An electrochromic ionic liquid: design, characterization, and performance in a solid-state platform.
Ontology highlight
ABSTRACT:
SUBMITTER: Kavanagh A
PROVIDER: S-EPMC3542915 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The development of sustainable functional materials with strong potential to be applied in different areas has been growing and gaining increasing interest to address the environmental impact of current materials and technologies. In this scope, this work reports on sustainable functional materials with electrochromic properties, based on their increasing interest for a variety of applications, including sensing technologies. The materials have been developed based on a natural derived polymer, carrageenan, in which different amounts of the ionic liquid (IL) 1-ethyl-3-methylimidazolium thiocyanate ([EMIM][SCN]) were blended. It is shown that the addition of different amounts of IL to the carrageenan matrix does not affect the properties of the samples in terms of morphology or physicochemical and thermal properties, the most significant difference being the increase of the ionic conductivity with increasing IL content, ranging from 2.3 × 10-11 S·cm-1 for pristine carrageenan to 4.6 × 10-4 S·cm-1 for the samples with 5 and 60 wt % IL content, respectively. A electrochromic device has been developed based on the different IL/carrageenan samples as electrolyte and poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS) as electrodes. Spectroelectrochemistry testing demonstrates functional devices at low voltages between 0.3 and -0.9 V. Among the different samples, the one with 15 wt % IL content presents the best conditions for application, presenting an oxidation time of 6 s, a reduction time of 8 s, and a charge density of 1150 and 1050 μC·cm-2 for oxidation and reduction, respectively. The same sample also presents excellent optical density as a function of load density, presenting an optical switch (Δ%Tx) of 99%. Thus, it is demonstrated that it is possible to develop high efficiency and sustainable electrochromic devices based on natural polymers and ionic liquids.
| S-EPMC10226048 | biostudies-literature
Project description:Commercially available electrochromic (EC) windows are based on solid-state devices in which WO3 and NiOx films commonly serve as the EC and counter electrode layers, respectively. These metal oxide layers are typically physically deposited under vacuum, a time- and capital-intensive process when using rigid substrates. Herein we report a facile solution deposition method for producing amorphous WO3 and NiOx layers that prove to be effective materials for a solid-state EC device. The full device containing these solution-processed layers demonstrates performance metrics that meet or exceed the benchmark set by devices containing physically deposited layers of the same compositions. The superior EC performance measured for our devices is attributed to the amorphous nature of the NiOx produced by the solution-based photodeposition method, which yields a more effective ion storage counter electrode relative to the crystalline NiOx layers that are more widely used. This versatile method yields a distinctive approach for constructing EC windows.
| S-EPMC6277218 | biostudies-literature
Project description:The electrodeposition at low temperature for the direct growth of crystalline thin films without any templating agent in ionic liquid (IL) is a relatively new electrochemical synthetic strategy. This work studied the role of the deposition temperature, deposition time, and different working electrodes in the electrodeposition of crystalline Si thin films from the byproduct silicon tetrachloride in IL at low temperature. X-ray diffraction (XRD) revealed that the as-deposited Si films were crystalline at the temperature of 80 °C. Scanning electron microscopy (SEM) and Raman spectroscopy further indicated that the crystalline quality of the as-deposited silicon film was relatively the best when the electrodeposition time reached 1 h at the temperature of 100 °C; excessive electrodeposition would yield amorphous silicon on the surface of the as-deposit crystalline Si, which decreased the crystal quality of the Si film. The SEM and XRD, respectively, revealed that the crystal structure of Si yielded on e-InGa was significantly different from that produced on Ga and more impurities existed in the film. Research on the influence of these parameters on crystallinity and morphological characteristics of Si gives better control over the growth of crystalline Si thin films for specific applications.
| S-EPMC8154031 | biostudies-literature
Project description:Two neutral copper(I) halide complexes ([Cu(BTU)2X], X = Cl, Br) were prepared by the reduction of the corresponding copper(II) halides (chloride or bromide) with a benzoylthiourea (BTU, N-(3,4-diheptyloxybenzoyl)-N'-(4-heptadecafluorooctylphenyl)thiourea) ligand in ethanol. The two copper(I) complexes show a very interesting combination of 2D supramolecular structures, liquid crystalline, emission, and 1D ionic conduction properties. Their chemical structure was ascribed based on ESI-MS, elemental analysis, IR, and NMR spectroscopies (1H and 13C), while the mesomorphic behavior was analyzed through a combination of differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and powder X-ray diffraction (XRD). These new copper(I) complexes have mesomorphic properties and exhibit a hexagonal columnar mesophase over a large temperature range, more than 100 K, as evidenced by DSC studies and POM observations. The thermogravimetric analysis (TG) indicated a very good thermal stability of these samples up to the isotropization temperatures and over the whole temperature range of the liquid crystalline phase existence. Both complexes displayed a solid-state emission with quantum yields up to 8% at ambient temperature. The electrical properties of the new metallomesogens were investigated by variable temperature dielectric spectroscopy over the entire temperature range of the liquid crystalline phase. It was found that the liquid crystal phases favoured anhydrous proton conduction provided by the hydrogen-bonding networks formed by the NH…X moieties (X = halide or oxygen) of the benzoylthiourea ligand in the copper(I) complexes. A proton conductivity of 2.97 × 10-7 S·cm-1 was achieved at 430 K for the chloro-complex and 1.37 × 10-6 S·cm-1 at 440K for the related bromo-complex.
| S-EPMC10220757 | biostudies-literature
Project description:Background: In the last decade, there has been much interest in the area of solid polymer electrolyte (SPE) to address the issues of electrolyte leakage and evaporation in electrochromic devices (ECD). ECD is a state-of-the-art technology having the ability to change from transparent state to opaque state under the influence of a small applied voltage for energy saving applications. Methods: In this work, tungsten oxide (WO 3) films were fabricated via the sol-gel spin-coating method. Subsequently, ECDs were assembled based on SPE and liquid polymer electrolyte (LPE), respectively using indium doped tin oxide (ITO) coated glass as conducting electrodes and WO 3 films as working electrode. Results: Cyclic voltammetry (CV) results revealed reduced ionic conductivity of conducting ions in SPE based ECD (SECD) owing to increased viscosity by addition of PMMA. However, lesser time was required for the colouration process. LPE based ECD (LECD) showed higher colouration efficiency (CE) compared to its SECD counterpart. This is attributed to its larger optical modulation. Conclusions: This work presents a comparison between the performance of LECD and SECD in terms of electrochromic (EC) and optical properties. They were analysed through CV, chronoamperometry (CA) and ultraviolet-visible (UV-Vis) spectrophotometer. Furthermore, this work provides an insight on the employment of solid-state electrolytes in ECDs in view of the persistent leakage and evaporation problems in ECD implementation.
| S-EPMC9184923 | biostudies-literature
Project description:We report the theoretical and experimental investigation of two polyoxometalate-based metal-organic frameworks (MOFs), [(MnMo6)2(TFPM)]imine and [(AlMo6)2(TFPM)]imine, as quasi-solid-state electrolytes. Classical molecular dynamics coupled with quantum chemistry and grand canonical Monte Carlo are utilized to model the corresponding diffusion and ionic conduction in the two materials. Using different approximate levels of ion diffusion behavior, the primary ionic conduction mechanism was identified as solvent-assisted hopping (>77%). Detailed static and dynamic solvation structures were obtained to interpret Li+ motion with high spatial and temporal resolution. A rationally designed noninterpenetrating MOF-688(one-fold) material is proposed to achieve 6-8 times better performance (1.6-1.7 mS cm-1) than the current state-of-the-art (0.19-0.35 mS cm-1).
| S-EPMC9377385 | biostudies-literature
Project description:Due to the limit in computing power arising from the Von Neumann bottleneck, computational devices are being developed that mimic neuro-biological processing in the brain by correlating the device characteristics with the synaptic weight of neurons. This platform combines ionic liquid gating and electrowetting for programmable placement/connectivity of the ionic liquid. In this platform, both short-term potentiation (STP) and long-term potentiation (LTP) are realized via electrostatic and electrochemical doping of the amorphous indium gallium zinc oxide (aIGZO), respectively, and pulsed bias measurements are demonstrated for lower power considerations. While compatible with resistive elements, we demonstrate a platform based on transitive amorphous indium gallium zinc oxide (aIGZO) pixel elements. Using a lithium based ionic liquid, we demonstrate both potentiation (decrease in device resistance) and depression (increase in device resistance), and propose a 2D platform array that would enable a much higher pixel count via Active Matrix electrowetting.
| S-EPMC6680446 | biostudies-literature
Project description:Biomimetic solid-state nanofluidic diodes have attracted extensive research interest due to the possible applications in various fields, such as biosensing, energy conversion, and nanofluidic circuits. However, contributions of exterior surface to the transmembrane ionic transport are often ignored, which can be a crucial factor for ion rectification behavior. Herein, a rational design of robust sandwich-structured nanofluidic diode is shown by creating opposite charges on the exterior surfaces of a nanoporous membrane using inorganic oxides with distinct isoelectric points. Potential-induced changes in ion concentration within the nanopores lead to a current rectification; the results are subsequently supported by a theoretical simulation. Except for providing surface charges, functional inorganic oxides used in this work are complementary electrochromic materials. Hence, the sandwich-structured nanofluidic diode is further developed into an electrochromic membrane exhibiting a visual color change in response to redox potentials. The results show that the surface-charge-governed ionic transport and the nanoporous structure facilitate the migration of Li+ ions, which in turn enhance the electrochromic performance. It is envisioned that this work will create new avenues to design and optimize nanofluidic diodes and electrochromic devices.
| S-EPMC6145424 | biostudies-literature
Project description:An ionic liquid-based ionically cross-linked gel polymer electrolyte (GPE-ILs) was successfully synthesized using acrylic acid, 2-diethylaminoethyl methacrylate, methyl methacrylate, and ionic liquids. Electrochromic devices (ECDs) with an architecture of glass/FTO/WO3/GPE-ILs/FTO/glass were fabricated by a laminating technology. The devices showed performances of large optical modulation of 49.9% at 650 nm, short switching times with the coloration time (tc) of 7 s and the bleaching time (tb) of 4 s, high coloration efficiency of 96.2 cm2 C-1, and cycling stability of 200 cycles. The GPE-ILs exhibits high ionic conductivity, superior thermal stability and good self-healing ability. GPE-ILs demonstrates an ionic conductivity of 3.19 × 10-3 S cm-1 at 25 °C and the same ions migration behaviors with most widely used liquid electrolyte between -10 and 80 °C maintains more than 80% of its tensile strength after self-healing and received only 5% weight loss at 300 °C.
| S-EPMC7957721 | biostudies-literature
Project description:Energy dissipation in solid-state nanopores is an important issue for their use as a sensor for detecting and analyzing individual objects in electrolyte solution by ionic current measurements. Here, we report on evaluations of heating via diffusive ion transport in the nanoscale conduits using thermocouple-embedded SiNx pores. We found a linear rise in the nanopore temperature with the input electrical power suggestive of steady-state ionic heat dissipation in the confined nanospace. Meanwhile, the heating efficiency was elucidated to become higher in a smaller pore due to a rapid decrease in the through-water thermal conduction for cooling the fluidic channel. The scaling law suggested nonnegligible influence of the heating to raise the temperature of single-nanometer two-dimensional nanopores by a few kelvins under the standard cross-membrane voltage and ionic strength conditions. The present findings may be useful in advancing our understanding of ion and mass transport phenomena in nanopores.
| S-EPMC8836805 | biostudies-literature