Understanding the catalyst-free transformation of amorphous carbon into graphene by current-induced annealing
Ontology highlight
ABSTRACT:
SUBMITTER: Barreiro A
PROVIDER: S-EPMC3552284 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The dynamics of the graphene-catalyst interaction during chemical vapor deposition are investigated using in situ, time- and depth-resolved X-ray photoelectron spectroscopy, and complementary grand canonical Monte Carlo simulations coupled to a tight-binding model. We thereby reveal the interdependency of the distribution of carbon close to the catalyst surface and the strength of the graphene-catalyst interaction. The strong interaction of epitaxial graphene with Ni(111) causes a depletion of dissolved carbon close to the catalyst surface, which prevents additional layer formation leading to a self-limiting graphene growth behavior for low exposure pressures (10(-6)-10(-3) mbar). A further hydrocarbon pressure increase (to ?10(-1) mbar) leads to weakening of the graphene-Ni(111) interaction accompanied by additional graphene layer formation, mediated by an increased concentration of near-surface dissolved carbon. We show that growth of more weakly adhered, rotated graphene on Ni(111) is linked to an initially higher level of near-surface carbon compared to the case of epitaxial graphene growth. The key implications of these results for graphene growth control and their relevance to carbon nanotube growth are highlighted in the context of existing literature.
| S-EPMC4195372 | biostudies-literature
Project description:Reduced graphene oxide (rGO) is an ideal candidate for the improvement of supercapacitor (SC) performances due to its industrial-ready manufacturing process and ease of processing. In this work, rGO was used as an active binder for the manufacture of carbon black (CB) and rGO-based SCs. Being able to form a stable suspension in water, graphene oxide (GO) was initially exploited as a dispersing agent to fabricate a homogeneous slurry with CB having exclusively water as a low-cost and environment-friendly solvent. After casting on a suitable substrate, the material was subjected to thermal treatment allowing the reduction of GO to rGO, which was successively confirmed by chemical-physical analysis. An innovative current collector, consisting of high-quality rGO paper, was also proposed ensuring an improved adhesion between the active material and the substrate and a reduction of the whole weight with respect to devices fabricated using common metallic current collectors. Due to the interesting electrochemical performances, with a high specific power of 32.1 kW kg-1 and a corresponding specific energy of 8.8 Wh kg-1 at a current of 1 A g-1, and the improved manufacturing process, the described "all-graphene-based" device represents a valuable candidate for the future of SCs.
| S-EPMC7758981 | biostudies-literature
Project description:Amorphous ice is commonly used as a noncrystalline matrix for protecting sensitive biological samples in cryogenic electron microscopy (cryo-EM). The amorphization process of water is complex, and at least two amorphous states of different densities are known to exist, high- and low-density amorphous ices (HDA and LDA). These forms are considered to be the counterparts of two distinct liquid states, namely, high- and low-density liquid water. Herein, we investigate the HDA to LDA transition using electron diffraction and cryo-EM. The observed phase transition is induced by the impact of electrons, and we discuss two different mechanisms, namely, local heating and beam-induced motion of water molecules. The temperature increase is estimated by comparison with X-ray scattering experiments on identically prepared samples. Our results suggest that HDA, under the conditions used in our cryo-EM measurements, is locally heated above its glass-transition temperature.
| S-EPMC7569672 | biostudies-literature
Project description:Human tooth enamel has tightly packed c-axis-oriented hydroxyapatite (HAP: Ca10(PO4)6(OH)2) nanorods with high elastic modulus. Fabrication of an enamel architecture in vitro supports the repair of teeth using HAP; however, existing methods require complex and laborious steps to form an enamel-like structure. Here we present a very simple and effective technique for forming artificial enamel in near-physiological solution using a substrate composed of amorphous calcium phosphate (ACP) nanoparticles. Without any functionalized modification of the substrate surface, faint dissolution and successive phase transformation automatically induce formation of an intermediate layer of low-crystalline HAP nanoparticles, on which highly oriented HAP nanorods grow by geometrical selection. We also show that an enamel structure forms on a substrate of amorphous calcium carbonate when the surface nanoparticles react so as to form an intermediate layer similar to that in ACP. Our results demonstrate that there is a wide range of substrate choices for nanorod array formation. Contrary to current understanding, a stable surface designed in nanoscale is not essential for the growth of arranged guest crystals. Reactive amorphous nanoparticles and their transformation efficiently induce a nanorod array structure.
| S-EPMC5457434 | biostudies-literature
Project description:The research of high efficiency water splitting catalyst is important for the development of renewable energy economy. Here, the progress in the preparation of high efficiency hydrogen evolution reaction (HER) catalyst is reported. The support material is based on a polyhexaphenylbenzene material with intrinsic holes, which heals into carbon materials upon heating. The healing process is found to be useful for anchoring various transition metal atoms, among which the supported Ir Single-atom catalyst (SAC) catalyst shows much higher electrocatalytic activity and stability than the commercial Pt/C and Ir/C in HER. There is only 17 mV overpotential at 10 mA cm-2 , which is significantly lower than that of commercial Pt/C and Ir/C catalysts respectively by 26 and 3 mV, and the catalyst has an ultra-high mass activity (MA) of 51.6 AmgIr-1${\text{ A mg}}_{{\rm{Ir}}}^{ - 1}$ at 70 mV potential and turn over frequencies (TOF) of 171.61 s-1 at the potential of 100 mV. The density functional theory (DFT) calculation reveals the significant role of carbon coordination around the Ir center. A series of monatomic PBN-300-M are synthesized by using of designed carbon materials. The findings provide an enabling and versatile platform for facile accessing SACs toward many industrial important reactions.
| S-EPMC9069379 | biostudies-literature
Project description:A large-scale availability of the graphene is critical to the successful application of graphene-based electronic devices. The growth of epitaxial graphene (EG) on insulating silicon carbide (SiC) surfaces has opened a new promising route for large-scale high-quality graphene production. However, two key obstacles to epitaxial growth are extremely high requirements for almost perfectly ordered crystal SiC and harsh process conditions. Here, we report that the amorphous SiC (a-Si(1-x)C(x)) nano-shell (nano-film) can be directly transformed into graphene by using chlorination method under very mild reaction conditions of relative low temperature (800°C) and the ambient pressure in chlorine (Cl(2)) atmosphere. Therefore, our finding, the direct transformation of a-Si(1-x)C(x) into graphene under much milder condition, will open a door to apply this new method to the large-scale production of graphene at low costs.
| S-EPMC3556591 | biostudies-literature
Project description:The evolution of the structure of amorphous carbon (a-C) films during deposition and thermal annealing is of significant interest from both the materials science and application perspectives. However, despite the voluminous literature of studies dealing with the deposition and physical properties of a-C films, basic understanding of the structure evolution due to phase change during film growth and heating is fairly sparse and empirical, presumably due to the lack of high-resolution instruments that can probe structural changes at the atomic and molecular levels in real time. Molecular dynamics (MD) is a powerful computational method for studying atomic/molecular-scale movement and interactions. Thus, the objective of this study was to perform MD simulations that provide insight into changes in the structure of ultrathin a-C films during deposition and annealing. Simulation results reveal a multi-layer film structure, even for a-C films as thin as ~20?Å, the existence of a deposition energy that yields a-C films with the highest sp3 content, the transient and steady-state stages of the structure evolution during annealing at different temperatures, and the changes in the hybridization state (mainly in the bulk layer) encountered during annealing at elevated temperatures. The MD results of this study are of particular importance to applications where the deposition conditions and operation temperature affect the structure and, in turn, the physical properties of ultrathin a-C films used as protective overcoats.
| S-EPMC7229151 | biostudies-literature
Project description:Growth mechanism for synthesizing PVD based Graphene using Amorphous Carbon, catalyzed by Copper is investigated in this work. Different experiments with respect to Amorphous Carbon film thickness, annealing time and temperature are performed for the investigation. Copper film stress and its effect on hydrogen diffusion through the film grain boundaries are found to be the key factors for the growth mechanism, and supported by our Finite Element Modeling. Low temperature growth of Graphene is achieved and the proposed growth mechanism is found to remain valid at low temperatures.
| S-EPMC5343459 | biostudies-literature
Project description:The interaction of graphene with gold nanoparticles is investigated using transmission electron microscopy. We observe gold-nanoparticle-mediated etching of graphene flakes, often leading to hole formation. Further, using a combination of high-angle annular dark field imaging and electron energy loss spectroscopy, we highlight that the catalytic effects of gold nanoparticles on graphene lead to the formation of amorphous carbon layers. From the extracted diffractograms, we observe regions with diffraction halos as well as some regions with a weak tetrahedral motif. Using independently performed Raman measurements, we confirm the presence of tetrahedral amorphous carbon as well as mixed graphitic-amorphous regions. For the amorphous carbon regions with mixed sp2-sp3 states, the Raman G peak is red-shifted to 1564 cm-1 and an I D/I G ratio of 0.63 indicates less than 20% sp3 content. For the tetrahedral amorphous carbon regions, we observe that the Raman G peak is at 1580 cm-1, close to that of monolayer graphene. However, there is no Raman D peak, i.e., I D/I G = 0, which indicates close to 100% sp3 content. The translation of the Raman G peak location and the I D/I G ratios is on par with the amorphization trajectory analysis of Ferrari and Robertson (Phys. Rev. B: Condens. Matter Mater. Phys., 2000, 61, 14095) and validates the conversion route of graphite to amorphous carbon to tetrahedral amorphous carbon. The presented method provides a promising pathway for creating defect-induced amorphous carbon at room temperature, which has a broader impact on the electronics and semiconductor industries.
| S-EPMC11318520 | biostudies-literature
Project description:The lack of efficient and durable proton exchange membrane fuel cell electrocatalysts for the oxygen reduction reaction is still restraining the present hydrogen technology. Graphene-based carbon materials have emerged as a potential solution to replace the existing carbon black (CB) supports; however, their potential was never fully exploited as a commercial solution because of their more demanding properties. Here, a unique and industrially scalable synthesis of platinum-based electrocatalysts on graphene derivative (GD) supports is presented. With an innovative approach, highly homogeneous as well as high metal loaded platinum-alloy (up to 60 wt %) intermetallic catalysts on GDs are achieved. Accelerated degradation tests show enhanced durability when compared to the CB-supported analogues including the commercial benchmark. Additionally, in combination with X-ray photoelectron spectroscopy Auger characterization and Raman spectroscopy, a clear connection between the sp 2 content and structural defects in carbon materials with the catalyst durability is observed. Advanced gas diffusion electrode results show that the GD-supported catalysts exhibit excellent mass activities and possess the properties necessary to reach high currents if utilized correctly. We show record-high peak power densities in comparison to the prior best literature on platinum-based GD-supported materials which is promising information for future application.
| S-EPMC9361283 | biostudies-literature