Dataset Information

Direct quantitative analysis of HCV RNA by atomic force microscopy without labeling or amplification.

ABSTRACT: Force-based atomic force microscopy (AFM) was used to detect HCV (hepatitis C virus) RNA directly and to quantitatively analyse it without the need for reverse transcription or amplification. Capture and detection DNA probes were designed. The former was spotted onto a substrate with a conventional microarrayer, and the latter was immobilized on an AFM probe. To control the spacing between the immobilized DNAs on the surface, dendron self-assembly was employed. Force-distance curves showed that the mean force of the specific unbinding events was 32 ± 5 pN, and the hydrodynamic distance of the captured RNA was 30-60 nm. Adhesion force maps were generated with criteria including the mean force value, probability of obtaining the specific curves and hydrodynamic distance. The maps for the samples whose concentrations ranged from 0.76 fM to 6.0 fM showed that cluster number has a linear relationship with RNA concentration, while the difference between the observed number and the calculated one increased at low concentrations. Because the detection limit is expected to be enhanced by a factor of 10 000 when a spot of 1 micron diameter is employed, it is believed that HCV RNA of a few copy numbers can be detected by the use of AFM.

SUBMITTER: Jung YJ

PROVIDER: S-EPMC3526272 | biostudies-literature | 2012 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Direct quantitative analysis of HCV RNA by atomic force microscopy without labeling or amplification.

Jung Yu Jin YJ Albrecht Jeffrey A JA Kwak Ju-Won JW Park Joon Won JW

Nucleic acids research 20121016 22

Force-based atomic force microscopy (AFM) was used to detect HCV (hepatitis C virus) RNA directly and to quantitatively analyse it without the need for reverse transcription or amplification. Capture and detection DNA probes were designed. The former was spotted onto a substrate with a conventional microarrayer, and the latter was immobilized on an AFM probe. To control the spacing between the immobilized DNAs on the surface, dendron self-assembly was employed. Force-distance curves showed that ...[more]

PMID: 23074195

Similar Datasets

Project description:We present a magnetic force-based direct drive modulation method to measure local nano-rheological properties of soft materials across a broad frequency range (10 Hz to 2 kHz) using colloid-attached atomic force microscope (AFM) probes in liquid. The direct drive method enables artefact-free measurements over several decades of excitation frequency, and avoids the need to evaluate medium-induced hydrodynamic drag effects. The method was applied to measure the local mechanical properties of polyacrylamide hydrogels. The frequency-dependent storage stiffness, loss stiffness, and loss tangent (tan??) were quantified for hydrogels having high and low crosslinking densities by measuring the amplitude and the phase response of the cantilever while the colloid was in contact with the hydrogel. The frequency bandwidth was further expanded to lower effective frequencies (0.1 Hz to 10 Hz) by obtaining force-displacement (FD) curves. Slow FD measurements showed a recoverable but highly hysteretic response, with the contact mechanical behaviour dependent on the loading direction: approach curves showed Hertzian behaviour while retraction curves fit the JKR contact mechanics model well into the adhesive regime, after which multiple detachment instabilities occurred. Using small amplitude dynamic modulation to explore faster rates, the load dependence of the storage stiffness transitioned from Hertzian to a dynamic punch-type (constant contact area) model, indicating significant influence of material dissipation coupled with adhesion. Using the appropriate contact model across the full frequency range measured, the storage moduli were found to remain nearly constant until an increase began near ?100 Hz. The softer gels' storage modulus increased from 7.9 ± 0.4 to 14.5 ± 2.1 kPa (?85%), and the stiffer gels' storage modulus increased from 16.3 ± 1.1 to 31.7 ± 5.0 kPa (?95%). This increase at high frequencies may be attributed to a contribution from solvent confinement in the hydrogel (poroelasticity). The storage moduli measured by both macro-rheometry and AFM FD curves were comparable to those measured using the modulation method at their overlapping frequencies (10-25 Hz). In all cases, care was taken to ensure the contact mechanics models were applied within the important limit of small relative deformations. This study thus highlights possible transitions in the probe-material contact mechanical behaviour for soft matter, especially when the applied strain rates and the material relaxation rates become comparable. In particular, at low frequencies, the modulus follows Hertzian contact mechanics, while at high frequencies adhesive contact is well represented by punch-like behaviour. More generally, use of the Hertz model on hydrogels at high loading rates, at high strains, or during the retraction portion of FD curves, leads to significant errors in the calculated moduli.

Dataset Information

Direct quantitative analysis of HCV RNA by atomic force microscopy without labeling or amplification.

Publications

Direct quantitative analysis of HCV RNA by atomic force microscopy without labeling or amplification.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets