Dataset Information

An Automatic Field Plot Extraction Method From Aerial Orthomosaic Images.

ABSTRACT: Unmanned aerial vehicles have an immense capacity for remote imaging of plants in agronomic field research trials. Traits extracted from the plots can explain development of the plants coverage, growth, flowering status, and related phenomenon. An important prerequisite step to obtain such information is to find the exact position of plots to extract them from an orthomosaic image. Extraction of plots using tools which assume a uniform spacing is often erroneous because the plots may neither be perfectly aligned nor equally distributed in a field. A novel approach is proposed which uses image-based optimization algorithm to find the alignment of plots. The method begins with a uniformly spaced grid of plots which is iteratively aligned with regions of high vegetation index, i.e., the underlying plots. The approach is validated and tested on two different orthomosaic images of fields containing wheat plots with simulated and real alignment problems, respectively. The result of alignment is compared to manually located ground truth position of plots and the errors are quantitatively analyzed. The effectiveness of the proposed method is confirmed in accurately estimating the phenotypic trait of canopy coverage compared to the common methods of extraction from uniform grids or trimmed grids. The software developed in this study is available from SourceForge, https://sourceforge.net/projects/phenalysis/.

SUBMITTER: Khan Z

PROVIDER: S-EPMC6548842 | biostudies-literature | 2019

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

An Automatic Field Plot Extraction Method From Aerial Orthomosaic Images.

Khan Zohaib Z Miklavcic Stanley J SJ

Frontiers in plant science 20190529

Unmanned aerial vehicles have an immense capacity for remote imaging of plants in agronomic field research trials. Traits extracted from the plots can explain development of the plants coverage, growth, flowering status, and related phenomenon. An important prerequisite step to obtain such information is to find the exact position of plots to extract them from an orthomosaic image. Extraction of plots using tools which assume a uniform spacing is often erroneous because the plots may neither be ...[more]

PMID: 31191586

Similar Datasets

Project description:X-ray computed tomography (CT) imaging of the brain is commonly used in diagnostic settings. Although CT scans are primarily used in clinical practice, they are increasingly used in research. A fundamental processing step in brain imaging research is brain extraction - the process of separating the brain tissue from all other tissues. Methods for brain extraction have either been 1) validated but not fully automated, or 2) fully automated and informally proposed, but never formally validated.To systematically analyze and validate the performance of FSL's brain extraction tool (BET) on head CT images of patients with intracranial hemorrhage. This was done by comparing the manual gold standard with the results of several versions of automatic brain extraction and by estimating the reliability of automated segmentation of longitudinal scans. The effects of the choice of BET parameters and data smoothing is studied and reported.All images were thresholded using a 0-100 Hounsfield unit (HU) range. In one variant of the pipeline, data were smoothed using a 3-dimensional Gaussian kernel (?=1mm(3)) and re-thresholded to 0-100HU; in the other, data were not smoothed. BET was applied using 1 of 3 fractional intensity (FI) thresholds: 0.01, 0.1, or 0.35 and any holes in the brain mask were filled. For validation against a manual segmentation, 36 images from patients with intracranial hemorrhage were selected from 19 different centers from the MISTIE (Minimally Invasive Surgery plus recombinant-tissue plasminogen activator for Intracerebral Evacuation) stroke trial. Intracranial masks of the brain were manually created by one expert CT reader. The resulting brain tissue masks were quantitatively compared to the manual segmentations using sensitivity, specificity, accuracy, and the Dice Similarity Index (DSI). Brain extraction performance across smoothing and FI thresholds was compared using the Wilcoxon signed-rank test. The intracranial volume (ICV) of each scan was estimated by multiplying the number of voxels in the brain mask by the dimensions of each voxel for that scan. From this, we calculated the ICV ratio comparing manual and automated segmentation: ICVautomated/ICVmanual. To estimate the performance in a large number of scans, brain masks were generated from the 6 BET pipelines for 1095 longitudinal scans from 129 patients. Failure rates were estimated from visual inspection. ICV of each scan was estimated and an intraclass correlation (ICC) was estimated using a one-way ANOVA.Smoothing images improves brain extraction results using BET for all measures except specificity (all p<0.01, uncorrected), irrespective of the FI threshold. Using an FI of 0.01 or 0.1 performed better than 0.35. Thus, all reported results refer only to smoothed data using an FI of 0.01 or 0.1. Using an FI of 0.01 had a higher median sensitivity (0.9901) than an FI of 0.1 (0.9884, median difference: 0.0014, p<0.001), accuracy (0.9971 vs. 0.9971; median difference: 0.0001, p<0.001), and DSI (0.9895 vs. 0.9894; median difference: 0.0004, p<0.001) and lower specificity (0.9981 vs. 0.9982; median difference: -0.0001, p<0.001). These measures are all very high indicating that a range of FI values may produce visually indistinguishable brain extractions. Using smoothed data and an FI of 0.01, the mean (SD) ICV ratio was 1.002 (0.008); the mean being close to 1 indicates the ICV estimates are similar for automated and manual segmentation. In the 1095 longitudinal scans, this pipeline had a low failure rate (5.2%) and the ICC estimate was high (0.929, 95% CI: 0.91, 0.945) for successfully extracted brains.BET performs well at brain extraction on thresholded, 1mm(3) smoothed CT images with an FI of 0.01 or 0.1. Smoothing before applying BET is an important step not previously discussed in the literature. Analysis code is provided.

Project description:BackgroundIn recent years, high-throughput microscopy has emerged as a powerful tool to analyze cellular dynamics in an unprecedentedly high resolved manner. The amount of data that is generated, for example in long-term time-lapse microscopy experiments, requires automated methods for processing and analysis. Available software frameworks are well suited for high-throughput processing of fluorescence images, but they often do not perform well on bright field image data that varies considerably between laboratories, setups, and even single experiments.ResultsIn this contribution, we present a fully automated image processing pipeline that is able to robustly segment and analyze cells with ellipsoid morphology from bright field microscopy in a high-throughput, yet time efficient manner. The pipeline comprises two steps: (i) Image acquisition is adjusted to obtain optimal bright field image quality for automatic processing. (ii) A concatenation of fast performing image processing algorithms robustly identifies single cells in each image. We applied the method to a time-lapse movie consisting of ∼315,000 images of differentiating hematopoietic stem cells over 6 days. We evaluated the accuracy of our method by comparing the number of identified cells with manual counts. Our method is able to segment images with varying cell density and different cell types without parameter adjustment and clearly outperforms a standard approach. By computing population doubling times, we were able to identify three growth phases in the stem cell population throughout the whole movie, and validated our result with cell cycle times from single cell tracking.ConclusionsOur method allows fully automated processing and analysis of high-throughput bright field microscopy data. The robustness of cell detection and fast computation time will support the analysis of high-content screening experiments, on-line analysis of time-lapse experiments as well as development of methods to automatically track single-cell genealogies.

Project description:BackgroundNew terminology continuously enters the biomedical literature. How can curators identify new terms that can be added to existing nomenclatures? The most direct method, and one that has served well, involves reading the current literature. The scholarly curator adds new terms as they are encountered. Present-day scholars are severely challenged by the enormous volume of biomedical literature. Curators of medical nomenclatures need computational assistance if they hope to keep their terminologies current. The purpose of this paper is to describe a method of rapidly extracting new, candidate terms from huge volumes of biomedical text. The resulting lists of terms can be quickly reviewed by curators and added to nomenclatures, if appropriate. The candidate term extractor uses a variation of the previously described doublet coding method. The algorithm, which operates on virtually any nomenclature, derives from the observation that most terms within a knowledge domain are composed entirely of word combinations found in other terms from the same knowledge domain. Terms can be expressed as sequences of overlapping word doublets that have more specific meaning than the individual words that compose the term. The algorithm parses through text, finding contiguous sequences of word doublets that are known to occur somewhere in the reference nomenclature. When a sequence of matching word doublets is encountered, it is compared with whole terms already included in the nomenclature. If the doublet sequence is not already in the nomenclature, it is extracted as a candidate new term. Candidate new terms can be reviewed by a curator to determine if they should be added to the nomenclature. An implementation of the algorithm is demonstrated, using a corpus of published abstracts obtained through the National Library of Medicine's PubMed query service and using "The developmental lineage classification and taxonomy of neoplasms" as a reference nomenclature.ResultsA 31+ Megabyte corpus of pathology journal abstracts was parsed using the doublet extraction method. This corpus consisted of 4,289 records, each containing an abstract title. The total number of words included in the abstract titles was 50,547. New candidate terms for the nomenclature were automatically extracted from the titles of abstracts in the corpus. Total execution time on a desktop computer with CPU speed of 2.79 GHz was 2 seconds. The resulting output consisted of 313 new candidate terms, each consisting of concatenated doublets found in the reference nomenclature. Human review of the 313 candidate terms yielded a list of 285 terms approved by a curator. A final automatic extraction of duplicate terms yielded a final list of 222 new terms (71% of the original 313 extracted candidate terms) that could be added to the reference nomenclature.ConclusionThe doublet method for automatically extracting candidate nomenclature terms can be used to quickly find new terms from vast amounts of text. The method can be immediately adapted for virtually any text and any nomenclature. An implementation of the algorithm, in the Perl programming language, is provided with this article.

Dataset Information

An Automatic Field Plot Extraction Method From Aerial Orthomosaic Images.

Publications

An Automatic Field Plot Extraction Method From Aerial Orthomosaic Images.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets