Dataset Information

Droplet-based microsystem for multi-step bioreactions.

ABSTRACT: A droplet-based microfluidic platform was used to perform on-chip droplet generation, merging and mixing for applications in multi-step reactions and assays. Submicroliter-sized droplets can be produced separately from three identical droplet-generation channels and merged together in a single chamber. Three different mixing strategies were used for mixing the merged droplet. For pure diffusion, the reagents were mixed in approximately 10 min. Using flow around the stationary droplet to induce circulatory flow within the droplet, the mixing time was decreased to approximately one minute. The shortest mixing time (10 s) was obtained with bidirectional droplet motion between the chamber and channel, and optimization could result in a total time of less than 1 s. We also tested this on-chip droplet generation and manipulation platform using a two-step thermal cycled bioreaction: nested TaqMan PCR. With the same concentration of template DNA, the two-step reaction in a well-mixed merged droplet shows a cycle threshold of approximately 6 cycles earlier than that in the diffusively mixed droplet, and approximately 40 cycles earlier than the droplet-based regular (single-step) TaqMan PCR.

SUBMITTER: Wang F

PROVIDER: S-EPMC2948463 | biostudies-literature | 2010 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Droplet-based microsystem for multi-step bioreactions.

Wang Fang F Burns Mark A MA

Biomedical microdevices 20100601 3

A droplet-based microfluidic platform was used to perform on-chip droplet generation, merging and mixing for applications in multi-step reactions and assays. Submicroliter-sized droplets can be produced separately from three identical droplet-generation channels and merged together in a single chamber. Three different mixing strategies were used for mixing the merged droplet. For pure diffusion, the reagents were mixed in approximately 10 min. Using flow around the stationary droplet to induce c ...[more]

PMID: 20204702

Similar Datasets

Project description:Epidemiological time series forecasting plays an important role in health public systems, due to its ability to allow managers to develop strategic planning to avoid possible epidemics. In this paper, a hybrid learning framework is developed to forecast multi-step-ahead (one, two and three-month-ahead) meningitis cases in four states of Brazil. First, the proposed approach applies an ensemble empirical mode decomposition (EEMD) to decompose the data into intrinsic mode functions and residual components. Then, each component is used as the input of five different forecasting models, and, from there, forecasted results are obtained. Finally, all combinations of models and components are developed, and for each case, the forecasted results are weighted integrated (WI) to formulate a heterogeneous ensemble forecaster for the monthly meningitis cases. In the final stage, a multi-objective optimization (MOO) using the Non-Dominated Sorting Genetic Algorithm - version II is employed to find a set of candidates' weights, and then the Technique for Order of Preference by similarity to Ideal Solution (TOPSIS) is applied to choose the adequate set of weights. Next, the most adequate model is the one with the best generalization capacity out-of-sample in terms of performance criteria including mean absolute error (MAE), relative root mean squared error (RRMSE) and symmetric mean absolute percentage error (sMAPE). By using MOO, the intention is to enhance the performance of the forecasting models by improving simultaneously their accuracy and stability measures. To access the model's performance, comparisons based on metrics are conducted with: (i) EEMD, heterogeneous ensemble integrated by direct strategy, or simple sum; (ii) EEMD, homogeneous ensemble of components WI; (iii) models without signal decomposition. At this stage, MAE, RRMSE, sMAPE criteria and Diebold-Mariano statistical test are adopted. In all twelve scenarios, the proposed framework was able to perform more accurate and stable forecasts, which showed, on 89.17% of the cases, that the errors of the proposed approach are statistically lower than other approaches. These results showed that combining EEMD, heterogeneous ensemble and WI with weights obtained by optimization can develop precise and stable forecasts. The modelling developed in this paper is promising and can be used by managers to support decision making.

Project description:The Shipboard Automatic Identification System (AIS) is crucial for navigation safety and maritime surveillance, data mining and pattern analysis of AIS information have attracted considerable attention in terms of both basic research and practical applications. Clustering of spatio-temporal AIS trajectories can be used to identify abnormal patterns and mine customary route data for transportation safety. Thus, the capacities of navigation safety and maritime traffic monitoring could be enhanced correspondingly. However, trajectory clustering is often sensitive to undesirable outliers and is essentially more complex compared with traditional point clustering. To overcome this limitation, a multi-step trajectory clustering method is proposed in this paper for robust AIS trajectory clustering. In particular, the Dynamic Time Warping (DTW), a similarity measurement method, is introduced in the first step to measure the distances between different trajectories. The calculated distances, inversely proportional to the similarities, constitute a distance matrix in the second step. Furthermore, as a widely-used dimensional reduction method, Principal Component Analysis (PCA) is exploited to decompose the obtained distance matrix. In particular, the top k principal components with above 95% accumulative contribution rate are extracted by PCA, and the number of the centers k is chosen. The k centers are found by the improved center automatically selection algorithm. In the last step, the improved center clustering algorithm with k clusters is implemented on the distance matrix to achieve the final AIS trajectory clustering results. In order to improve the accuracy of the proposed multi-step clustering algorithm, an automatic algorithm for choosing the k clusters is developed according to the similarity distance. Numerous experiments on realistic AIS trajectory datasets in the bridge area waterway and Mississippi River have been implemented to compare our proposed method with traditional spectral clustering and fast affinity propagation clustering. Experimental results have illustrated its superior performance in terms of quantitative and qualitative evaluations.

Dataset Information

Droplet-based microsystem for multi-step bioreactions.

Publications

Droplet-based microsystem for multi-step bioreactions.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets