Automatic target recognition based on cross-plot.
Ontology highlight
ABSTRACT:
SUBMITTER: Wong KK
PROVIDER: S-EPMC3183066 | biostudies-literature | 2011
REPOSITORIES: biostudies-literature
Publications
Automatic target recognition based on cross-plot.
Wong Kelvin Kian Loong KK Abbott Derek D
PloS one 20110929 9
Automatic target recognition that relies on rapid feature extraction of real-time target from photo-realistic imaging will enable efficient identification of target patterns. To achieve this objective, Cross-plots of binary patterns are explored as potential signatures for the observed target by high-speed capture of the crucial spatial features using minimal computational resources. Target recognition was implemented based on the proposed pattern recognition concept and tested rigorously for it ...[more]
Similar Datasets
Project description:Alfalfa is the most widely cultivated forage legume, with approximately 30 million hectares planted worldwide. Genetic improvements in alfalfa have been highly successful in developing cultivars with exceptional winter hardiness and disease resistance traits. However, genetic improvements have been limited for complex economically important traits such as biomass. One of the major bottlenecks is the labor-intensive phenotyping burden for biomass selection. In this study, we employed two alfalfa fields to pave a path to overcome the challenge by using UAV images with fully automatic field plot segmentation for high-throughput phenotyping. The first field was used to develop the prediction model and the second field to validate the predictions. The first and second fields had 808 and 1025 plots, respectively. The first field had three harvests with biomass measured in May, July, and September of 2019. The second had one harvest with biomass measured in September of 2019. These two fields were imaged one day before harvesting with a DJI Phantom 4 pro UAV carrying an additional Sentera multispectral camera. Alfalfa plot images were extracted by GRID software to quantify vegetative area based on the Normalized Difference Vegetation Index. The prediction model developed from the first field explained 50-70% (R Square) of biomass variation in the second field by incorporating four features from UAV images: vegetative area, plant height, Normalized Green-Red Difference Index, and Normalized Difference Red Edge Index. This result suggests that UAV-based, high-throughput phenotyping could be used to improve the efficiency of the biomass selection process in alfalfa breeding programs.
| S-EPMC7870825 | biostudies-literature
Project description:Unmanned aerial vehicles have an immense capacity for remote imaging of plants in agronomic field research trials. Traits extracted from the plots can explain development of the plants coverage, growth, flowering status, and related phenomenon. An important prerequisite step to obtain such information is to find the exact position of plots to extract them from an orthomosaic image. Extraction of plots using tools which assume a uniform spacing is often erroneous because the plots may neither be perfectly aligned nor equally distributed in a field. A novel approach is proposed which uses image-based optimization algorithm to find the alignment of plots. The method begins with a uniformly spaced grid of plots which is iteratively aligned with regions of high vegetation index, i.e., the underlying plots. The approach is validated and tested on two different orthomosaic images of fields containing wheat plots with simulated and real alignment problems, respectively. The result of alignment is compared to manually located ground truth position of plots and the errors are quantitatively analyzed. The effectiveness of the proposed method is confirmed in accurately estimating the phenotypic trait of canopy coverage compared to the common methods of extraction from uniform grids or trimmed grids. The software developed in this study is available from SourceForge, https://sourceforge.net/projects/phenalysis/.
| S-EPMC6548842 | biostudies-literature
Project description:BackgroundTraining deep learning (DL) models to automatically recognize diseases in nasopharyngeal MRI is a challenging task, and optimizing the performance of DL models is difficult.PurposeTo develop a method of training anatomical partition-based DL model which integrates knowledge of clinical anatomical regions in otorhinolaryngology to automatically recognize diseases in nasopharyngeal MRI.Study typeSingle-center retrospective study.PopulationA total of 2485 patients with nasopharyngeal diseases (age range 14-82 years, female, 779[31.3%]) and 600 people with normal nasopharynx (age range 18-78 years, female, 281[46.8%]) were included.Sequence3.0 T; T2WI fast spin-echo sequence.AssessmentFull images (512 × 512) of 3085 patients constituted 100% of the dataset, 50% and 25% of which were randomly retained as two new datasets. Two new series of images (seg112 image [112 × 112] and seg224 image [224 × 224]) were automatically generated by a segmentation model. Four pretrained neural networks for nasopharyngeal diseases classification were trained under the nine datasets (full image, seg112 image, and seg224 image, each with 100% dataset, 50% dataset, and 25% dataset).Statistical testsThe receiver operating characteristic curve was used to evaluate the performance of the models. Analysis of variance was used to compare the performance of the models built with different datasets. Statistical significance was set at P < 0.05.ResultsWhen the 100% dataset was used for training, the performances of the models trained with the seg112 images (average area under the curve [aAUC] 0.949 ± 0.052), seg224 images (aAUC 0.948 ± 0.053), and full images (aAUC 0.935 ± 0.053) were similar (P = 0.611). When the 25% dataset was used for training, the mean aAUC of the models that were trained with seg112 images (0.823 ± 0.116) and seg224 images (0.765 ± 0.155) was significantly higher than the models that were trained with full images (0.640 ± 0.154).Data conclusionThe proposed method can potentially improve the performance of the DL model for automatic recognition of diseases in nasopharyngeal MRI.Level of evidence4 TECHNICAL EFFICACY STAGE: 1.
| S-EPMC9541866 | biostudies-literature
Project description:Target identification for tractography studies requires solid anatomical knowledge validated by an extensive literature review across species for each seed structure to be studied. Manual literature review to identify targets for a given seed region is tedious and potentially subjective. Therefore, complementary approaches would be useful. We propose to use text-mining models to automatically suggest potential targets from the neuroscientific literature, full-text articles and abstracts, so that they can be used for anatomical connection studies and more specifically for tractography. We applied text-mining models to three structures: two well-studied structures, since validated deep brain stimulation targets, the internal globus pallidus and the subthalamic nucleus and, the nucleus accumbens, an exploratory target for treating psychiatric disorders. We performed a systematic review of the literature to document the projections of the three selected structures and compared it with the targets proposed by text-mining models, both in rat and primate (including human). We ran probabilistic tractography on the nucleus accumbens and compared the output with the results of the text-mining models and literature review. Overall, text-mining the literature could find three times as many targets as two man-weeks of curation could. The overall efficiency of the text-mining against literature review in our study was 98% recall (at 36% precision), meaning that over all the targets for the three selected seeds, only one target has been missed by text-mining. We demonstrate that connectivity for a structure of interest can be extracted from a very large amount of publications and abstracts. We believe this tool will be useful in helping the neuroscience community to facilitate connectivity studies of particular brain regions. The text mining tools used for the study are part of the HBP Neuroinformatics Platform, publicly available at http://connectivity-brainer.rhcloud.com/.
| S-EPMC4445321 | biostudies-literature
Project description:To understand the state and trends in biodiversity beyond the scope of monitoring programs, biodiversity indicators must be comparable across inventories. Species richness (SR) is one of the most widely used biodiversity indicators. However, as SR increases with the size of the area sampled, inventories using different plot sizes are hardly comparable. This study aims at producing a methodological framework that enables SR comparisons across plot-based inventories with differing plot sizes. We used National Forest Inventory (NFI) data from Norway, Slovakia, Spain, and Switzerland to build sample-based rarefaction curves by randomly incrementally aggregating plots, representing the relationship between SR and sampled area. As aggregated plots can be far apart and subject to different environmental conditions, we estimated the amount of environmental heterogeneity (EH) introduced in the aggregation process. By correcting for this EH, we produced adjusted rarefaction curves mimicking the sampling of environmentally homogeneous forest stands, thus reducing the effect of plot size and enabling reliable SR comparisons between inventories. Models were built using the Conway-Maxell-Poisson distribution to account for the underdispersed SR data. Our method successfully corrected for the EH introduced during the aggregation process in all countries, with better performances in Norway and Switzerland. We further found that SR comparisons across countries based on the country-specific NFI plot sizes are misleading, and that our approach offers an opportunity to harmonize pan-European SR monitoring. Our method provides reliable and comparable SR estimates for inventories that use different plot sizes. Our approach can be applied to any plot-based inventory and count data other than SR, thus allowing a more comprehensive assessment of biodiversity across various scales and ecosystems.
| S-EPMC9189332 | biostudies-literature
Project description:Depression is one of the significant mental health issues affecting all age groups globally. While it has been widely recognized to be one of the major disease burdens in populations, complexities in definitive diagnosis present a major challenge. Usually, trained psychologists utilize conventional methods including individualized interview assessment and manually administered PHQ-8 scoring. However, heterogeneity in symptomatic presentations, which span somatic to affective complaints, impart substantial subjectivity in its diagnosis. Diagnostic accuracy is further compounded by the cross-sectional nature of sporadic assessment methods during physician-office visits, especially since depressive symptoms/severity may evolve over time. With widespread acceptance of smart wearable devices and smartphones, passive monitoring of depression traits using behavioral signals such as speech presents a unique opportunity as companion diagnostics to assist the trained clinicians in objective assessment over time. Therefore, we propose a framework for automated depression classification leveraging alterations in speech patterns in the well documented and extensively studied DAIC-WOZ depression dataset. This novel tensor-based approach requires a substantially simpler implementation architecture and extracts discriminative features for depression recognition with high f1 score and accuracy. We posit that such algorithms, which use significantly less compute load would allow effective onboard deployment in wearables for improve diagnostics accuracy and real-time monitoring of depressive disorders.
| S-EPMC9371305 | biostudies-literature
Project description:Background: Williams-Beuren syndrome (WBS) is a rare genetic syndrome with a characteristic "elfin" facial gestalt. The "elfin" facial characteristics include a broad forehead, periorbital puffiness, flat nasal bridge, short upturned nose, wide mouth, thick lips, and pointed chin. Recently, deep convolutional neural networks (CNNs) have been successfully applied to facial recognition for diagnosing genetic syndromes. However, there is little research on WBS facial recognition using deep CNNs. Objective: The purpose of this study was to construct an automatic facial recognition model for WBS diagnosis based on deep CNNs. Methods: The study enrolled 104 WBS children, 91 cases with other genetic syndromes, and 145 healthy children. The photo dataset used only one frontal facial photo from each participant. Five face recognition frameworks for WBS were constructed by adopting the VGG-16, VGG-19, ResNet-18, ResNet-34, and MobileNet-V2 architectures, respectively. ImageNet transfer learning was used to avoid over-fitting. The classification performance of the facial recognition models was assessed by five-fold cross validation, and comparison with human experts was performed. Results: The five face recognition frameworks for WBS were constructed. The VGG-19 model achieved the best performance. The accuracy, precision, recall, F1 score, and area under curve (AUC) of the VGG-19 model were 92.7 ± 1.3%, 94.0 ± 5.6%, 81.7 ± 3.6%, 87.2 ± 2.0%, and 89.6 ± 1.3%, respectively. The highest accuracy, precision, recall, F1 score, and AUC of human experts were 82.1, 65.9, 85.6, 74.5, and 83.0%, respectively. The AUCs of each human expert were inferior to the AUCs of the VGG-16 (88.6 ± 3.5%), VGG-19 (89.6 ± 1.3%), ResNet-18 (83.6 ± 8.2%), and ResNet-34 (86.3 ± 4.9%) models. Conclusions: This study highlighted the possibility of using deep CNNs for diagnosing WBS in clinical practice. The facial recognition framework based on VGG-19 could play a prominent role in WBS diagnosis. Transfer learning technology can help to construct facial recognition models of genetic syndromes with small-scale datasets.
| S-EPMC8170407 | biostudies-literature
Project description:Artificial intelligence (AI) technology is widely applied in different medical fields, including the diagnosis of various diseases on the basis of facial phenotypes, but there is no evaluation or quantitative synthesis regarding the performance of artificial intelligence. Here, for the first time, we summarized and quantitatively analyzed studies on the diagnosis of heterogeneous diseases on the basis on facial features. In pooled data from 20 systematically identified studies involving 7 single diseases and 12,557 subjects, quantitative random-effects models revealed a pooled sensitivity of 89% (95% CI 82% to 93%) and a pooled specificity of 92% (95% CI 87% to 95%). A new index, the facial recognition intensity (FRI), was established to describe the complexity of the association of diseases with facial phenotypes. Meta-regression revealed the important contribution of FRI to heterogeneous diagnostic accuracy (p = 0.021), and a similar result was found in subgroup analyses (p = 0.003). An appropriate increase in the training size and the use of deep learning models helped to improve the diagnostic accuracy for diseases with low FRI, although no statistically significant association was found between accuracy and photographic resolution, training size, AI architecture, and number of diseases. In addition, a novel hypothesis is proposed for universal rules in AI performance, providing a new idea that could be explored in other AI applications.
| S-EPMC8621146 | biostudies-literature
Project description:This work reports the design and validation of an innovative automatic photo-cross-linking device for robotic-based in situ bioprinting. Photo-cross-linking is the most promising polymerization technique when considering biomaterial deposition directly inside a physiological environment, typical of the in situ bioprinting approach. The photo-cross-linking device was designed for the IMAGObot platform, a 5-degree-of-freedom robot re-engineered for in situ bioprinting applications. The system consists of a syringe pump extrusion module equipped with eight light-emitting diodes (LEDs) with a 405 nm wavelength. The hardware and software of the robot were purposely designed to manage the LEDs switching on and off during printing. To minimize the light exposure of the needle, thus avoiding its clogging, only the LEDs opposite the printing direction are switched on to irradiate the newly deposited filament. Moreover, the LED system can be adjusted in height to modulate substrate exposure. Different scaffolds were bioprinted using a GelMA-based hydrogel, varying the printing speed and light distance from the bed, and were characterized in terms of swelling and mechanical properties, proving the robustness of the photo-cross-linking system in various configurations. The system was finally validated onto anthropomorphic phantoms (i.e., a human humerus head and a human hand with defects) featuring complex nonplanar surfaces. The designed system was successfully used to fill these anatomical defects, thus resulting in a promising solution for in situ bioprinting applications.
| S-EPMC10716819 | biostudies-literature
Project description:BackgroundDetection of circulating tumor cells (CTCs) is a promising technology in tumor management; however, the slow development of CTC identification methods hinders their clinical utility. Moreover, CTC detection is currently challenging owing to major issues such as isolation and correct identification. To improve the identification efficiency of glioma CTCs, we developed a karyoplasmic ratio (KR)-based identification method and constructed an automatic recognition algorithm. We also intended to determine the correlation between high-KR CTC and patients' clinical characteristics.MethodsCTCs were isolated from the peripheral blood samples of 68 glioma patients and analyzed using DNA-seq and immunofluorescence staining. Subsequently, the clinical information of both glioma patients and matched individuals was collected for analyses. ROC curve was performed to evaluate the efficiency of the KR-based identification method. Finally, CTC images were captured and used for developing a CTC recognition algorithm.ResultsKR was a better parameter than cell size for identifying glioma CTCs. We demonstrated that low CTC counts were independently associated with isocitrate dehydrogenase (IDH) mutations (p = 0.024) and 1p19q co-deletion status (p = 0.05), highlighting its utility in predicting oligodendroglioma (area under the curve = 0.770). The accuracy, sensitivity, and specificity of our algorithm were 93.4%, 81.0%, and 97.4%, respectively, whereas the precision and F1 score were 90.9% and 85.7%, respectively.ConclusionOur findings remarkably increased the efficiency of detecting glioma CTCs and revealed a correlation between CTC counts and patients' clinical characteristics. This will allow researchers to further investigate the clinical utility of CTCs. Moreover, our automatic recognition algorithm can maintain high precision in the CTC identification process, shorten the time and cost, and significantly reduce the burden on clinicians.
| S-EPMC9137408 | biostudies-literature