Dataset Information

Effect of micrometer-scale roughness of the surface of Ti6Al4V pedicle screws in vitro and in vivo.

ABSTRACT:

Background

Titanium implants that have been grit-blasted and acid-etched to produce a rough microtopography support more bone integration than do smooth-surfaced implants. In vitro studies have suggested that this is due to a stimulatory effect on osteoblasts. It is not known if grit-blasted and acid-etched Ti6Al4V implants also stimulate osteoblasts and increase bone formation clinically. In this study, we examined the effects of micrometer-scale-structured Ti6Al4V surfaces on cell responses in vitro and on tissue responses in vivo.

Methods

Ti6Al4V disks were either machined to produce smooth surfaces with an average roughness (Ra) of 0.2 microm or grit-blasted, resulting in an Ra of 2.0, 3.0, or 3.3 microm. Human osteoblast-like cells were cultured on the disks and on tissue culture polystyrene. The cell number, markers of osteoblast differentiation, and levels of local factors in the conditioned media were determined at confluence. In addition, Ti6Al4V pedicle screws with smooth or rough surfaces were implanted into the L4 and L5 vertebrae of fifteen two-year-old sheep. Osteointegration was evaluated at twelve weeks with histomorphometry and on the basis of removal torque.

Results

The cell numbers on the Ti6Al4V surfaces were lower than those on the tissue culture polystyrene; the effect was greatest on the roughest surface. The alkaline-phosphatase-specific activity of cell lysates was decreased in a surface-dependent manner, whereas osteocalcin, prostaglandin E(2), transforming growth factor-beta1, and osteoprotegerin levels were higher on the rough surfaces. Bone-implant contact was greater around the rough-surfaced Ti6Al4V screws, and the torque needed to remove the rough screws from the bone was more than twice that required to remove the smooth screws.

Conclusions

Increased micrometer-scale surface roughness increases osteoblast differentiation and local factor production in vitro, which may contribute to increased bone formation and osteointegration in vivo. There was a correlation between in vitro and in vivo observations, indicating that the use of screws with rough surfaces will result in better bone-implant contact and implant stability.

SUBMITTER: Schwartz Z

PROVIDER: S-EPMC2663328 | biostudies-literature | 2008 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Effect of micrometer-scale roughness of the surface of Ti6Al4V pedicle screws in vitro and in vivo.

Schwartz Zvi Z Raz Perry P Zhao Ge G Barak Yael Y Tauber Michael M Yao Hai H Boyan Barbara D BD

The Journal of bone and joint surgery. American volume 20081101 11

<h4>Background</h4>Titanium implants that have been grit-blasted and acid-etched to produce a rough microtopography support more bone integration than do smooth-surfaced implants. In vitro studies have suggested that this is due to a stimulatory effect on osteoblasts. It is not known if grit-blasted and acid-etched Ti6Al4V implants also stimulate osteoblasts and increase bone formation clinically. In this study, we examined the effects of micrometer-scale-structured Ti6Al4V surfaces on cell resp ...[more]

PMID: 18978418

Similar Datasets

Project description:Pedicles are often broken when screws are inserted into hard pedicles with small diameters or when the diameter of the screw itself is inadequate. However, there is a lack of biomechanical literature that addresses screw loosening as a result of broken pedicles or the resulting salvage of those screws. We performed a novel in vitro study to compare the pullout strength of screws between intact pedicles and two different types of broken pedicles; strategies to prevent screw loosening were also compared. Thirty L4 Sawbones were designed to represent intact pedicles, semi-pedicles, and nonpedicles and were prepared for screw insertion. Three sizes of polyaxial screws (diameter × length dimensions of 6.0 mm × 45 mm, 6.0 mm × 50 mm and 6.5 mm × 45 mm) were independently and randomly distributed into the intact-pedicle group (IP group, n = 30), the semi-pedicle group (SP group, n = 15), or the nonpedicle group (NP group, n = 15). The experiments were conducted across a minimum of five trials for each of the chosen screw sizes. We then analyzed the results of the imaging, pullout testing, and embedded bone volume. Any fractures or defects of the vertebrae caused by screw insertion were excluded from the study. The appropriate screw trajectory and insertional depth were confirmed using axial and sagittal X-ray imaging prior to screw pullout testing. A pullout strength of only 41% to 45% for the SP group and 29% to 39% for the NP group was retained following a broken pedicle. The use of longer or larger-diameter screws appears to be an effective salvaging procedure for the NP group (p < 0.05). The embedded bone volume percentage analysis indicated that, compared to the IP group, 68% to 76% of effective bone embedded into the screw threads in the SP group, and 58% to 65% in the NP group. There was no direct correlation between the pullout strength and the embedded bone volume; however, less effective embedded bone volume was associated with lower pullout strength. This study describes the evolution of the well-established screw pullout test being applied to the broken pedicle Sawbone testing model. The pedicle plays an important role in determining the pullout strength of a screw. However, a salvage procedure that utilizes a longer or larger-diameter screw might be a reliable clinical approach to address broken pedicles.

Project description:IntroductionTransforaminal lumbar interbody fusion (TLIF) has been widely used in the treatment of lumbar degenerative disc disorders and shows favourable clinical results. Recently, cortical bone trajectory (CBT) has become a new trajectory for screw insertion in the lumbar spine. Several biomechanical studies have demonstrated that the CBT technique achieves screw purchase and strength greater than the traditional method. Currently, the available data on the clinical effectiveness of the two performed surgeries, TLIF with CBT screws (CBT-TLIF) and TLIF with traditional pedicle screws (PS-TLIF), are insufficient. This is the first randomised study to compare CBT-TLIF against traditional PS fixation and will provide recommendations for treating patients with lumbar degenerative disc disorders.Methods and analysisA blinded randomised controlled trial (blinding for the patient and statistician, rather than for the clinician and researcher) will be conducted. A total of 254 participants with lumbar disc degenerative disease who are candidates for TLIF surgery will be randomly allocated to either the CBT-TLIF group or the PS-TLIF group at a ratio of 1:1. The primary clinical outcome measures are the incidence of adjacent cranial facet joint violation, fusion rate and the screw loosening rate. Secondary clinical outcome measures are Visual Analogue Scale (VAS) of back pain, VAS of leg pain, Oswestry Disability Index, operative time, intraoperative blood loss and complications. These parameters will be evaluated on day 3, and then at 1, 3, 6, 12 and 24 months postoperatively.Ethics and disseminationThis study has been reviewed and approved by the Institutional Review Board of the Second Affiliated Hospital and Yuying Children's Hospital of Wenzhou Medical University (batch: 2017-03). The results will be presented in peer-reviewed journals and an international spine-related meeting after completion of the study.Trial registration numberNCT03105167; Pre-results.

Dataset Information

Effect of micrometer-scale roughness of the surface of Ti6Al4V pedicle screws in vitro and in vivo.

Background

Methods

Results

Conclusions

Publications

Effect of micrometer-scale roughness of the surface of Ti6Al4V pedicle screws in vitro and in vivo.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets