High-throughput arrays for rapid characterization of solution-processable transparent conducting electrodes.
Ontology highlight
ABSTRACT:
SUBMITTER: Kustra S
PROVIDER: S-EPMC3527683 | biostudies-literature | 2012 Dec
REPOSITORIES: biostudies-literature
Publications
High-throughput arrays for rapid characterization of solution-processable transparent conducting electrodes.
Kustra Stephen S Wu Haosheng H Basu Saurav S Rohde Gustavo K GK Bettinger Christopher J CJ
Small (Weinheim an der Bergstrasse, Germany) 20120917 24
Similar Datasets
Project description:A novel approach for the fabrication of ultra-smooth and highly bendable substrates consisting of metal grid-conducting polymers that are fully embedded into transparent substrates (ME-TCEs) was successfully demonstrated. The fully printed ME-TCEs exhibited ultra-smooth surfaces (surface roughness ~1.0 nm), were highly transparent (~90% transmittance at a wavelength of 550 nm), highly conductive (sheet resistance ~4 Ω ◻-1), and relatively stable under ambient air (retaining ~96% initial resistance up to 30 days). The ME-TCE substrates were used to fabricate flexible organic solar cells and organic light-emitting diodes exhibiting devices efficiencies comparable to devices fabricated on ITO/glass substrates. Additionally, the flexibility of the organic devices did not degrade their performance even after being bent to a bending radius of ~1 mm. Our findings suggest that ME-TCEs are a promising alternative to indium tin oxide and show potential for application toward large-area optoelectronic devices via fully printing processes.
| S-EPMC5093558 | biostudies-literature
Project description:Nonfullerene organic solar cells (OSCs) have achieved breakthrough with pushing the efficiency exceeding 17%. While this shed light on OSC commercialization, high-performance flexible OSCs should be pursued through solution manufacturing. Herein, we report a solution-processed flexible OSC based on a transparent conducting PEDOT:PSS anode doped with trifluoromethanesulfonic acid (CF3SO3H). Through a low-concentration and low-temperature CF3SO3H doping, the conducting polymer anodes exhibited a main sheet resistance of 35 Ω sq-1 (minimum value: 32 Ω sq-1), a raised work function (≈ 5.0 eV), a superior wettability, and a high electrical stability. The high work function minimized the energy level mismatch among the anodes, hole-transporting layers and electron-donors of the active layers, thereby leading to an enhanced carrier extraction. The solution-processed flexible OSCs yielded a record-high efficiency of 16.41% (maximum value: 16.61%). Besides, the flexible OSCs afforded the 1000 cyclic bending tests at the radius of 1.5 mm and the long-time thermal treatments at 85 °C, demonstrating a high flexibility and a good thermal stability.
| S-EPMC8187532 | biostudies-literature
Project description:Delafossite crystals are fascinating ternary oxides that have demonstrated transparent conductivity and ambipolar doping. Here we use a high-throughput approach based on density functional theory to find delafossite and related layered phases of composition ABX2, where A and B are elements of the periodic table, and X is a chalcogen (O, S, Se, and Te). From the 15 624 compounds studied in the trigonal delafossite prototype structure, 285 are within 50 meV/atom from the convex hull of stability. These compounds are further investigated using global structural prediction methods to obtain their lowest-energy crystal structure. We find 79 systems not present in the materials project database that are thermodynamically stable and crystallize in the delafossite or in closely related structures. These novel phases are then characterized by calculating their band gaps and hole effective masses. This characterization unveils a large diversity of properties, ranging from normal metals, magnetic metals, and some candidate compounds for p-type transparent electrodes.
| S-EPMC5339873 | biostudies-literature
Project description:Zinc oxide (ZnO) thin-film transistors (TFTs) have many promising applications in the areas of logic circuits, displays, ultraviolet detectors, and biosensors due to their high performances, facile fabrication processing, and low cost. The solution method is an important technique for low-cost and large fabrication of oxide semiconductor TFTs. However, a key challenge of solution-processable ZnO TFTs is the relatively high processing temperature (≥500 °C) for achieving high carrier mobility. Here, facile, low-cost, and solution-processable ZnO TFTs were fabricated under the annealing temperature of ≤300 °C. Dense and polycrystalline ZnO films were deposited by the spin-coating method. The ZnO TFTs showed the maximum electron mobility of 11 cm2/V s and a high on/off ratio of >107 when the ZnO thin films were annealed at 300 °C. The mobility was extremely high among solution-processable undoped ZnO TFTs reported previously, even better than some high-cost indium-doped ZnO TFTs fabricated at low temperature. Furthermore, it is found that the mechanism of oxygen vacancies dominates the electron transport in ZnO thin film and interface behaviors of ZnO thin film and SiO2 gate insulator, and then dominates the performances of devices.
| S-EPMC6645662 | biostudies-literature
Project description:We report synthesis and fabrication of highly thionated reduced graphene oxide and its Langmuir-Blodgett (LB) film without an LB trough. As the synthesized product, mercapto reduced graphene oxide (mRGO) contains high thiol content estimated from XPS, corresponding to a surface coverage of 1.3 SH/nm2. The mRGO LB film shows two electronic transport properties, following Efros-Shklovskii variable-range hopping (VRH) and Mott VRH at low and high temperature, respectively. Optical and band gap of the LB film was estimated from Tauc plot and semi-logarithmic-scale plot of sheet resistance versus temperature to be 0.6 and 0.1 eV, respectively. Additionally, the sheet resistance of the mRGO LB film depends on the quantity of the thiol functional group with the same transmittance at 550 nm (500 kΩ for mRGO, 1.3 MΩ for tRGO with 92% transmittance).
| S-EPMC8124529 | biostudies-literature
Project description:By using 1,2-propanediol instead of the classic polyol solvent, ethylene glycol, ultra-long silver nanowires are obtained in only 1 h. These nanowires lead to transparent electrodes with a sheet resistance of 5 Ohms per sq at a transparency of 94%, one of the highest figures of merit for nanowire electrodes ever reported.
| S-EPMC9419745 | biostudies-literature
Project description:Electrodeposited Ag mesh transparent conducting electrodes (TCEs) based on self-cracking templates can achieve high optical transmittances and low sheet resistances by controlling the shape of the self-cracking templates and electrodeposition duration. The surface coverage of the mesh is mainly determined by the surface shape of the self-cracking template. Electrodeposition of Ag can adjust the thickness of the mesh, significantly reducing the sheet resistance while maintaining the high optical transmittance of the TCEs. The TCE electrodeposited for 30 s exhibited an optical transmittance as high as 88.4% and a sheet resistance as low as 2.24 Ω/□. Here we provide the microstructural and optoelectronic performance data of the electrodeposited Ag mesh TCEs.
| S-EPMC10293949 | biostudies-literature
Project description:In this contribution, inspired by the excellent resource management and material transport function of leaf veins, the electrical transport function of metallized leaf veins is mimicked from the material transport function of the vein networks. By electroless copper plating on real leaf vein networks with copper thickness of only several hundred nanometre up to several micrometre, certain leaf veins can be converted to transparent conductive electrodes with an ultralow sheet resistance 100 times lower than that of state-of-the-art indium tin oxide thin films, combined with a broadband optical transmission of above 80% in the UV-VIS-IR range. Additionally, the resource efficiency of the vein-like electrode is characterized by the small amount of material needed to build up the networks and the low copper consumption during metallization. In particular, the high current density transport capability of the electrode of > 6000 A cm-2 was demonstrated. These superior properties of the vein-like structures inspire the design of high-performance transparent conductive electrodes without using critical materials and may significantly reduce the Ag consumption down to < 10% of the current level for mass production of solar cells and will contribute greatly to the electrode for high power density concentrator solar cells, high power density Li-ion batteries, and supercapacitors.
| S-EPMC7770790 | biostudies-literature
Project description:Transparent conducting electrodes play a fundamental role in far-field PhotoVoltaic systems, but have never been thoroughly investigated for near-field applications. Here we show, in the context of near-field planar ultra-thin ThermoPhotoVoltaic cells using surface-plasmon-polariton thermal emitters, that the resonant nature of the nanophotonic system significantly alters the design criteria for the necessary conducting front electrode. The traditional ratio of optical-to-DC conductivities is alone not an adequate figure of merit, instead the desired impedance matching between the emitter and absorber modes along with their coupling to the free-carrier resonance of the front electrode are key for optimal device design and performance. Moreover, we demonstrate that conducting electrodes 'opaque' to incoming far-field radiation can, in fact, be used in the near field with decent performance by taking advantage of evanescent photon tunneling from the emitter to the absorber. Finally, we identify and compare appropriate tunable-by-doping materials for front electrodes in near-field ThermoPhotoVoltaics, specifically molybdenum-doped indium oxide, dysprosium-doped cadmium oxide, graphene and diffused semiconductors, but also for 'opaque' electrodes, tin-doped indium oxide and silver nano-films. Predicted estimated performances include output power density ~10 W/cm 2 with >45% efficiency at 2100 °K emitter temperature and 60 Ω electrode square resistance, thus increasing the promise for high-performance practical devices.
| S-EPMC5656648 | biostudies-literature
Project description:We report floating catalyst chemical vapour deposition synthesis of single-walled carbon nanotubes (SWCNTs) for high-performance transparent conducting films (TCFs) using low feeding rate of precursor solution. Herein, ethanol acts as carbon source, ferrocene and thiophene as catalyst precursor and growth promoter, respectively. By adopting a low feeding rate of 4 µl min-1, the fabricated TCFs present one of the lowest sheet resistances of ca 78 Ω sq.-1. at 90% transmittance. Optical characterizations demonstrate that the mean diameter of high-quality SWCNTs is up to 2 nm. Additionally, electron microcopy observations provide evidence that the mean length of SWCNT bundles is as long as 28.4 µm while the mean bundle diameter is only 5.3 nm. Moreover, very few CNT loops can be found in the film. Remarkably, the fraction of individual SWCNTs reaches 24.6%. All those morphology data account for the superior optoelectronic performance of our SWCNT TCFs.
| S-EPMC6030293 | biostudies-literature