide interaction. This work not only provides a mechanism accounting for the fast Cu(OAc)(2)-mediated AAC reactions involving chelating azides, which has apparent practical implications, but suggests the significance of mixed-valency dinuclear copper species in catalytic reactions where two copper centers carry different functions.

Project description:O-linked ?-N-acetylglucosamine (O-GlcNAc) is emerging as an essential protein post-translational modification in a range of organisms. It is involved in various cellular processes such as nutrient sensing, protein degradation, gene expression, and is associated with many human diseases. Despite its importance, identifying O-GlcNAcylated proteins is a major challenge in proteomics. Here, using peracetylated N-azidoacetylglucosamine (Ac4 GlcNAz) as a bioorthogonal chemical handle, we described a gel-based mass spectrometry method for the identification of proteins with O-GlcNAc modification in A549 cells. In addition, we made a labeling efficiency comparison between two modes of azide-alkyne bioorthogonal reactions in click chemistry: copper-catalyzed azide-alkyne cycloaddition (CuAAC) with Biotin-Diazo-Alkyne and stain-promoted azide-alkyne cycloaddition (SPAAC) with Biotin-DIBO-Alkyne. After conjugation with click chemistry in vitro and enrichment via streptavidin resin, proteins with O-GlcNAc modification were separated by SDS-PAGE and identified with mass spectrometry. Proteomics data analysis revealed that 229 putative O-GlcNAc modified proteins were identified with Biotin-Diazo-Alkyne conjugated sample and 188 proteins with Biotin-DIBO-Alkyne conjugated sample, among which 114 proteins were overlapping. Interestingly, 74 proteins identified from Biotin-Diazo-Alkyne conjugates and 46 verified proteins from Biotin-DIBO-Alkyne conjugates could be found in the O-GlcNAc modified proteins database dbOGAP (http://cbsb.lombardi.georgetown.edu/hulab/OGAP.html). These results suggested that CuAAC with Biotin-Diazo-Alkyne represented a more powerful method in proteomics with higher protein identification and better accuracy compared to SPAAC. The proteomics credibility was also confirmed by the molecular function and cell component gene ontology (GO). Together, the method we reported here combining metabolic labeling, click chemistry, affinity-based enrichment, SDS-PAGE separation, and mass spectrometry, would be adaptable for other post-translationally modified proteins in proteomics.

Project description:We described in a previous communication a variant of the popular Cu(I)-catalyzed azide-alkyne cycloaddition (AAC) process where 5 mol % of Cu(OAc)(2) in the absence of any added reducing agent is sufficient to enable the reaction. 2-Picolylazide (1) and 2-azidomethylquinoline (2) were found to be by far the most reactive carbon azide substrates that convert to 1,2,3-triazoles in as short as a few minutes under the discovered conditions. We hypothesized that the abilities of 1 and 2 to chelate Cu(II) contribute significantly to the observed high reaction rates. The current work examines the effect of auxiliary ligands near the azido group other than pyridyl for Cu(II) on the efficiency of the Cu(OAc)(2)-accelerated AAC reaction. The carbon azides capable of binding to the catalytic copper center at the alkylated azido nitrogen in a chelatable fashion were indeed shown to be superior substrates under the reported conditions. The chelation between carbon azide 11 and Cu(II) was demonstrated in an X-ray single-crystal structure. In a limited set of examples, the ligand tris(benzyltriazolylmethyl)amine (TBTA), developed by Fokin et al. for assisting the original Cu(I)-catalyzed AAC reactions, also dramatically enhances the Cu(OAc)(2)-accelerated AAC reactions involving nonchelating azides. This observation leads to the hypothesis of an additional effect of chelating azides on the efficiencies of Cu(OAc)(2)-accelerated AAC reactions, which is to facilitate the rapid reduction of Cu(II) to highly catalytic Cu(I) species. Mechanistic studies on the AAC reactions with particular emphasis on the role of carbon azide/copper interactions will be conducted based on the observations reported in this work. Finally, the immediate utility of the product 1,2,3-triazole molecules derived from chelating azides as multidentate metal coordination ligands is demonstrated. The resulting triazolyl-containing ligands are expected to bind with transition metal ions via the N(2) nitrogen of the 1,2,3-triazolyl group to form nonplanar coordination rings. The Cu(II) complexes of bidentate T1 and tetradentate T6 and the Zn(II) complex of T6 were characterized by X-ray crystallography. The structure of [Cu(T1)(2)(H(2)O)(2)](ClO(4))(2) reveals the interesting synergistic effect of hydrogen bonding, π-π stacking interactions, and metal coordination in forming a one-dimensional supramolecular construct in the solid state. The tetradentate coordination mode of T6 may be incorporated into designs of new molecule sensors and organometallic catalysts.

Dataset Information

On the mechanism of nitrosoarene-alkyne cycloaddition.

Publications

On the mechanism of nitrosoarene-alkyne cycloaddition.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets