Hybrid, elastomeric hydrogels crosslinked by multifunctional block copolymer micelles.
Ontology highlight
ABSTRACT:
SUBMITTER: Xiao L
PROVIDER: S-EPMC3027150 | biostudies-literature | 2010 Nov
REPOSITORIES: biostudies-literature
Publications
Hybrid, elastomeric hydrogels crosslinked by multifunctional block copolymer micelles.
Xiao Longxi L Liu Chao C Zhu Jiahua J Pochan Darrin J DJ Jia Xinqiao X
Soft matter 20101101 21
Amphiphlic block copolymers consisting of hydrophilic, poly(acrylic acid) randomly decorated with acrylate groups and hydrophobic, rubbery poly(n-butyl acrylate) self-assembled into well-defined micelles with an average diameter of ~21 nm. Radical polymerization of acrylamide in the presence of the crosslinkable micelles gave rise to hybrid, elastomeric hydrogels whose mechancial properties can be readily tuned by varying the BCM concentration. ...[more]
Similar Datasets
Project description:Block copolymer micelles (BCMs) were prepared from amphiphilic diblock copolymers of poly(n-butyl acrylate) and poly(acrylic acid) partially modified with 2-hydroxyethyl acrylate. Radical polymerization of acrylamide in the presence of micellar crosslinkers gave rise to elastomeric hydrogels (BCM-PAAm) whose mechanical properties can be tuned by varying the BCM composition. Transmission electron microscopy (TEM) imaging revealed stretch-induced, reversible micelle deformation in BCM-PAAm gels. A model hydrophobic drug, pyrene, loaded into the micelle core prior to the formation of BCM-PAAm gels, was dynamically released in response to externally applied mechanical forces. The BCM-crosslinked hydrogels with combined strength and force-modulated drug release are attractive candidates for the repair and regeneration of mechanically-active tissues.
| S-EPMC3459338 | biostudies-literature
Project description:We used photo irradiation to design core crosslinked polymeric micelles whose only significant physico-chemical change was in their physico-chemical stability, which helps elucidate poly(ethylene glycol) (PEG)-related immunogenicity. Synthetic routes and compositions of PEG-b-poly(aspartic acid) block copolymers were optimized with the control of n-alkyl chain length and photo-sensitive chalcone moieties. The conjugation ratio between n-alkyl chain and the chalcone moieties was controlled, and upon the mild photo irradiation of polymeric micelles, permanent crosslink proceeded in the micelle cores. In the optimized condition, the core crosslinked (CCL) micelles exhibited no dissociation while the non-CCL micelles exhibited dissociation. These results indicate that the photo-crosslinking reactions in the inner core were successful. A gel-permeation chromatography (GPC) measurement revealed a difference between the micellar-formation stability of CCL micelles and that of the non-CCL micelles. GPC experiments revealed that the CCL micelles were more stable than the non-CCL micelles. Our research also revealed that photo-crosslinking reactions did not change the core property for drug encapsulation. In conclusion, the prepared CCL micelles exhibited the same diameter, the same formula, and the same inner-core properties for drug encapsulation as did the non-CCL micelles. Moreover, the CCL micelles exhibited non-dissociable micelle formation, while the non-CCL micelles exhibited dissociation into single block copolymers.
| S-EPMC6418968 | biostudies-literature
Project description:While the formation of (tri)block copolymer hydrogels has been extensively investigated, such studies mostly focused on equilibrium self-assembling whereas the use of preformed structures as building blocks such as out of equilibrium, quenched, nanofibrillar micelles is still a challenge. Here, we demonstrate that quenched, ultralong polystyrene-b-poly(ethylene oxide) (PS-b-PEO) micelles can be used as robust precursors of hydrogels. Two cross-linking strategies, (i) thermal fusion of micellar cores and (ii) chemical cross-linking of preformed micellar coronas were studied. The gelation process and the structure of the micellar networks were investigated by in situ rheological measurements, confocal microscopy and transmission electron microscopy. Direct observation of core fusion of preformed quenched micelles is provided validating this method as a robust gelation route. Using time sweep rheological experiments, it was found for both cross-linking methods that these 3D "mikado" gels are formed in three different stages, containing (1) initiation, (2) transition (growth), and (3) stabilization regimes.
| S-EPMC6150727 | biostudies-literature
Project description:Paraspeckles are constructed by NEAT1_2 architectural long noncoding RNAs. Their characteristic cylindrical shapes, with highly ordered internal organization, distinguish them from typical liquid-liquid phase-separated condensates. We experimentally and theoretically investigated how the shape and organization of paraspeckles are determined. We identified the NEAT1_2 RNA domains responsible for shell localization of the NEAT1_2 ends, which determine the characteristic internal organization. Using the soft matter physics, we then applied a theoretical framework to understand the principles that determine NEAT1_2 organization as well as shape, number, and size of paraspeckles. By treating paraspeckles as amphipathic block copolymer micelles, we could explain and predict the experimentally observed behaviors of paraspeckles upon NEAT1_2 domain deletions or transcriptional modulation. Thus, we propose that paraspeckles are block copolymer micelles assembled through a type of microphase separation, micellization. This work provides an experiment-based theoretical framework for the concept that ribonucleoprotein complexes (RNPs) can act as block copolymers to form RNA-scaffolding biomolecular condensates with optimal sizes and structures in cells.
| S-EPMC8204865 | biostudies-literature
Project description:Amphiphilic block copolymers can assemble into a variety of structures on the nanoscale in selective solvent. The micelle blending protocol offers a simple unique route to reproducibly produce polymer nanostructures. Here we expand this blending protocol to a range of polymer micelle systems and self-assembly routes. We found by exploring a range of variables that the systems must be able to reach global equilibrium at some point for the blending protocol to be successful. Our results demonstrate the kinetics requirements, specifically core block glass transition temperature, Tg, and length of the block limiting the exchange rates, for the blending protocol which can then be applied to a wide range of polymer systems to access this simple protocol for polymer self-assembly.
| S-EPMC4762687 | biostudies-literature
Project description:Responsive fluorescent materials offer a high potential for sensing and (bio-)imaging applications. To investigate new concepts for such materials and to broaden their applicability, the previously reported non-fluorescent zinc(II) complex [Zn(L)] that shows coordination-induced turn-on emission was encapsulated into a family of non-fluorescent polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) diblock copolymer micelles leading to brightly emissive materials. Coordination-induced turn-on emission upon incorporation and ligation of the [Zn(L)] in the P4VP core outperform parent [Zn(L)] in pyridine solution with respect to lifetimes, quantum yields, and temperature resistance. The quantum yield can be easily tuned by tailoring the selectivity of the employed solvent or solvent mixture and, thus, the tendency of the PS-b-P4VP diblock copolymers to self-assemble into micelles. A medium-dependent off-on sensor upon micelle formation could be established by suppression of non-micelle-borne emission background pertinent to chloroform through controlled acidification indicating an additional pH-dependent process.
| S-EPMC9310857 | biostudies-literature
Project description:Close-packed structures of uniformly sized spheres are ubiquitous across diverse material systems including elements, micelles, and colloidal assemblies. However, the controlled access to a specific symmetry of self-assembled close-packed spherical particles has not been well established. We investigated the ordering of spherical block copolymer micelles in aqueous solutions that was induced by rapid temperature changes referred to as quenching. As a function of quench depth, the quenched self-assembled block copolymer micelles formed three different close-packed structures: face-centered cubic (fcc), random stacking of hexagonal-close-packed layers (rhcp), and hexagonal-close-packed (hcp). The induced hcp and rhcp structures were stable for at least a few weeks when maintained at their quench temperatures, but heating or cooling these hcp and rhcp structures transformed both structures to fcc crystallites with coarsening of the crystal grains, which suggests that these noncubic close-packed structures are intermediate states. Time-resolved scattering experiments prove that the micellar rhcp structures do not originate from the rapid growth of competing close-packed structures. We speculate that the long-lived metastable hcp and rhcp structures originate from the small size of crystal grains, which introduces a nonnegligible Laplace pressure to the crystal domains. The reported transitions from the less stable hcp to the more stable rhcp and fcc are experimental observations of Ostwald's rule manifesting the transition order of the key close-packed structures in the crystallization of close-packed uniform spheres.
| S-EPMC6048542 | biostudies-literature
Project description:Mixtures of amphiphilic polymers and surfactants are used in a wide range of applications, e.g., pharmaceuticals, detergents, cosmetics, and drug delivery systems. Still, many questions remain on how the structure and, in particular, the kinetics of block copolymer micelles are affected in the presence of surfactants and what controls the solubilization kinetics. In this work, we have studied the stability and solubilization kinetics of block copolymer micelles upon the addition of the surfactant sodium dodecyl sulfate (SDS) using small-angle X-ray/neutron scattering. The ability of the surfactant to dissolve polymer micelles or form mixed micelles has been investigated using two types of amphiphilic polymers, poly(ethylene-alt-propylene)-poly(ethylene oxide) (PEP1-PEO20) and n-alkyl-functionalized PEO (C28-PEO5). The exchange kinetics of C28-PEO5 micelles are in the order of hours, while PEP1-PEO20 micelles are known to be frozen on a practical timescale. In this work, we show that the addition of SDS to PEP1-PEO20 provides virtually no solubilization, even after an extended period of time. However, upon adding SDS to C28-PEO5 micelles, we observe micellar dissolution and formation of mixed micelles occurring on the timescale of hours. Using a coexistence model of mixed and neat micelles, the SAXS data were analyzed to provide detailed structural parameters over time. First, we observe a fast fragmentation/fission step followed by a slow reorganization process. The latter process is essentially independent of concentration at low volume fraction but is greatly accelerated at larger concentrations. This might indicate a crossover from a predominance of molecular exchange to fusion/fission processes.
| S-EPMC7660944 | biostudies-literature
Project description:Beneficiation wastewater contains various types of pollutants, such as heavy metal ions and organic pollutants. In this work, a silica-based amphiphilic block copolymer, SiO2-g-PBMA-b-PDMAEMA, was obtained by surface-initiated atom transfer radical polymerization (SI-ATRP) for Cu(II) and sodium oleate adsorption in beneficiation wastewater, using butyl methacrylate (BMA) as a hydrophobic monomer and 2-(dimethylamino)ethylmethacrylate (DMAEMA) as a hydrophilic monomer. FTIR, TGA, NMR, GPC, XRD, N2 adsorption-desorption isotherms and TEM were used to characterize the structure and morphology of the hybrid adsorbent. The introduction of PBMA greatly increased the adsorption of sodium oleate on SiO2-g-PBMA-b-PDMAEMA. Adsorption kinetics showed that the adsorption of Cu(II) or sodium oleate on SiO2-g-PBMA-b-PDMAEMA fitted the pseudo-second-order model well. Adsorption isotherms of Cu(II) on SiO2-g-PBMA-b-PDMAEMA were better described by the Langmuir adsorption isotherm model, and sodium oleate on SiO2-g-PBMA-b-PDMAEMA was better described by the Freundlich adsorption isotherm model. The maximum adsorption capacity of Cu(II) and sodium oleate calculated from Langmuir adsorption isotherm equation reached 448.43 mg·g-1 and 129.03 mg·g-1, respectively. Chelation and complexation were considered as the main driving forces of Cu(II) adsorption, and the van der Waals force as well as weak hydrogen bonds were considered the main driving forces of sodium oleate adsorption. The adsorbent was recyclable and showed excellent multicomponent adsorption for Cu(II) and sodium oleate in the mixed solution. SiO2-g-PBMA-b-PDMAEMA represents a satisfying adsorption material for the removal of heavy metal ions and organic pollutants in beneficiation wastewater.
| S-EPMC9571196 | biostudies-literature
Project description:Nanoparticles of the spin-crossover coordination polymer [FeL(bipy)]n were synthesized by confined crystallization within the core of polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) diblock copolymer micelles. The 4VP units in the micellar core act as coordination sites for the Fe complex. In the bulk material, the spin-crossover nanoparticles in the core are well isolated from each other allowing thermal treatment without disintegration of their structure. During annealing above the glass transition temperature of the PS block, the transition temperature is shifted gradually to higher temperatures from the as-synthesized product (T1/2 ?=163?K and T1/2 ?=170?K) to the annealed product (T1/2 ?=203?K and T1/2 ?=217?K) along with an increase in hysteresis width from 6?K to 14?K. Thus, the spin-crossover properties can be shifted towards the properties of the related bulk material. The stability of the nanocomposite allows further processing, such as electrospinning from solution.
| S-EPMC7155125 | biostudies-literature