Dataset Information

A sample design for globally consistent biomass estimation using lidar data from the Geoscience Laser Altimeter System (GLAS).

ABSTRACT:

Unlabelled

Background

Lidar height data collected by the Geosciences Laser Altimeter System (GLAS) from 2002 to 2008 has the potential to form the basis of a globally consistent sample-based inventory of forest biomass. GLAS lidar return data were collected globally in spatially discrete full waveform "shots," which have been shown to be strongly correlated with aboveground forest biomass. Relationships observed at spatially coincident field plots may be used to model biomass at all GLAS shots, and well-established methods of model-based inference may then be used to estimate biomass and variance for specific spatial domains. However, the spatial pattern of GLAS acquisition is neither random across the surface of the earth nor is it identifiable with any particular systematic design. Undefined sample properties therefore hinder the use of GLAS in global forest sampling.

Results

We propose a method of identifying a subset of the GLAS data which can justifiably be treated as a simple random sample in model-based biomass estimation. The relatively uniform spatial distribution and locally arbitrary positioning of the resulting sample is similar to the design used by the US national forest inventory (NFI). We demonstrated model-based estimation using a sample of GLAS data in the US state of California, where our estimate of biomass (211 Mg/hectare) was within the 1.4% standard error of the design-based estimate supplied by the US NFI. The standard error of the GLAS-based estimate was significantly higher than the NFI estimate, although the cost of the GLAS estimate (excluding costs for the satellite itself) was almost nothing, compared to at least US$ 10.5 million for the NFI estimate.

Conclusions

Global application of model-based estimation using GLAS, while demanding significant consolidation of training data, would improve inter-comparability of international biomass estimates by imposing consistent methods and a globally coherent sample frame. The methods presented here constitute a globally extensible approach for generating a simple random sample from the global GLAS dataset, enabling its use in forest inventory activities.

SUBMITTER: Healey SP

PROVIDER: S-EPMC3527180 | biostudies-literature | 2012 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A sample design for globally consistent biomass estimation using lidar data from the Geoscience Laser Altimeter System (GLAS).

Healey Sean P SP Patterson Paul L PL Saatchi Sassan S Lefsky Michael A MA Lister Andrew J AJ Freeman Elizabeth A EA

Carbon balance and management 20121031 1

<h4>Unlabelled</h4><h4>Background</h4>Lidar height data collected by the Geosciences Laser Altimeter System (GLAS) from 2002 to 2008 has the potential to form the basis of a globally consistent sample-based inventory of forest biomass. GLAS lidar return data were collected globally in spatially discrete full waveform "shots," which have been shown to be strongly correlated with aboveground forest biomass. Relationships observed at spatially coincident field plots may be used to model biomass at ...[more]

PMID: 23111323

Similar Datasets

Project description:Background:Precision agriculture is an emerging research field that relies on monitoring and managing field variability in phenotypic traits. An important phenotypic trait is biomass, a comprehensive indicator that can reflect crop yields. However, non-destructive biomass estimation at fine levels is unknown and challenging due to the lack of accurate and high-throughput phenotypic data and algorithms. Results:In this study, we evaluated the capability of terrestrial light detection and ranging (lidar) data in estimating field maize biomass at the plot, individual plant, leaf group, and individual organ (i.e., individual leaf or stem) levels. The terrestrial lidar data of 59 maize plots with more than 1000 maize plants were collected and used to calculate phenotypes through a deep learning-based pipeline, which were then used to predict maize biomass through simple regression (SR), stepwise multiple regression (SMR), artificial neural network (ANN), and random forest (RF). The results showed that terrestrial lidar data were useful for estimating maize biomass at all levels (at each level, R2 was greater than 0.80), and biomass estimation at leaf group level was the most precise (R2?=?0.97, RMSE?=?2.22 g) among all four levels. All four regression techniques performed similarly at all levels. However, considering the transferability and interpretability of the model itself, SR is the suggested method for estimating maize biomass from terrestrial lidar-derived phenotypes. Moreover, height-related variables showed to be the most important and robust variables for predicting maize biomass from terrestrial lidar at all levels, and some two-dimensional variables (e.g., leaf area) and three-dimensional variables (e.g., volume) showed great potential as well. Conclusion:We believe that this study is a unique effort on evaluating the capability of terrestrial lidar on estimating maize biomass at difference levels, and can provide a useful resource for the selection of the phenotypes and models required to estimate maize biomass in precision agriculture practices.

Project description:Above-ground biomass (AGB) is an important indicator for effectively assessing crop growth and yield and, in addition, is an important ecological indicator for assessing the efficiency with which crops use light and store carbon in ecosystems. However, most existing methods using optical remote sensing to estimate AGB cannot observe structures below the maize canopy, which may lead to poor estimation accuracy. This paper proposes to use the stem-leaf separation strategy integrated with unmanned aerial vehicle LiDAR and multispectral image data to estimate the AGB in maize. First, the correlation matrix was used to screen optimal the LiDAR structural parameters (LSPs) and the spectral vegetation indices (SVIs). According to the screened indicators, the SVIs and the LSPs were subjected to multivariable linear regression (MLR) with the above-ground leaf biomass (AGLB) and above-ground stem biomass (AGSB), respectively. At the same time, all SVIs derived from multispectral data and all LSPs derived from LiDAR data were subjected to partial least squares regression (PLSR) with the AGLB and AGSB, respectively. Finally, the AGB was computed by adding the AGLB and the AGSB, and each was estimated by using the MLR and the PLSR methods, respectively. The results indicate a strong correlation between the estimated and field-observed AGB using the MLR method (R 2 = 0.82, RMSE = 79.80 g/m2, NRMSE = 11.12%) and the PLSR method (R 2 = 0.86, RMSE = 72.28 g/m2, NRMSE = 10.07%). The results indicate that PLSR more accurately estimates AGB than MLR, with R 2 increasing by 0.04, root mean square error (RMSE) decreasing by 7.52 g/m2, and normalized root mean square error (NRMSE) decreasing by 1.05%. In addition, the AGB is more accurately estimated by combining LiDAR with multispectral data than LiDAR and multispectral data alone, with R 2 increasing by 0.13 and 0.30, respectively, RMSE decreasing by 22.89 and 54.92 g/m2, respectively, and NRMSE decreasing by 4.46% and 7.65%, respectively. This study improves the prediction accuracy of AGB and provides a new guideline for monitoring based on the fusion of multispectral and LiDAR data.

Project description:Above-ground biomass (AGB) is a trait with much potential for exploitation within wheat breeding programs and is linked closely to canopy height (CH). However, collecting phenotypic data for AGB and CH within breeding programs is labor intensive, and in the case of AGB, destructive and prone to assessment error. As a result, measuring these traits is seldom a priority for breeders, especially at the early stages of a selection program. LiDAR has been demonstrated as a sensor capable of collecting three-dimensional data from wheat field trials, and potentially suitable for providing objective, non-destructive, high-throughput estimates of AGB and CH for use by wheat breeders. The current study investigates the deployment of a LiDAR system on a ground-based high-throughput phenotyping platform in eight wheat field trials across southern Australia, for the non-destructive estimate of AGB and CH. LiDAR-derived measurements were compared to manual measurements of AGB and CH collected at each site and assessed for their suitability of application within a breeding program. Correlations between AGB and LiDAR Projected Volume (LPV) were generally strong (up to r = 0.86), as were correlations between CH and LiDAR Canopy Height (LCH) (up to r = 0.94). Heritability (H2) of LPV (H2 = 0.32-0.90) was observed to be greater than, or similar to, the heritability of AGB (H2 = 0.12-0.78) for the majority of measurements. A similar level of heritability was observed for LCH (H2 = 0.41-0.98) and CH (H2 = 0.49-0.98). Further to this, measurements of LPV and LCH were shown to be highly repeatable when collected from either the same or opposite direction of travel. LiDAR scans were collected at a rate of 2,400 plots per hour, with the potential to further increase throughput to 7,400 plots per hour. This research demonstrates the capability of LiDAR sensors to collect high-quality, non-destructive, repeatable measurements of AGB and CH suitable for use within both breeding and research programs.

Dataset Information

A sample design for globally consistent biomass estimation using lidar data from the Geoscience Laser Altimeter System (GLAS).

Unlabelled

Background

Results

Conclusions

Publications

A sample design for globally consistent biomass estimation using lidar data from the Geoscience Laser Altimeter System (GLAS).

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets