Dataset Information

Characterization of the distal esophagus high-pressure zone with manometry, ultrasound and micro-computed tomography.

ABSTRACT: We sought to determine how the individual components of the distal esophagus and proximal stomach form the gastroesophageal junction high-pressure zone (GEJHPZ) antireflux barrier.An endoscopic ultrasound/manometry catheter was pulled through the proximal stomach and distal esophagus in 20 normal subjects. The axial length and width of individual structures on endoscopic ultrasound were measured. The anatomic orientation of gastroesophageal junction (GEJ) components was examined in two organ donor specimens using micro-computed tomography (micro-CT).The three distinct structures identified within the GEJHPZ, from distal to proximal, were as follows: the gastric clasp and sling muscle fiber complex, crural diaphragm, and lower esophageal circular smooth muscle fibers (LEC). The LEC was statistically significantly thicker than adjacent esophageal muscles. These structures were associated with three pressure peaks. The pressure peak produced by the clasp/sling fiber complex often overlapped with the pressure peak from the crural diaphragm. The most proximal peak, associated with the LEC, was significantly greater and bimodal in nine of 20 subjects. This bimodal LEC pressure peak correlated with two areas of thickened muscle observed with ultrasound. Micro-CT of GEJ from organ donors confirmed the two areas of thickened muscle.Three distinct anatomic structures, the clasp and sling muscle fibers, crural diaphragm, and LEC combine to form the antireflux barrier of the proximal stomach and distal esophagus. The clasp and sling muscle fibers combine with the crural diaphragm to form a distal pressure profile. The more proximal LEC has a bimodal pressure profile in some patients.

SUBMITTER: Vegesna AK

PROVIDER: S-EPMC3530622 | biostudies-literature | 2013 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Characterization of the distal esophagus high-pressure zone with manometry, ultrasound and micro-computed tomography.

Vegesna A K AK Sloan J A JA Singh B B Phillips S J SJ Braverman A S AS Barbe M F MF Ruggieri M R MR Miller L S LS

Neurogastroenterology and motility 20120924 1

<h4>Background</h4>We sought to determine how the individual components of the distal esophagus and proximal stomach form the gastroesophageal junction high-pressure zone (GEJHPZ) antireflux barrier.<h4>Methods</h4>An endoscopic ultrasound/manometry catheter was pulled through the proximal stomach and distal esophagus in 20 normal subjects. The axial length and width of individual structures on endoscopic ultrasound were measured. The anatomic orientation of gastroesophageal junction (GEJ) compo ...[more]

PMID: 22998376

Similar Datasets

Project description:This study used available or purchased equipment and an image reconstruction system developed by the college of dentistry to establish a basic self-assembled micro-computed tomography (micro-CT) system. Such a system would be suitable for teaching dental radiology to dental students. Specifically, it could help students to understand the principles governing dental cone-beam computed tomography (CBCT) and provide graduate students with a system for scanning small samples (e.g., individual teeth) during the early stages of research. The self-assembled micro-CT system was constructed using a portable dental X-ray tube, an intraoral digital X-ray detector, a high-precision rotation stage, related bracket accessories, and a notebook computer. Reconstructed images and three-dimensional models of the maxillary right third molar were produced using the self-assembled micro-CT system and an advanced commercially available micro-CT system (Skyscan 2211). Subsequently, the reconstructed images and 3D models produced using the two systems were compared by two senior dentists to determine whether considerable visual differences could be observed. Finally, the signal-to-noise ratio (SNR) was used for quantitative analysis and to compare the systems. Although the self-assembled micro-CT system produced image boundaries that were not as sharp as those of Skyscan 2211, the images were nonetheless remarkably similar. In addition, the two micro-CT systems produced 3D models that were almost identical in appearance and root canal shape. Quantitative analysis revealed that Skyscan 2211 had produced a SNR that was superior to that of the self-assembled micro-CT system, with the difference ranging from 36.77% to 136.22%; enamel, which has a higher density, exhibited lower SNR differences, whereas dentin, which has a lower density, exhibited higher SNR differences. The self-assembled micro-CT system with a resolution of 36 ?m was created using a portable dental X-ray tube and an intraoral digital X-ray detector. Although the scanning time was relatively long (~30 min to scan images of a tooth), the images were adequate in the preliminary stage of experiments. More importantly, students were afforded the opportunity to observe the process of assembling and disassembling each component of a micro-CT scanner and thereby achieve a more comprehensive understanding of the principles governing micro-CT and dental CBCT.

Project description:BackgroundMicro computed tomography (micro CT) has been shown to provide exceptionally high quality imaging of the fine structural detail within urinary calculi. We tested the idea that micro CT might also be used to identify the mineral composition of urinary stones non-destructively.MethodsMicro CT x-ray attenuation values were measured for mineral that was positively identified by infrared microspectroscopy (FT-IR). To do this, human urinary stones were sectioned with a diamond wire saw. The cut surface was explored by FT-IR and regions of pure mineral were evaluated by micro CT to correlate x-ray attenuation values with mineral content. Additionally, intact stones were imaged with micro CT to visualize internal morphology and map the distribution of specific mineral components in 3-D.ResultsMicro CT images taken just beneath the cut surface of urinary stones showed excellent resolution of structural detail that could be correlated with structure visible in the optical image mode of FT-IR. Regions of pure mineral were not difficult to find by FT-IR for most stones and such regions could be localized on micro CT images of the cut surface. This was not true, however, for two brushite stones tested; in these, brushite was closely intermixed with calcium oxalate. Micro CT x-ray attenuation values were collected for six minerals that could be found in regions that appeared to be pure, including uric acid (3515 - 4995 micro CT attenuation units, AU), struvite (7242 - 7969 AU), cystine (8619 - 9921 AU), calcium oxalate dihydrate (13815 - 15797 AU), calcium oxalate monohydrate (16297 - 18449 AU), and hydroxyapatite (21144 - 23121 AU). These AU values did not overlap. Analysis of intact stones showed excellent resolution of structural detail and could discriminate multiple mineral types within heterogeneous stones.ConclusionsMicro CT gives excellent structural detail of urinary stones, and these results demonstrate the feasibility of identifying and localizing most of the common mineral types found in urinary calculi using laboratory CT.

Dataset Information

Characterization of the distal esophagus high-pressure zone with manometry, ultrasound and micro-computed tomography.

Publications

Characterization of the distal esophagus high-pressure zone with manometry, ultrasound and micro-computed tomography.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure