Synchronisation of tibial rotational alignment with femoral component in total knee arthroplasty.
Ontology highlight
ABSTRACT:
SUBMITTER: Lee DH
PROVIDER: S-EPMC2269015 | biostudies-other | 2008 Apr
REPOSITORIES: biostudies-other
Similar Datasets
Project description:BackgroundCorrect rotational alignment of the femoral and tibial component is an important factor for successful TKA. The transepicondylar axis is widely accepted as a reference for the femoral component. There is not a standard reference for the tibial component. CT scans were used in this study to measure which of 2 tibial landmarks most reliably reproduces a correct femoro-tibial rotational alignment in TKA.Methods80 patients received a cemented, unconstrained, cruciate-retaining TKA with a rotating platform. CT scans were performed 5-7 days postoperatively but before discharge. The rotational mismatch between the femoral and tibial components was measured. Furthermore, the rotational variance between the transepicondylar line, as a reference for the orientation of the femoral component and different tibial landmarks, was measured.ResultsThere was notable rotational mismatch between the femoral and tibial components. The median mismatch was 0 degrees (range: 16.2 degrees relative external to 14.4 degrees relative internal rotation of the femoral component).Using the transepicondylar line as a reference for femoral rotational alignment and the medial third of the tuberosity as a reference for tibial rotational alignment, 67.5% of all TKA had a femoro-tibial variance within +/- 5 degrees, 85% within +/- 10 degrees and 97.5% within +/- 20 degrees. Using the medial border of the tibial tubercle as a reference this variance was greater, only 3.8% had a femoro-tibial variance within +/- 5 degrees, 15% within +/- 10 degrees and 68.8% within +/- 20 degrees.ConclusionUsing fixed bone landmarks for rotational alignment leads to a notable variance between femoral and tibial components. Referencing the tibial rotation on a line from the medial third of the tibial tubercle to the center of the tibial tray resulted in a better femoro-tibial rotational alignment than using the medial border of tibial tubercle as a landmark. Surgeons using fixed bearings with a high rotational constraint between the inlay and the femoral component should be aware of this effect to avoid premature polyethylene wear.Trial registrationClinical trials registry NCT01022099.
| S-EPMC2858718 | biostudies-literature
Project description:BackgroundAccurate sizing is critical for the overall success of a total knee arthroplasty (TKA). This study's primary purpose was to investigate the ability to predict the tibial and femoral component size in a single implant system from patient demographics and anthropometric data. A secondary goal was to compare the predicted tibial and femoral component sizes from our statistical model with a previously validated electronic application used to predict the implant size.MethodsA consecutive series of 484 patients undergoing a primary TKA at a single institution was reviewed. Data on height, weight, body mass index, sex, age, and component size were collected. A proportional odds model was developed to predict tibial and femoral component sizes. The relationship between the proportional odds model predictions was also compared with the component sizes determined by the Arthroplasty Size Predictor electronic application.ResultsWeight, height, and sex predicted the implanted component size with an accuracy of 54.0% (n = 247/484) for the tibia and 51.1% (n = 231/484) for the femur. The accuracy improved to 94.4% (n = 457/484) for the tibia and 93.4% (n = 452/484) for the femur within ±1 component size. Our data are highly correlated to the Arthroplasty Size Predictor for the predicted tibial component size (ρ = 0.91, P < .001) and femoral component size (ρ = 0.89, P < .001).ConclusionsOur novel templating model may improve operative efficiency for a single TKA system. Our findings have a high concordance with a widely available electronic application used to predict implant sizes for a variety of TKA systems.
| S-EPMC7606840 | biostudies-literature
Project description:Background and purposePoor outcomes have been linked to errors in rotational alignment of total knee arthroplasty components. The aims of this study were to determine the correlation between rotational alignment and outcome, to review the success of revision for malrotated total knee arthroplasty, and to determine whether evidence-based guidelines for malrotated total knee arthroplasty can be proposed.Patients and methodsWe conducted a systematic review including all studies reporting on both rotational alignment and functional outcome. Comparable studies were used in a correlation analysis and results of revision were analyzed separately.Results846 studies were identified, 25 of which met the inclusion criteria. From this selection, 11 studies could be included in the correlation analysis. A medium positive correlation (ρ = 0.44, 95% CI: 0.27-0.59) and a large positive correlation (ρ = 0.68, 95% CI: 0.64-0.73) were found between external rotation of the tibial component and the femoral component, respectively, and the Knee Society score. Revision for malrotation gave positive results in all 6 studies in this field.InterpretationMedium and large positive correlations were found between tibial and femoral component rotational alignment on the one hand and better functional outcome on the other. Revision of malrotated total knee arthroplasty may be successful. However, a clear cutoff point for revision for malrotated total knee arthroplasty components could not be identified.
| S-EPMC4513597 | biostudies-literature
Project description:PurposeThis study was carried out to investigate the accuracy of referring different locations of the patellar tendon attachment site and the geometrical center of the osteotomy surface for tibial rotational alignment and observe the influences of gender differences on the results.MethodsComputed tomography scans of 135 osteoarthritis patients (82 females and 53 males) with varus deformity was obtained to reconstruct three-dimensional (3D) models preoperatively. The medial boundary, medial one-sixth, and medial one-third of the patellar tendon attachment site were marked on the tibia. These points were projected on the tibial osteotomy plane and connected to the geometrical center (GC) of the osteotomy plane or the middle of the posterior cruciate ligament (PCL) to construct six tibial rotational axes (Akagi line, MBPT, MSPT1, MSPT2, MTPT1 and MTPT2). The mismatch angle between the vertical line of the SEA projected on the proximal tibial osteotomy surface and six different reference axes was measured. In additional, the effect of gender differences on rotational alignment for tibial component were assessed.ResultsRelative to the SEA, rotational mismatch angles were - 1.8° ± 5.1° (Akagi line), - 2.5° ± 5.3° (MBPT), 2.8° ± 5.3° (MSPT1), 4.5° ± 5.4° (MSPT2), 7.3° ± 5.4° (MTPT1), and 11.6° ± 5.8° (MTPT2) for different tibial rotational axes in all patients. All measurements differed significantly between the male and female. The tibial rotational axes with the least mean absolute deviation for the female or male were Akagi line or MSPT, respectively. There was no significant difference in whether the GC of the osteotomy surface or the midpoint of PCL termination was chosen as the posterior anatomical landmark when the medial boundary or medial one-sixth point of the patellar tendon attachment site was selected as the anterior anatomical landmark.ConclusionWhen referring patellar tendon attachment site as anterior anatomical landmarks for tibial rotational alignment, the influence of gender difference on the accuracy needs to be taken into account. The geometric center of the tibial osteotomy plane can be used as a substitute for the middle of the PCL termination when reference the medial boundary or medial one-sixth of the patellar tendon attachment site.
| S-EPMC9327362 | biostudies-literature
Project description:BackgroundDespite reasonable accuracy with preoperative templating, the search for an optimal planning tool remains an unsolved dilemma. The purpose of the present study was to apply machine learning (ML) using preoperative demographic variables to predict mismatch between templating and final component size in primary total knee arthroplasty (TKA) cases.MethodsThis was a retrospective case-control study of primary TKA patients between September 2012 and April 2018. The primary outcome was mismatch between the templated and final implanted component sizes extracted from the operative database. The secondary outcome was mismatch categorized as undersized and oversized. Five supervised ML algorithms were trained using 6 demographic features. Prediction accuracies were obtained as a metric of performance for binary mismatch (yes/no) and multilevel (undersized/correct/oversized) classifications.ResultsA total of 1801 patients were included. For binary classification, the best-performing algorithm for predicting femoral and tibial mismatch was the stochastic gradient boosting model (area under the curve: 0.76/0.72, calibration intercepts: 0.05/0.05, calibration slopes: 0.55/0.7, and Brier scores: 0.20/0.21). For multiclass classification, the best-performing algorithms had accuracies of 83.9% and 82.9% for predicting the concordance/mismatch of the femoral and tibial implant, respectively. Model predictions of greater than 51.0% and 47.9% represented high-risk thresholds for femoral and tibial sizing mismatch, respectively.ConclusionsML algorithms predicted templating mismatch with good accuracy. External validation is necessary to confirm the performance and reliability of these algorithms. Predicting sizing mismatch is the first step in using ML to aid in the prediction of final TKA component sizes. Further studies to optimize parameters and predictions for the algorithms are ongoing.
| S-EPMC8167319 | biostudies-literature
Project description:BackgroundRotational alignment of prosthetic components in total knee arthroplasty (TKA) is important to successful outcomes. Component malrotation is a known cause of revision and understanding normal rotational alignment may help recreate normal joint kinematics. To date, no large MRI study assessing femorotibial rotational alignment in nonarthritic knees has been undertaken.Questions/purposesIs Insall's tibial axis a reliable rotational landmark against common femoral rotational axes in the nonarthritic patient population?MethodsWe reviewed 544 knee MRI scans performed for suspected soft tissue pathology and identified Insall's tibial rotational axis as well as the femoral clinical trans-epicondylar axis (TEAc), femoral surgical trans-epicondylar axis (TEAs), posterior condylar articular axis (PCA), and a modified Eckhoff's cylindrical axis. The perpendiculars of these axes were superimposed on Insall's tibial axis, and the angular differences were measured.ResultsInsall's axis was internally rotated to the TEAc by 1.4°, externally rotated to Eckhoff's cylindrical axis by 1.8°, externally rotated to the TEAs by 2.7°, and externally rotated to the PCA by 3.5°. The mean deviation from 0° (optimal alignment for each femoral axis) was significantly greater for the PCA relative to all other femoral axis.ConclusionInsall's axis is a reliable landmark for rotational positioning of the tibial component and may optimize femorotibial kinematics in fixed-bearing TKA.
| S-EPMC5026653 | biostudies-literature
Project description:PurposeThe aim of this study is to investigate the prognostic value of tibial component coverage (over-hang and under-hang) and the alignment of total knee arthroplasty (TKA) components 1 week after surgery. We select patient-reported outcome measures (PROMS) (the Knee Society score (KSS score) and the Western Ontario and McMaster Universities Osteoarthritis Index-pain score (WOMAC pain score)) and tibial bone resorption (TBR) 2 years after surgery as the end points.MethodsThe study retrospectively analyzed 109 patients undergoing TKA (fixed-bearing prosthesis with asymmetrical tibial tray) from January 2014 to December 2017 in Huashan Hospital. By using standard long-leg X-rays, anteroposterior (AP) and lateral X-rays of the knee, tibial component coverage (under-hang or over-hang), AP tibial-femoral anatomical angle (AP-TFA), AP femoral angle (AP-FA), AP tibial angle (AP-TA), and lateral tibial angle (L-TA) were measured at 1 week after surgery, while TBR was measured through postoperative 1-week and 2-year AP and lateral radiographs of the knee on three sides (medial side, lateral side on AP radiograph, and anterior side on lateral radiograph). The Pearson correlation analysis, simple linear regression, multiple linear regression, the Student's t test, and one-way ANOVA together with Tukey's post hoc test (or Games-Howell post hoc test) were used in the analyses.ResultsTibial under-hang was more likely to appear in our patients following TKA (42%, medially, 39%, laterally, and 25%, anteriorly). In multivariate linear regression analysis of TBR, tibial under-hang (negative value) 1 week after surgery was positively correlated with TBR 2 years later on the medial (p = 0.003) and lateral (p = 0.026) side. Tibial over-hang (positive value) 1 week after surgery on the medial side was found negatively related with KSS score (p = 0.004) and positively related with WOMAC pain score (p = 0.036) 2 years later in multivariate linear regression analysis of PROMS. Both scores were better in the anatomically sized group than in the mild over-hang group (or severe over-hang) (p < 0.001). However, no significant relationship was found between the alignment of TKA components at 1 week after surgery and the end points (TBR and PROMS) 2 years later.ConclusionUnder-hang of the tibial component on both the medial and lateral sides can increase the risk of TBR 2 years later. Over-hang of tibial component on the medial side decreases the PROMS (KSS score and WOMAC pain score) 2 years later. An appropriate size of tibial component during TKA is extremely important for patient's prognosis, while the alignment of components might not be as important.
| S-EPMC7881541 | biostudies-literature
Project description:PURPOSE:During total knee arthroplasty, few rotating reference axes can be reliably used after tibial resection. We speculated that a line that passes through the lateral edge of the posterior cruciate ligament (PCL) at its tibial attachment after resection and the most prominent point of the tibial tubercle [after-tibial resection (ATR) line] will provide a good reference axis. In this study, we aimed to evaluate the association between ATR and Akagi's lines. MATERIALS AND METHODS:In this case-control simulation study, we retrospectively evaluated 38 patients with varus knee and 28 patients with valgus knee. We defined the reference cutting plane as 10 mm distal from the lateral articular surface of the tibia in varus group and as 7 mm distal from the medial articular surface in the valgus group. We measured angles between Akagi's line and the ATR line (ATR line angle) as well as between Akagi's line and 1/3 Akagi's line (1/3 Akagi's line angle), which passes through the midpoint of PCL and the medial third of the patellar tendon. We used paired t-tests to determine the significance of differences between these angles, with p < 0.05 indicating statistical significance. Intra- and interclass correlation coefficients for the reproducibility of 1/3 Akagi's line angle and ATR line angle were analyzed by two surgeons. RESULTS:We found that 1/3 Akagi's line angle was 10.2° ± 1.3° in the varus group and 10.9° ± 1.3° in the valgus group (p = 0.017). The ATR line was positioned externally compared with Akagi's line in all patients. Mean ATR line angles at 0°, 3° and 7° posterior slopes were 6.1° ± 1.9°, 5.8° ± 2.0° and 6.0° ± 1.7° in the varus group and 6.3° ± 2.3°, 6.2° ± 2.3° and 5.4° ± 2.1° in the valgus group, respectively. There were no significant differences in the ATR line angle between the varus and valgus groups. (p = 0.34-0.67) Intra- and interclass correlation coefficients for the reproducibility of 1/3 Akagi's line angle were 0.936 and 0.986 and those for the reproducibility of ATR line angle were 0.811 and 0.839. CONCLUSIONS:The ATR line was positioned between Akagi's line and 1/3 Akagi's line in all patients and was a valid option for evaluating rotational tibial alignment after tibial resection.
| S-EPMC6301685 | biostudies-literature
Project description:Background:Periprosthetic fracture following total knee arthroplasty (TKA) is usually associated with a traumatic event and typically treated with fracture fixation techniques. However, we report on a series of patients with early atraumatic condyle fractures that occurred as a result of insufficiency of the unloaded preoperative femoral condyle treated with delayed reconstruction. Methods:We retrospectively reviewed a series of 7 patients who sustained femoral condyle fractures following TKA and evaluated risk factors for insufficiency. Results:There were 6 females and 1 male with an average age of 65.5 (range, 63-75) years and an average body mass index of 29.4 (range, 27-32). Fracture occurred on average 24.9 days from the index surgery and secondary to a low energy mechanism. Five patients had valgus alignment (mean, 15.2°) preoperatively and sustained fracture of the unloaded medial femoral condyle. Two patients had varus alignment (mean, 7.0°) preoperatively and both fractured the unloaded lateral condyle. One patient underwent early intervention requiring distal femoral replacement secondary to femoral bone loss. The remaining 6 patients underwent delayed surgery for an average of 6 weeks to allow for fracture healing followed by femoral component revision. At last follow-up (average, 48.5 months), 1 patient required a tibial component revision; however, no revision of the femoral component was required. Conclusions:Early femoral condyle insufficiency fractures following TKA may be a risk in females with poor bone quality and preoperative valgus alignment. Delayed surgery and femoral component revision is a treatment strategy that prevented the need for other tertiary reconstruction.
| S-EPMC5994640 | biostudies-literature
Project description:Anteroposterior radiographs that included the whole tibia were taken before and after 75 total knee arthroplasties in 48 patients. The same tibial extra-medullary alignment guide system was used in every knee. The average tibial component alignment was 0.4 (SD 2.5, range -4.9 to 6.4) degrees of valgus post-operatively. 59 tibial components (78.7%) had a tibial cut within 3 degrees from being perpendicular to the mechanical axis, ten were too valgus (13.3%) and six were too varus (8%). The chance of the tibial components becoming too varus was higher if there was lateral tibial bowing, compared with no tibial bowing (p=0.048). A smaller lateral width of the leg increased the chance of the tibial components becoming too valgus (p=0.047).
| S-EPMC2532261 | biostudies-other