Browse
Submit Data
Databases
API
Help

Dataset Information

33 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hollow porous SiO2 nanocubes towards high-performance anodes for lithium-ion batteries.

ABSTRACT: The high theoretical capacity and low discharge potential of silicon have attracted much attention on Si-based anodes. Herein, hollow porous SiO2 nanocubes have been prepared via a two-step hard-template process and evaluated as electrode materials for lithium-ion batteries. The hollow porous SiO2 nanocubes exhibited a reversible capacity of 919 mAhg(-1) over 30 cycles. The reasonable property could be attributed to the unique hollow nanostructure with large volume interior and numerous crevices in the shell, which could accommodate the volume change and alleviate the structural strain during Li ions' insertion and extraction, as well as allow rapid access of Li ions during charge/discharge cycling. It is found that the formation of irreversible or reversible lithium silicates in the anodes determines the capacity of a deep-cycle battery, fast transportation of Li ions in hollow porous SiO2 nanocubes is beneficial to the formation of Li2O and Si, contributing to the high reversible capacity.

SUBMITTER: Yan N

PROVIDER: S-EPMC3610094 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Porous Multicomponent Mn-Sn-Co Oxide Microspheres as Anodes for High-Performance Lithium-Ion Batteries.

Project description:Porous multicomponent Mn-Sn-Co oxide microspheres (MnSnO3-MC400 and MnSnO3-MC500) have been fabricated using CoSn(OH)6 nanocubes as templates via controlling pyrolysis of a CoSn(OH)6/Mn0.5Co0.5CO3 precursor at different temperatures in N2. During the pyrolysis process of CoSn(OH)6/Mn0.5Co0.5CO3 from 400 to 500 °C, the part of (Co,Mn)(Co,Mn)2O4 converts into MnCo2O4 accompanied with structural transformation. The MnSnO3-MC400 and MnSnO3-MC500 microspheres as secondary nanomaterials consist of MnSnO3, MnCo2O4, and (Co,Mn)(Co,Mn)2O4. Benefiting from the advantages of multicomponent synergy and porous secondary nanomaterials, the MnSnO3-MC400 and MnSnO3-MC500 microspheres as anodes exhibit the specific capacities of 1030 and 750 mA h g-1 until 1000 cycles at 1 A g-1 without an obvious capacity decay, respectively.

| S-EPMC6777295 | biostudies-literature

Silicon-Nanographite Aerogel-Based Anodes for High Performance Lithium Ion Batteries.

Project description:To increase the energy storage density of lithium-ion batteries, silicon anodes have been explored due to their high capacity. One of the main challenges for silicon anodes are large volume variations during the lithiation processes. Recently, several high-performance schemes have been demonstrated with increased life cycles utilizing nanomaterials such as nanoparticles, nanowires, and thin films. However, a method that allows the large-scale production of silicon anodes remains to be demonstrated. Herein, we address this question by suggesting new scalable nanomaterial-based anodes. Si nanoparticles were grown on nanographite flakes by aerogel fabrication route from Si powder and nanographite mixture using polyvinyl alcohol (PVA). This silicon-nanographite aerogel electrode has stable specific capacity even at high current rates and exhibit good cyclic stability. The specific capacity is 455 mAh g-1 for 200th cycles with a coulombic efficiency of 97% at a current density 100 mA g-1.

| S-EPMC6787263 | biostudies-literature

Stable cycling of SiO₂ nanotubes as high-performance anodes for lithium-ion batteries.

Project description:Herein, SiO2 nanotubes have been fabricated via a facile two step hard-template growth method and evaluated as an anode for Li-ion batteries. SiO2 nanotubes exhibit a highly stable reversible capacity of 1266 mAhg(-1) after 100 cycles with negligible capacity fading. SiO2 NT anodes experience a capacity increase throughout the first 80 cycles through Si phase growth via SiO2 reduction. The hollow morphology of the SiO2 nanotubes accommodates the large volume expansion experienced by Si-based anodes during lithiation and promotes preservation of the solid electrolyte interphase layer. The thin walls of the SiO2 nanotubes allow for effective reduction in Li-ion diffusion path distance and, thus, afford a favorable rate cyclability. The high aspect ratio character of these nanotubes allow for a relatively scalable fabrication method of nanoscale SiO2-based anodes.

| S-EPMC3986728 | biostudies-other

Porous Amorphous Silicon Hollow Nanoboxes Coated with Reduced Graphene Oxide as Stable Anodes for Sodium-Ion Batteries.

Project description:Amorphous silicon (a-Si), due to its satisfactory theoretical capacity, moderate discharge potential, and abundant reserves, is treated as one of the most prospective materials for the anode of sodium-ion batteries (SIBs). However, the slow Na+ diffusion kinetics, poor electrical conductivity, and rupture-prone structures of a-Si restrict its further development. In this work, a composite (a-Si@rGO) consisting of porous amorphous silicon hollow nanoboxes (a-Si HNBs) and reduced graphene oxide (rGO) is prepared. The a-Si HNBs are synthesized through "sodiothermic reduction" of silica hollow nanoboxes at a relatively low temperature, and the rGO is covered on the surface of the a-Si HNBs by electrostatic interaction. The as-synthesized composite anode applying in SIBs exhibits a high initial discharge capacity of 681.6 mAh g-1 at 100 mA g-1, great stability over 2000 cycles at 800 mA g-1, and superior rate performance (261.2, 176.8, 130.3, 98.4, and 73.3 mAh g-1 at 100, 400, 800, 1500, and 3000 mA g-1, respectively). The excellent electrochemical properties are ascribed to synergistic action of the porous hollow nanostructure of a-Si and the rGO coating. This research not only offers an innovative synthetic means for the development of a-Si in various fields but also provides a practicable idea for the design of other alloy-type anodes.

| S-EPMC9434769 | biostudies-literature

Facile Synthesis of FeS@C Particles Toward High-Performance Anodes for Lithium-Ion Batteries.

Project description:High energy density batteries with high performance are significantly important for intelligent electrical vehicular systems. Iron sulfurs are recognized as one of the most promising anodes for high energy density lithium-ion batteries because of their high theoretical specific capacity and relatively stable electrochemical performance. However, their large-scale commercialized application for lithium-ion batteries are plagued by high-cost and complicated preparation methods. Here, we report a simple and cost-effective method for the scalable synthesis of nanoconfined FeS in porous carbon (defined as FeS@C) as anodes by direct pyrolysis of an iron(III) p-toluenesulfonate precursor. The carbon architecture embedded with FeS nanoparticles provides a rapid electron transport property, and its hierarchical porous structure effectively enhances the ion transport rate, thereby leading to a good electrochemical performance. The resultant FeS@C anodes exhibit high reversible capacity and long cycle life up to 500 cycles at high current density. This work provides a simple strategy for the mass production of FeS@C particles, which represents a critical step forward toward practical applications of iron sulfurs anodes.

| S-EPMC6835662 | biostudies-literature

Sea Urchin-like Si@MnO2@rGO as Anodes for High-Performance Lithium-Ion Batteries.

Project description:Si is a promising material for applications as a high-capacity anode material of lithium-ion batteries. However, volume expansion, poor electrical conductivity, and a short cycle life during the charging/discharging process limit the commercial use. In this paper, new ternary composites of sea urchin-like Si@MnO2@reduced graphene oxide (rGO) prepared by a simple, low-cost chemical method are presented. These can effectively reduce the volume change of Si, extend the cycle life, and increase the lithium-ion battery capacity due to the dual protection of MnO2 and rGO. The sea urchin-like Si@MnO2@rGO anode shows a discharge specific capacity of 1282.72 mAh g-1 under a test current of 1 A g-1 after 1000 cycles and excellent chemical performance at different current densities. Moreover, the volume expansion of sea urchin-like Si@MnO2@rGO anode material is ~50% after 150 cycles, which is much less than the volume expansion of Si (300%). This anode material is economical and environmentally friendly and this work made efforts to develop efficient methods to store clean energy and achieve carbon neutrality.

| S-EPMC8778068 | biostudies-literature

A limitation map of performance for porous electrodes in lithium-ion batteries.

Project description:Driven by expanding interest in battery storage solutions and the success story of lithium-ion batteries, the research for the discovery and optimization of new battery materials and concepts is at peak. The generation of experimental (dis)charge data using coin cells is fast and feasible and proves to be a favorite practice in the battery research labs. The quantitative interpretation of the data, however, is not trivial and decelerates the process of screening and optimization of electrode materials and recipes. Here, we introduce the concept of polarographic map and demonstrate how it can be leveraged to quantify the contribution of different non-equilibrium phenomena to the performance limitation and total polarization of a lithium-ion cell. We showcase the accuracy and diagnostic power of this approach by preparing and analyzing the electrochemical performance of 54 sets of LiNixMnyCo1-x-yO2 electrodes with different formulations and designs discharged in a range of 0.2C-5C.

| S-EPMC8661466 | biostudies-literature

Organic-Inorganic Hybrid Interfaces Enable the Preparation of Nitrogen-Doped Hollow Carbon Nanospheres as High-Performance Anodes for Lithium and Potassium-Ion Batteries.

Project description:An abundant hollow nanostructure is crucial for fast Li+ and K+ diffusion paths and sufficient electrolyte penetration, which creates a highly conductive network for ionic and electronic transport. In this study, we successfully developed a molecular-bridge-linked, organic-inorganic hybrid interface that enables the preparation of in situ nitrogen-doped hollow carbon nanospheres. Moreover, the prepared HCNSs, with high nitrogen content of up to 10.4%, feature homogeneous and regular morphologies. The resulting HCNSs exhibit excellent lithium and potassium storage properties when used as electrode materials. Specifically, the HCNS-800 electrode demonstrates a stable reversible discharge capacity of 642 mA h g-1 at 1000 mA g-1 after 500 cycles for LIBs. Similarly, the electrode maintains a discharge capacity of 205 mA h g-1 at 100 mA g-1 after 500 cycles for KIBs. Moreover, when coupled with a high-mass-loading LiFePO4 cathode to design full cells, the HCNS-800‖LiFePO4 cells provide a specific discharge capacity of 139 mA h g-1 at 0.1 C. These results indicate that the HCNS electrode has promising potential for use in high-energy and environmentally sustainable lithium-based and potassium-based batteries.

| S-EPMC10381384 | biostudies-literature

Controllable synthesis of mesostructures from TiO<sub>2</sub> hollow to porous nanospheres with superior rate performance for lithium ion batteries.

Project description:Uniform TiO2 nanospheres from hollow, core-shell and mesoporous structures have been synthesized using quasi-nano-sized carbonaceous spheres as templates. The TiO2 nanospheres formed after calcination at 400 °C are composed of ∼7 nm nanoparticles and the shells of the hollow TiO2 nanospheres are as thin as a single layer of nanoparticles. The ultrafine nanoparticles endow the hollow and mesoporous TiO2 nanospheres with short lithium ion diffusion paths leading to high discharge specific capacities of 211.9 and 196.0 mA h g-1 at a current rate of 1 C (167.5 mA g-1) after 100 cycles, and especially superior discharge specific capacities of 125.9 and 113.4 mA h g-1 at a high current rate of up to 20 C. The hollow and mesoporous TiO2 nanospheres also show superior cycling stability with long-term discharge capacities of 103.0 and 110.2 mA h g-1, respectively, even after 3000 cycles at a current rate of 20 C.

| S-EPMC5580042 | biostudies-literature

Inward lithium-ion breathing of hierarchically porous silicon anodes.

Project description:Silicon has been identified as a highly promising anode for next-generation lithium-ion batteries (LIBs). The key challenge for Si anodes is large volume change during the lithiation/delithiation cycle that results in chemomechanical degradation and subsequent rapid capacity fading. Here we report a novel fabrication method for hierarchically porous Si nanospheres (hp-SiNSs), which consist of a porous shell and a hollow core. On charge/discharge cycling, the hp-SiNSs accommodate the volume change through reversible inward Li breathing with negligible particle-level outward expansion. Our mechanics analysis revealed that such inward expansion is enabled by the much stiffer lithiated layer than the unlithiated porous layer. LIBs assembled with the hp-SiNSs exhibit high capacity, high power and long cycle life, which is superior to the current commercial Si-based anode materials. The low-cost synthesis approach provides a new avenue for the rational design of hierarchically porous structures with unique materials properties.

| S-EPMC4667626 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data