Dataset Information

DDSolver: an add-in program for modeling and comparison of drug dissolution profiles.

ABSTRACT: In recent years, several mathematical models have been developed for analysis of drug dissolution data, and many different mathematical approaches have been proposed to assess the similarity between two drug dissolution profiles. However, until now, no computer program has been reported for simplifying the calculations involved in the modeling and comparison of dissolution profiles. The purposes of this article are: (1) to describe the development of a software program, called DDSolver, for facilitating the assessment of similarity between drug dissolution data; (2) to establish a model library for fitting dissolution data using a nonlinear optimization method; and (3) to provide a brief review of available approaches for comparing drug dissolution profiles. DDSolver is a freely available program which is capable of performing most existing techniques for comparing drug release data, including exploratory data analysis, univariate ANOVA, ratio test procedures, the difference factor f (1), the similarity factor f (2), the Rescigno indices, the 90% confidence interval (CI) of difference method, the multivariate statistical distance method, the model-dependent method, the bootstrap f (2) method, and Chow and Ki's time series method. Sample runs of the program demonstrated that the results were satisfactory, and DDSolver could be served as a useful tool for dissolution data analysis.

SUBMITTER: Zhang Y

PROVIDER: S-EPMC2895453 | biostudies-literature | 2010 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

DDSolver: an add-in program for modeling and comparison of drug dissolution profiles.

Zhang Yong Y Huo Meirong M Zhou Jianping J Zou Aifeng A Li Weize W Yao Chengli C Xie Shaofei S

The AAPS journal 20100406 3

In recent years, several mathematical models have been developed for analysis of drug dissolution data, and many different mathematical approaches have been proposed to assess the similarity between two drug dissolution profiles. However, until now, no computer program has been reported for simplifying the calculations involved in the modeling and comparison of dissolution profiles. The purposes of this article are: (1) to describe the development of a software program, called DDSolver, for faci ...[more]

PMID: 20373062

Similar Datasets

Project description:Many solid-dose oral drug products are engineered to release their active ingredients into the body at a certain rate. Techniques for measuring the dissolution or degradation of a drug product in vitro play a crucial role in predicting how a drug product will perform in vivo. However, existing techniques are often labor-intensive, time-consuming, irreproducible, require specialized analytical equipment, and provide only "snapshots" of drug dissolution every few minutes. These limitations make it difficult for pharmaceutical companies to obtain full dissolution profiles for drug products in a variety of different conditions, as recommended by the US Food and Drug Administration. Additionally, for drug dosage forms containing multiple controlled-release pellets, particles, beads, granules, etc. in a single capsule or tablet, measurements of the dissolution of the entire multi-particle capsule or tablet are incapable of detecting pellet-to-pellet variations in controlled release behavior. In this work, we demonstrate a simple and fully-automated technique for obtaining dissolution profiles from single controlled-release pellets. We accomplished this by inverting the drug dissolution problem: instead of measuring the increase in the concentration of drug compounds in the solution during dissolution (as is commonly done), we monitor the decrease in the buoyant mass of the solid controlled-release pellet as it dissolves. We weigh single controlled-release pellets in fluid using a vibrating tube sensor, a piece of glass tubing bent into a tuning-fork shape and filled with any desired fluid. An electronic circuit keeps the glass tube vibrating at its resonance frequency, which is inversely proportional to the mass of the tube and its contents. When a pellet flows through the tube, the resonance frequency briefly changes by an amount that is inversely proportional to the buoyant mass of the pellet. By passing the pellet back-and-forth through the vibrating tube sensor, we can monitor its mass as it degrades or dissolves, with high temporal resolution (measurements every few seconds) and mass resolution (700 nanogram resolution). As a proof-of-concept, we used this technique to measure the single-pellet dissolution profiles of several commercial controlled-release proton pump inhibitors in simulated stomach and intestinal contents, as well as comparing name-brand and generic formulations of the same drug. In each case, vibrating tube sensor data revealed significantly different dissolution profiles for the different drugs, and in some cases our method also revealed differences between different pellets from the same drug product. By measuring any controlled-release pellets, particles, beads, or granules in any physiologically-relevant environment in a fully-automated fashion, this method can augment and potentially replace current dissolution tests and support product development and quality assurance in the pharmaceutical industry.

Project description:The dissolution of inhaled drug particles in the lungs is a challenge to model using biorelevant methods in terms of (i) collecting a respirable emitted aerosol fraction and dose, (ii) presenting this to a small volume of medium that is representative of lung lining fluid, and (iii) measuring the low concentrations of drug released. We report developments in methodology for each of these steps and utilize mechanistic in silico modeling to evaluate the in vitro dissolution profiles in the context of plasma concentration-time profiles. The PreciseInhale aerosol delivery system was used to deliver Flixotide aerosol particles to Dissolv It apparatus for measurement of dissolution. Different media were used in the Dissolv It chamber to investigate their effect on dissolution profiles, these were (i) 1.5% poly(ethylene oxide) with 0.4% l-alphaphosphatidyl choline, (ii) Survanta, and (iii) a synthetic simulated lung lining fluid (SLF) based on human lung fluid composition. For fluticasone proprionate (FP) quantification, solid phase extraction was used for sample preparation with LC-MS/MS analysis to provide an assay that was fit for purpose with a limit of quantification for FP of 312 pg/mL. FP concentration-time profiles in the flow-past perfusate were similar irrespective of the medium used in the Dissolv It chamber (∼0.04-0.07%/min), but these were significantly lower than transfer of drug from air-to-perfusate in isolated perfused lungs (0.12%/min). This difference was attributed to the Dissolv It system representing slower dissolution in the central region of the lungs (which feature nonsink conditions) compared to the peripheral regions that are represented in the isolated lung preparation. Pharmacokinetic parameters ( Cmax, Tmax, and AUC0-∞) were estimated from the profiles for dissolution in the different lung fluid simulants and were predicted by the simulation within 2-fold of the values reported for inhaled FP (1000 μg dose) administered via Flixotide Evohaler 250 μg strength inhaler in man. In conclusion, we report methods for performing biorelevant dissolution studies for orally inhaled products and illustrate how they can provide inputs parameters for physiologically based pharmacokinetic (PBPK) modeling of inhaled medicines.

Dataset Information

DDSolver: an add-in program for modeling and comparison of drug dissolution profiles.

Publications

DDSolver: an add-in program for modeling and comparison of drug dissolution profiles.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets