Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Dislocation loop formation and growth under in situ laser and/or electron irradiation.

ABSTRACT: Vacancies and interstitial atoms are primary lattice (point) defects that cause observable microstructural changes, such as the formation of dislocation loops and voids in crystalline solids. These defects' diffusion properties determine the phase stability and environmental resistibility of macroscopic materials under ambient conditions. Although in situ methods have been proposed for measuring the diffusion energy of point defects, direct measurement has been limited. In this study, we propose an alternative in situ method to measure the activation energy for vacancy migration under laser irradiation using a pulsed laser beam from a laser-equipped high-voltage electron microscope (laser-HVEM). We made in situ observations that revealed the formation and growth of vacancy dislocation loops in an austenitic stainless steel during laser irradiation. These loops continued to grow when thermal annealing was performed after laser irradiation at the same temperature. We anticipate that laser-HVEM will provide a new method for investigating lattice defects.

SUBMITTER: Yang Z

PROVIDER: S-EPMC3240952 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

In-Situ Electron Channeling Contrast Imaging under Tensile Loading: Residual Stress, Dislocation Motion, and Slip Line Formation.

Project description:Elastoplastic phenomena, such as plastic deformation and failure, are multi-scale, deformation-path-dependent, and mechanical-field-sensitive problems associated with metals. Accordingly, visualization of the microstructural deformation path under a specific mechanical field is challenging for the elucidation of elastoplastic phenomena mechanisms. To overcome this problem, a dislocation-resolved in-situ technique for deformation under mechanically controllable conditions is required. Thus, we attempted to apply electron channeling contrast imaging (ECCI) under tensile loading, which enabled the detection of lattice defect motions and the evolution of elastic strain fields in bulk specimens. Here, we presented the suitability of ECCI as an in-situ technique with dislocation-detectable spatial resolution. In particular, the following ECCI-visualized plasticity-related phenomena were observed: (1) pre-deformation-induced residual stress and its disappearance via subsequent reloading, (2) heterogeneous dislocation motion during plastic relaxation, and (3) planar surface relief formation via loading to a higher stress.

| S-EPMC7021723 | biostudies-literature

Silicon nanocrystal growth under irradiation of electron beam.

Project description:In our experiment, it was observed that silicon nanocrystal rapidly grows with irradiation of electron beam on amorphous silicon film prepared by pulsed laser deposition, and shape of silicon nanocrystal is usually sphere in smaller nanoscale with less exposure time under electron beam, in which the quantum dots are prepared in nanoscale near 3 nm. In the electron interaction process, it was investigated that the various crystals structures in different orientations occur in the same time and the condensed structures of silicon nanocrystal are changed with different impurity atoms in silicon film.

| S-EPMC4660392 | biostudies-other

The irradiation effect of a simultaneous laser and electron dual-beam on void formation.

Project description:Randomly distributed lattice point defects such as supersaturated vacancies (SVs) and Frenkel-pairs (FPs, an interstitial and a vacancy) can be simultaneously introduced into the crystal by energetic beam irradiation in outer space and/or nuclear reactors, but their behavior has not been fully understood. Using a high-voltage electron microscope equipped with a laser (laser-HVEM), we show the striking effects of simultaneous laser-electron (photon-electron) dual-beam irradiation on void formation. Our results reveal that during laser-electron sequential irradiation, pre-laser irradiation enhanced void nucleation and subsequent electron irradiation enhanced void growth. However, the laser-electron dual-beam irradiation was analyzed to depress void swelling remarkably because the recombination of SVs and interstitials was enhanced. The results provide insight into the mechanism underlying the dual-beam radiation-induced depression of void swelling in solids.

| S-EPMC3563032 | biostudies-literature

Development of pink-beam 4D phase CT for in-situ observation of polymers under infrared laser irradiation.

Project description:Four-dimensional phase computed tomography (4D phase CT) by an X-ray Talbot interferometer (XTI) with white synchrotron radiation has ever been demonstrated at a temporal resolution of about 1?s for soft-matter samples. However, the radiation damage to samples caused by white synchrotron radiation occasionally hampers our understanding of the sample dynamical properties. Based on the fact that XTI functions with X-rays of a bandwidth up to ca. 10% with performance comparable to that by monochromatic X-rays, filtering white synchrotron radiation to generate a 'pink-beam' of a 10% bandwidth is effective to reduce radiation damage without degrading the image quality and temporal resolution. We have therefore developed pink-beam 4D phase CT at SPring-8, Japan by installing a multilayer mirror with a 10% bandwidth and a 25?keV central photon energy. XTI optimal at this photon energy was built downstream, and a CMOS-based X-ray detector was used to achieve fast image acquisitions with an exposure time of 1?ms (or 0.5?ms) per moiré image. The resultant temporal resolution of pink-beam 4D phase CT was 2?s (1?s). We applied the pink-beam 4D phase CT to in-situ observation of polypropylene, poly(methyl methacrylate), and polycarbonate under infrared laser irradiation (1064?nm). The dynamics of melting, bubbling, and ashing were successfully visualized in 3D movies without problematic radiation damage by synchrotron radiation.

| S-EPMC6531456 | biostudies-literature

In-situ synchrotron X-ray diffraction data for the dynamic reaction processes between titanium and air under laser irradiation.

Project description:This article presents data related to the research article entitled "Diffusion of oxygen and nitrogen into titanium under laser irradiation in air" [1]. When irradiated with varying laser parameters under ambient air, titanium surfaces are observed to exhibit differing colors. To better understand this phenomenon, the dynamic reaction steps between titanium and air under laser irradiation were investigated with in-situ synchrotron X-ray diffraction method. With a programmed laser profile, a set of diffraction patterns were collected by a 2D detector and then analyzed with the program FIT2D. Based on the data, the detailed high-temperature reactions between titanium and air during laser irradiation were clearly revealed. The presented raw in-situ synchrotron X-ray diffraction data can be reused for the further insights of laser surface modification of titanium in air, or for discovering the optimal laser conditions for industrial decoration or medical applications of titanium.

| S-EPMC7187328 | biostudies-literature

Grafting Polytetrafluoroethylene Micropowder via in Situ Electron Beam Irradiation-Induced Polymerization.

Project description:Decreasing the surface energy of polyacrylate-based materials is important especially in embossed holography, but current solutions typically involve high-cost synthesis or encounter compatibility problems. Herein, we utilize the grafting of polytetrafluoroethylene (PTFE) micropowder with poly (methyl methacrylate) (PMMA). The grafting reaction is implemented via in situ electron beam irradiation-induced polymerization in the presence of fluorinated surfactants, generating PMMA grafted PTFE micropowder (PMMA⁻g⁻PTFE). The optimal degree of grafting (DG) is 17.8%. With the incorporation of PMMA⁻g⁻PTFE, the interfacial interaction between polyacrylate and PTFE is greatly improved, giving rise to uniform polyacrylate/PMMA⁻g⁻PTFE composites with a low surface energy. For instance, the loading content of PMMA⁻g⁻PTFE in polyacrylate is up to 16 wt %, leading to an increase of more than 20 degrees in the water contact angle compared to the pristine sample. This research paves a way to generate new polyacrylate-based films for embossed holography.

| S-EPMC6415420 | biostudies-literature

Photothermal Response of Hollow Gold Nanorods under Femtosecond Laser Irradiation.

Project description:The photothermal kinetics of hollow gold nanorod (HGNR) under femtosecond laser irradiation are studied numerically with finite-element methods and a two-temperature model. Compared with solid gold nanorod (SGNR) with the same aspect ratio (AR), the localized surface plasmon resonance (LSPR) peak of HGNR can be red-shifted to the second near-infrared window, and the absorption cross-section of HGNR can be larger than that of SGNR. In addition, under the influence of an applied numerically electromagnetic field (simulated femtosecond laser irradiation), the heat generated by HGNR makes the temperature rise of the surrounding medium faster and higher. Compared with SGNR with the same resonance wavelength, HGNR has a slightly smaller absorption cross-section but can achieve a higher temperature rise of the external medium. In addition, the laser energy, required to achieve the critical temperature for selective photothermal damage of tumor cells, is also significantly reduced. Moreover, with the same incident laser energy, the decreasing of HGNR shell thickness leads to an increase of the temperature rise of the external medium, while the change of femtosecond laser pulse width will not significantly change the temperature rise of its lattice and the external medium. In short, this study aims to provide some useful insights for the applications of HGNR in photothermal tumor therapy.

| S-EPMC6566344 | biostudies-literature

In Situ Local Oxidation of SnO Induced by Laser Irradiation: A Stability Study.

Project description:In this work, semiconductor tin oxide (II) (SnO) nanoparticles and plates were synthesized at room conditions via a hydrolysis procedure. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the high crystallinity of the as-synthesized romarchite SnO nanoparticles with dimensions ranging from 5 to 16 nm. The stability of the initial SnO and the controlled oxidation to SnO2 was studied based on either thermal treatments or controlled laser irradiation using a UV and a red laser in a confocal microscope. Thermal treatments induced the oxidation from SnO to SnO2 without formation of intermediate SnOx, as confirmed by thermodiffraction measurements, while by using UV or red laser irradiation the transition from SnO to SnO2 was controlled, assisted by formation of intermediate Sn3O4, as confirmed by Raman spectroscopy. Photoluminescence and Raman spectroscopy as a function of the laser excitation source, the laser power density, and the irradiation duration were analyzed in order to gain insights in the formation of SnO2 from SnO. Finally, a tailored spatial SnO/SnO2 micropatterning was achieved by controlled laser irradiation with potential applicability in optoelectronics and sensing devices.

| S-EPMC8070038 | biostudies-literature

In Situ Atomic-Scale Observation of Silver Oxidation Triggered by Electron Beam Irradiation.

Project description:Understanding the mechanism of metal oxidation processes is critical for maintaining the desired properties of metals and catalysts, as well as for designing advanced materials. In this work, we investigate the electron beam induced oxidation of silver using in situ transmission electron microscopy. The additions of Ag-O columns on {111} and {110} planes were captured with atomic resolution. Interestingly, oscillatory growth on {110} planes was observed, which resulted from the double effect of electron beam irradiation. It was found that not only thermodynamic factors but also kinetic factors played significant roles in morphology evolutions. These results can facilitate the fundamental understanding of the oxidation process of Ag and provide a promising approach for the fabrication of desired nanostructures.

| S-EPMC8073916 | biostudies-literature

The fragmentation mechanism of gold nanoparticles in water under femtosecond laser irradiation.

Project description:Plasmonic nanoparticles in aqueous solution have long been known to fragment under irradiation with intense ultrafast laser pulses, creating progeny particles with diameters of a few nanometers. However, the mechanism of this process is still intensely debated, despite numerous experimental and theoretical studies. Here, we use in situ electron microscopy to directly observe the femtosecond laser-induced fragmentation of gold nanoparticles in water, revealing that the process occurs through ejection of individual progeny particles. Our observations suggest that the fragmentation mechanism involves Coulomb fission, which occurs as the femtosecond laser pulses ionize and melt the gold nanoparticle, causing it to eject a highly charged progeny droplet. Subsequent Coulomb fission events, accompanied by solution-mediated etching and growth processes, create complex fragmentation patterns that rapidly fluctuate under prolonged irradiation. Our study highlights the complexity of the interaction of plasmonic nanoparticles with ultrafast laser pulses and underlines the need for in situ observations to unravel the mechanisms of related phenomena.

| S-EPMC8439145 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data