Dataset Information

Rotational alignment of the tibial component in total knee arthroplasty is better at the medial third of tibial tuberosity than at the medial border.

ABSTRACT: Correct rotational alignment of the femoral and tibial component is an important factor for successful TKA. The transepicondylar axis is widely accepted as a reference for the femoral component. There is not a standard reference for the tibial component. CT scans were used in this study to measure which of 2 tibial landmarks most reliably reproduces a correct femoro-tibial rotational alignment in TKA.80 patients received a cemented, unconstrained, cruciate-retaining TKA with a rotating platform. CT scans were performed 5-7 days postoperatively but before discharge. The rotational mismatch between the femoral and tibial components was measured. Furthermore, the rotational variance between the transepicondylar line, as a reference for the orientation of the femoral component and different tibial landmarks, was measured.There was notable rotational mismatch between the femoral and tibial components. The median mismatch was 0 degrees (range: 16.2 degrees relative external to 14.4 degrees relative internal rotation of the femoral component).Using the transepicondylar line as a reference for femoral rotational alignment and the medial third of the tuberosity as a reference for tibial rotational alignment, 67.5% of all TKA had a femoro-tibial variance within +/- 5 degrees, 85% within +/- 10 degrees and 97.5% within +/- 20 degrees. Using the medial border of the tibial tubercle as a reference this variance was greater, only 3.8% had a femoro-tibial variance within +/- 5 degrees, 15% within +/- 10 degrees and 68.8% within +/- 20 degrees.Using fixed bone landmarks for rotational alignment leads to a notable variance between femoral and tibial components. Referencing the tibial rotation on a line from the medial third of the tibial tubercle to the center of the tibial tray resulted in a better femoro-tibial rotational alignment than using the medial border of tibial tubercle as a landmark. Surgeons using fixed bearings with a high rotational constraint between the inlay and the femoral component should be aware of this effect to avoid premature polyethylene wear.Clinical trials registry NCT01022099.

SUBMITTER: Lutzner J

PROVIDER: S-EPMC2858718 | biostudies-literature | 2010 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Rotational alignment of the tibial component in total knee arthroplasty is better at the medial third of tibial tuberosity than at the medial border.

Lützner Jörg J Krummenauer Frank F Günther Klaus-Peter KP Kirschner Stephan S

BMC musculoskeletal disorders 20100325

<h4>Background</h4>Correct rotational alignment of the femoral and tibial component is an important factor for successful TKA. The transepicondylar axis is widely accepted as a reference for the femoral component. There is not a standard reference for the tibial component. CT scans were used in this study to measure which of 2 tibial landmarks most reliably reproduces a correct femoro-tibial rotational alignment in TKA.<h4>Methods</h4>80 patients received a cemented, unconstrained, cruciate-reta ...[more]

PMID: 20338042

Similar Datasets

Project description:PurposeThis study was carried out to investigate the accuracy of referring different locations of the patellar tendon attachment site and the geometrical center of the osteotomy surface for tibial rotational alignment and observe the influences of gender differences on the results.MethodsComputed tomography scans of 135 osteoarthritis patients (82 females and 53 males) with varus deformity was obtained to reconstruct three-dimensional (3D) models preoperatively. The medial boundary, medial one-sixth, and medial one-third of the patellar tendon attachment site were marked on the tibia. These points were projected on the tibial osteotomy plane and connected to the geometrical center (GC) of the osteotomy plane or the middle of the posterior cruciate ligament (PCL) to construct six tibial rotational axes (Akagi line, MBPT, MSPT1, MSPT2, MTPT1 and MTPT2). The mismatch angle between the vertical line of the SEA projected on the proximal tibial osteotomy surface and six different reference axes was measured. In additional, the effect of gender differences on rotational alignment for tibial component were assessed.ResultsRelative to the SEA, rotational mismatch angles were - 1.8° ± 5.1° (Akagi line), - 2.5° ± 5.3° (MBPT), 2.8° ± 5.3° (MSPT1), 4.5° ± 5.4° (MSPT2), 7.3° ± 5.4° (MTPT1), and 11.6° ± 5.8° (MTPT2) for different tibial rotational axes in all patients. All measurements differed significantly between the male and female. The tibial rotational axes with the least mean absolute deviation for the female or male were Akagi line or MSPT, respectively. There was no significant difference in whether the GC of the osteotomy surface or the midpoint of PCL termination was chosen as the posterior anatomical landmark when the medial boundary or medial one-sixth point of the patellar tendon attachment site was selected as the anterior anatomical landmark.ConclusionWhen referring patellar tendon attachment site as anterior anatomical landmarks for tibial rotational alignment, the influence of gender difference on the accuracy needs to be taken into account. The geometric center of the tibial osteotomy plane can be used as a substitute for the middle of the PCL termination when reference the medial boundary or medial one-sixth of the patellar tendon attachment site.

Project description:PurposeStability in the sagittal plane, particularly regarding anterior cruciate ligament compensation, and postoperative functionality and satisfaction remain issues in total knee arthroplasty. Therefore, this prospective study compared the clinical outcomes between medial-pivot-based and posterior-stabilised total knee arthroplasty based on anterior translation and clinical scores.MethodsTo assess outcomes of total knee arthroplasty for varus osteoarthritis, the anterior translation distance of the tibia relative to the femur was measured at 30 and 60° of flexion using a KS measure Arthrometer at 6 months postoperatively. The 2011 Knee Society Score, Forgotten Joint Score, visual analogue scale for pain, and range of motion were assessed at 6 months and 1 year postoperatively. The correlations among each score, anterior translation distance, range of motion, and visual analogue scale score for pain were investigated.ResultsThe medial-pivot and posterior-stabilised groups comprised 70 and 51 patients, respectively. The medial-pivot group exhibited a significantly shorter anterior translation distance at 60° flexion than the posterior-stabilised group. Furthermore, the medial-pivot group achieved significantly better outcomes regarding the visual analogue scale for pain, 2011 Knee Society Score, and Forgotten Joint Score than the posterior-stabilised group. A significant negative correlation was observed between the anterior translation distance and the function score of the 2011 Knee Society Score, whereas a significant positive correlation was found between the anterior translation distance and flexion angle, and between the extension angle and score of the Forgotten Joint Score or 2011 Knee Society Score. Significant negative correlations were also found between the pain visual analogue scale and both the 2011 Knee Society Score and Forgotten Joint Score.ConclusionIn total knee arthroplasty for osteoarthritis, the medial-pivot group displayed a shorter anterior translation distance than the posterior-stabilised group at 6 months postoperatively. The visual analogue scale score for pain was also significantly lower in the medial-pivot group than that in the posterior-stabilised group at both 6 months and 1 year postoperatively. Because a correlation was observed between the anterior translation distance and the function score, medial-pivot-based total knee arthroplasty was considered to significantly improve postoperative function compared to posterior-stabilised total knee arthroplasty.

Dataset Information

Rotational alignment of the tibial component in total knee arthroplasty is better at the medial third of tibial tuberosity than at the medial border.

Publications

Rotational alignment of the tibial component in total knee arthroplasty is better at the medial third of tibial tuberosity than at the medial border.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets