Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High volumetric power density, non-enzymatic, glucose fuel cells.

ABSTRACT: The development of new implantable medical devices has been limited in the past by slow advances in lithium battery technology. Non-enzymatic glucose fuel cells are promising replacement candidates for lithium batteries because of good long-term stability and adequate power density. The devices developed to date however use an "oxygen depletion design" whereby the electrodes are stacked on top of each other leading to low volumetric power density and complicated fabrication protocols. Here we have developed a novel single-layer fuel cell with good performance (2??W cm?²) and stability that can be integrated directly as a coating layer on large implantable devices, or stacked to obtain a high volumetric power density (over 16??W cm?³). This represents the first demonstration of a low volume non-enzymatic fuel cell stack with high power density, greatly increasing the range of applications for non-enzymatic glucose fuel cells.

SUBMITTER: Oncescu V

PROVIDER: S-EPMC3565166 | biostudies-literature | 2013

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

High volumetric power density, non-enzymatic, glucose fuel cells.

Oncescu Vlad V Erickson David D

Scientific reports 20130206

The development of new implantable medical devices has been limited in the past by slow advances in lithium battery technology. Non-enzymatic glucose fuel cells are promising replacement candidates for lithium batteries because of good long-term stability and adequate power density. The devices developed to date however use an "oxygen depletion design" whereby the electrodes are stacked on top of each other leading to low volumetric power density and complicated fabrication protocols. Here we ha ...[more]

PMID: 23390576

Similar Datasets

Machine learning for guiding high-temperature PEM fuel cells with greater power density.

Project description:High-temperature polymer electrolyte membrane fuel cells (HT-PEMFCs) are enticing energy conversion technologies because they use low-cost hydrogen generated from methane and have simple water and heat management. However, proliferation of this technology requires improvement in power density. Here, we show that Machine Learning (ML) tools can help guide activities for improving HT-PEMFC power density because these tools quickly and efficiently explore large search spaces. The ML scheme relied on a 0-D, semi-empirical model of HT-PEMFC polarization behavior and a data analysis framework. Existing datasets underwent support vector regression analysis using a radial basis function kernel. In addition, the 0-D, semi-empirical HT-PEMFC model was substantiated by polarization data, and synthetic data generated from this model was subject to dimension reduction and density-based clustering. From these analyses, pathways were revealed to surpass 1 W cm-2 in HT-PEMFCs with oxygen as the oxidant and CO containing hydrogen.

| S-EPMC7892359 | biostudies-literature

High Power Density Direct Formate Microfluidic Fuel Cells with the Different Catalyst-Free Oxidants

Project description:As micropower devices, microfluidic fuel cells (MFCs)

| S-EPMC9386720 | biostudies-literature

Production of a monolithic fuel cell stack with high power density.

Project description:The transportation sector is undergoing a technology shift from internal combustion engines to electric motors powered by secondary Li-based batteries. However, the limited range and long charging times of Li-ion batteries still hinder widespread adoption. This aspect is particularly true in the case of heavy freight and long-range transportation, where solid oxide fuel cells (SOFCs) offer an attractive alternative as they can provide high-efficiency and flexible fuel choices. However, the SOFC technology is mainly used for stationary applications owing to the high operating temperature, low volumetric power density and specific power, and poor robustness towards thermal cycling and mechanical vibrations of conventional ceramic-based cells. Here, we present a metal-based monolithic fuel cell design to overcome these issues. Cost-effective and scalable manufacturing processes are employed for fabrication, and only a single heat treatment is required, as opposed to multiple thermal treatments in conventional SOFC production. The design is optimised through three-dimensional multiphysics modelling, nanoparticle infiltration, and corrosion-mitigating treatments. The monolithic fuel cell stack shows a power density of 5.6 kW/L, thus, demonstrating the potential of SOFC technology for transport applications.

| S-EPMC8913829 | biostudies-literature

High-temperature low-humidity proton exchange membrane with “stream-reservoir” ionic channels for high-power-density fuel cells

Project description:The perfluorosulfonic acid (PFSA) proton exchange membrane (PEM) is the key component for hydrogen fuel cells (FCs). We used in situ synchrotron scattering to investigate the PEM morphology evolution and found a “stream-reservoir” morphology, which enables efficient proton transport. The short-side-chain (SSC) PFSA PEM is fabricated under the guidance of morphology optimization, which delivered a proton conductivity of 193 milliSiemens per centimeter [95% relativity humidity (RH)] and 40 milliSiemens per centimeter (40% RH) at 80°C. The improved glass transition temperature, water permeability, and mechanical strength enable high-temperature low-humidity FC applications. Performance improvement by 82.3% at 110°C and 25% RH is obtained for SSC-PFSA PEM FCs compared to Nafion polymer PEM devices. The insights in chain conformation, packing mechanism, crystallization, and phase separation of PFSAs build up the structure-property relationship. In addition, SSC-PFSA PEM is ideal for high-temperature low-humidity FCs that are needed urgently for high-power-density and heavy-duty applications. The SSC-PFSA PEM with hierarchical morphology is developed and successfully used in high-temperature low-humidity fuel cells.

| S-EPMC10132749 | biostudies-literature

Self-Powered Detection of Glucose by Enzymatic Glucose/Oxygen Fuel Cells on Printed Circuit Boards.

Project description:Monitoring glucose levels in physiological fluids can help prevent severe complications associated with hypo- and hyper-glycemic events. Current glucose-monitoring systems require a three-electrode setup and a power source to function, which can hamper the system miniaturization to the patient discomfort. Enzymatic fuel cells (EFCs) offer the opportunity to develop self-powered and minimally invasive glucose sensors by eliminating the need for an external power source. Nevertheless, practical applications demand for cost-effective and mass-manufacturable EFCs compatible with integration strategies. In this study, we explore for the first time the use of gold electrodes on a printed circuit board (PCB) for the development of an EFC and demonstrate its application in saliva. To increase the specific surface area, the PCB gold-plated electrodes were modified with porous gold films. At the anode, glucose oxidase is immobilized with an osmium redox polymer that serves as an electron-transfer mediator. At the cathode, bilirubin oxidase is adsorbed onto the porous gold surface with a blocking agent that prevents parasitic reactions while maintaining the enzyme catalytic activity. The resulting EFC showed a linear response to glucose in phosphate buffer within the range 50 μM to 1 mM, with a sensitivity of 14.13 μA cm-2 mM-1. The sensor was further characterized in saliva, showing the linear range of detection of 0.75 to 2 mM, which is within the physiological range, and sensitivity of 21.5 μA cm-2 mM-1. Overall, this work demonstrates that PCBs are suitable platforms for EFCs, paving the way for the development of fully integrated systems in a seamless and miniaturized device.

| S-EPMC8735749 | biostudies-literature

High-Power Abiotic Direct Glucose Fuel Cell Using a Gold-Platinum Bimetallic Anode Catalyst.

Project description:We developed a high-power abiotic direct glucose fuel cell system using a Au-Pt bimetallic anode catalyst. The high power generation (95.7 mW cm-2) was attained by optimizing operating conditions such as the composition of a bimetallic anode catalyst, loading amount of the metal catalyst on a carbon support, ionomer/carbon weight ratio when the catalyst was applied to the anode, glucose and KOH concentrations in the fuel solution, and operating temperature and flow rate of the fuel solution. It was found that poly(N-vinyl-2-pyrrolidone)-stabilized Au80Pt20 nanoparticles (mean diameter 1.5 nm) on a carbon (Ketjen Black 600) support function as a highly active anode catalyst for the glucose electrooxidation. The ionomer/carbon weight ratio also greatly affects the cell properties, which was found to be optimal at 0.2. As for the glucose concentration, a maximum cell power was derived at 0.4-0.6 mol dm-3. A high KOH concentration (4.0 mol dm-3) was preferable for deriving the maximum power. The cell power increased with the increasing flow rate of the glucose solution up to 50 cm3 min-1 and leveled off thereafter. At the optimal condition, the maximum power density and corresponding cell voltage of 58.2 mW cm-2 (0.36 V) and 95.7 mW cm-2 (0.34 V) were recorded at 298 and 328 K, respectively.

| S-EPMC6643607 | biostudies-literature

Boosting Power Density of Microbial Fuel Cells with 3D Nitrogen-Doped Graphene Aerogel Electrode.

Project description:A 3D nitrogen-doped graphene aerogel (N-GA) as an anode material for microbial fuel cells (MFCs) is reported. Electron microscopy images reveal that the N-GA possesses hierarchical porous structure that allows efficient diffusion of both bacterial cells and electron mediators in the interior space of 3D electrode, and thus, the colonization of bacterial communities. Electrochemical impedance spectroscopic measurements further show that nitrogen doping considerably reduces the charge transfer resistance and internal resistance of GA, which helps to enhance the MFC power density. Importantly, the dual-chamber milliliter-scale MFC with N-GA anode yields an outstanding volumetric power density of 225 ± 12 W m-3 normalized to the total volume of the anodic chamber (750 ± 40 W m-3 normalized to the volume of the anode). These power densities are the highest values report for milliliter-scale MFCs with similar chamber size (25 mL) under the similar measurement conditions. The 3D N-GA electrode shows great promise for improving the power generation of MFC devices.

| S-EPMC5074258 | biostudies-literature

High-density volumetric super-resolution microscopy.

Project description:Volumetric super-resolution microscopy typically encodes the 3D position of single-molecule fluorescence into a 2D image by changing the shape of the point spread function (PSF) as a function of depth. However, the resulting large and complex PSF spatial footprints reduce biological throughput and applicability by requiring lower labeling densities to avoid overlapping fluorescent signals. We quantitatively compare the density dependence of single-molecule light field microscopy (SMLFM) to other 3D PSFs (astigmatism, double helix and tetrapod) showing that SMLFM enables an order-of-magnitude speed improvement compared to the double helix PSF by resolving overlapping emitters through parallax. We demonstrate this optical robustness experimentally with high accuracy ( > 99.2 ± 0.1%, 0.1 locs μm-2) and sensitivity ( > 86.6 ± 0.9%, 0.1 locs μm-2) through whole-cell (scan-free) imaging and tracking of single membrane proteins in live primary B cells. We also exemplify high-density volumetric imaging (0.15 locs μm-2) in dense cytosolic tubulin datasets.

| S-EPMC10908787 | biostudies-literature

Rational design of quinones for high power density biofuel cells.

Project description:Enzymatic fuel cells (EFCs) are devices that can produce electrical energy by enzymatic oxidation of energy-dense fuels (such as glucose). When considering bioanode construction for EFCs, it is desirable to use a system with a low onset potential and high catalytic current density. While these two properties are typically mutually exclusive, merging these two properties will significantly enhance EFC performance. We present the rational design and preparation of an alternative naphthoquinone-based redox polymer hydrogel that is able to facilitate enzymatic glucose oxidation at low oxidation potentials while simultaneously producing high catalytic current densities. When coupled with an enzymatic biocathode, the resulting glucose/O2 EFC possessed an open-circuit potential of 0.864 ± 0.006 V, with an associated maximum current density of 5.4 ± 0.5 mA cm-2. Moreover, the EFC delivered its maximum power density (2.3 ± 0.2 mW cm-2) at a high operational potential of 0.55 V.

| S-EPMC5502403 | biostudies-literature

Hydrothermal synthesis of NiWO4 crystals for high performance non-enzymatic glucose biosensors.

Project description:A facile hydrothermal route for the synthesis of ordered NiWO4 nanocrystals, which show promising applications as high performance non-enzymatic glucose sensor is reported. The NiWO4-modified electrodes showed excellent sensitivity (269.6 μA mM(-1 )cm(-2)) and low detection limit (0.18 μM) for detection of glucose with desirable selectivity, stability, and tolerance to interference, rendering their prospective applications as cost-effective, enzyme-free glucose sensors.

| S-EPMC4834566 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data