Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A self-powered, one-step chip for rapid, quantitative and multiplexed detection of proteins from pinpricks of whole blood.

ABSTRACT: We describe an automated, self-powered chip based on lateral flow immunoassay for rapid, quantitative, and multiplex protein detection from pinpricks of whole blood. The device incorporates on-chip purification of blood plasma by employing inertial forces to focus blood cells away from the assay surface, where plasma proteins are captured and detected on antibody "barcode" arrays. Power is supplied from the capillary action of a piece of adsorbent paper, and sequentially drives, over a 40 minute period, the four steps required to capture serum proteins and then develop a multiplex immunoassay. An 11 protein panel is assayed from whole blood, with high sensitivity and high reproducibility. This inexpensive, self-contained, and easy to operate chip provides a useful platform for point-of-care diagnoses, particularly in resource-limited settings.

SUBMITTER: Wang J

PROVIDER: S-EPMC3651856 | biostudies-literature | 2010 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A self-powered, one-step chip for rapid, quantitative and multiplexed detection of proteins from pinpricks of whole blood.

Wang Jun J Ahmad Habib H Ma Chao C Shi Qihui Q Vermesh Ophir O Vermesh Udi U Heath James J

Lab on a chip 20101006 22

We describe an automated, self-powered chip based on lateral flow immunoassay for rapid, quantitative, and multiplex protein detection from pinpricks of whole blood. The device incorporates on-chip purification of blood plasma by employing inertial forces to focus blood cells away from the assay surface, where plasma proteins are captured and detected on antibody "barcode" arrays. Power is supplied from the capillary action of a piece of adsorbent paper, and sequentially drives, over a 40 minute ...[more]

PMID: 20924527

Similar Datasets

Self-powered microfluidic chips for multiplexed protein assays from whole blood.

Project description:We report herein on a self-powered, self-contained microfluidic-based chip designed to separate plasma from whole blood, and then execute an assay of a multiplexed panel of plasma biomarker proteins. The power source is based upon a chemical reaction that is catalytically triggered by the push of a button on the chip. We demonstrate assays of a dozen blood-based protein biomarkers using this automated, self-contained device. This platform can potentially permit high throughput, accurate, multiplexed blood diagnostic measurements in remote locations and by minimally trained individuals.

| S-EPMC3651861 | biostudies-other

Rapid bacterial detection and antibiotic susceptibility testing in whole blood using one-step, high throughput blood digital PCR.

Project description:Sepsis due to antimicrobial resistant pathogens is a major health problem worldwide. The inability to rapidly detect and thus treat bacteria with appropriate agents in the early stages of infections leads to excess morbidity, mortality, and healthcare costs. Here we report a rapid diagnostic platform that integrates a novel one-step blood droplet digital PCR assay and a high throughput 3D particle counter system with potential to perform bacterial identification and antibiotic susceptibility profiling directly from whole blood specimens, without requiring culture and sample processing steps. Using CTX-M-9 family ESBLs as a model system, we demonstrated that our technology can simultaneously achieve unprecedented high sensitivity (10 CFU per ml) and rapid sample-to-answer assay time (one hour). In head-to-head studies, by contrast, real time PCR and BioRad ddPCR only exhibited a limit of detection of 1000 CFU per ml and 50-100 CFU per ml, respectively. In a blinded test inoculating clinical isolates into whole blood, we demonstrated 100% sensitivity and specificity in identifying pathogens carrying a particular resistance gene. We further demonstrated that our technology can be broadly applicable for targeted detection of a wide range of antibiotic resistant genes found in both Gram-positive (vanA, nuc, and mecA) and Gram-negative bacteria, including ESBLs (blaCTX-M-1 and blaCTX-M-2 families) and CREs (blaOXA-48 and blaKPC), as well as bacterial speciation (E. coli and Klebsiella spp.) and pan-bacterial detection, without requiring blood culture or sample processing. Our rapid diagnostic technology holds great potential in directing early, appropriate therapy and improved antibiotic stewardship in combating bloodstream infections and antibiotic resistance.

| S-EPMC7250044 | biostudies-literature

Self-monitoring of blood glucose: one STeP forward?

Project description:IntroductionIn times of short health care budgets, reimbursement for self-monitoring of blood glucose (SMBG) in diabetes patients without insulin treatment is subject to debate. The Structured Testing Program (STeP) trial found a positive correlation of test frequency and improved hemoglobin A1c (HbA1c) levels in poorly controlled type 2 diabetes patients not treated with insulin.MethodsA structured literature search for other clinical studies reporting on SMBG frequency was performed.ResultsThere is scarce evidence: three trials, including STeP, noted a significant and relevant correlation between testing frequency and improved HbA1c levels (FA effect), whereas two studies did not. The comparability between the identified studies is problematic.ConclusionFuture research should consider correlations between testing frequency and level of glycemic control. More emphasis should be placed on a structured approach to use SMBG and to address adherence to testing and therapy.

| S-EPMC3440172 | biostudies-literature

Quantitative self-powered electrochromic biosensors.

Project description:Self-powered sensors are analytical devices able to generate their own energy, either from the sample itself or from their surroundings. The conventional approaches rely heavily on silicon-based electronics, which results in increased complexity and cost, and prevents the broader use of these smart systems. Here we show that electrochromic materials can overcome the existing limitations by simplifying device construction and avoiding the need for silicon-based electronics entirely. Electrochromic displays can be built into compact self-powered electrochemical sensors that give quantitative information readable by the naked eye, simply controlling the current path inside them through a combination of specially arranged materials. The concept is validated by a glucose biosensor coupled horizontally to a Prussian blue display designed as a distance-meter proportional to (glucose) concentration. This approach represents a breakthrough for self-powered sensors, and extends the application of electrochromic materials beyond smart windows and displays, into sensing and quantification.

| S-EPMC5398271 | biostudies-literature

A microfluidic chip for direct and rapid trapping of white blood cells from whole blood.

Project description:Blood analysis plays a major role in medical and science applications and white blood cells (WBCs) are an important target of analysis. We proposed an integrated microfluidic chip for direct and rapid trapping WBCs from whole blood. The microfluidic chip consists of two basic functional units: a winding channel to mix and arrays of two-layer trapping structures to trap WBCs. Red blood cells (RBCs) were eliminated through moving the winding channel and then WBCs were trapped by the arrays of trapping structures. We fabricated the PDMS (polydimethylsiloxane) chip using soft lithography and determined the critical flow velocities of tartrazine and brilliant blue water mixing and whole blood and red blood cell lysis buffer mixing in the winding channel. They are 0.25 μl/min and 0.05 μl/min, respectively. The critical flow velocity of the whole blood and red blood cell lysis buffer is lower due to larger volume of the RBCs and higher kinematic viscosity of the whole blood. The time taken for complete lysis of whole blood was about 85 s under the flow velocity 0.05 μl/min. The RBCs were lysed completely by mixing and the WBCs were trapped by the trapping structures. The chip trapped about 2.0 × 10(3) from 3.3 × 10(3) WBCs.

| S-EPMC3689821 | biostudies-other

Self-powered integrated microfluidic point-of-care low-cost enabling (SIMPLE) chip.

Project description:Portable, low-cost, and quantitative nucleic acid detection is desirable for point-of-care diagnostics; however, current polymerase chain reaction testing often requires time-consuming multiple steps and costly equipment. We report an integrated microfluidic diagnostic device capable of on-site quantitative nucleic acid detection directly from the blood without separate sample preparation steps. First, we prepatterned the amplification initiator [magnesium acetate (MgOAc)] on the chip to enable digital nucleic acid amplification. Second, a simplified sample preparation step is demonstrated, where the plasma is separated autonomously into 224 microwells (100 nl per well) without any hemolysis. Furthermore, self-powered microfluidic pumping without any external pumps, controllers, or power sources is accomplished by an integrated vacuum battery on the chip. This simple chip allows rapid quantitative digital nucleic acid detection directly from human blood samples (10 to 105 copies of methicillin-resistant Staphylococcus aureus DNA per microliter, ~30 min, via isothermal recombinase polymerase amplification). These autonomous, portable, lab-on-chip technologies provide promising foundations for future low-cost molecular diagnostic assays.

| S-EPMC5362183 | biostudies-literature

Paper-Origami-Based Multiplexed Malaria Diagnostics from Whole Blood.

Project description:We demonstrate, for the first time, the multiplexed determination of microbial species from whole blood using the paper-folding technique of origami to enable the sequential steps of DNA extraction, loop-mediated isothermal amplification (LAMP), and array-based fluorescence detection. A low-cost handheld flashlight reveals the presence of the final DNA amplicon to the naked eye, providing a "sample-to-answer" diagnosis from a finger-prick volume of human blood, within 45?min, with minimal user intervention. To demonstrate the method, we showed the identification of three species of Plasmodium, analyzing 80?patient samples benchmarked against the gold-standard polymerase chain reaction (PCR) assay in an operator-blinded study. We also show that the test retains its diagnostic accuracy when using stored or fixed reference samples.

| S-EPMC5132111 | biostudies-literature

Rapid, One-step Sample Processing for Label-Free Single-Cell Proteomics

Project description:Sample preparation for single-cell proteomics is generally performed in a one-pot workflow with multiple dispensing and incubation steps. These hours-long workflows can be labor intensive and lead to long sample-to-answer times. Here we report a sample processing method that achieves cell lysis, protein denaturation and digestion in one hour with a single reagent dispensing step using commercially available high-temperature-stabilized proteases. Four different one-step reagent compositions were evaluated, and the mixture providing greatest proteome coverage was compared to the previously employed multi-step workflow. The one-step preparation increases proteome coverage relative to the multi-step workflow while minimizing labor input and the possibility of human error. We also compared sample recovery between previously used microfabricated glass nanowell chips and injection-molded polypropylene substrates, and found the polypropylene provided improved proteome coverage. Combined, the one-step sample preparation and the polypropylene substrates enabled identification of an average of nearly 2,400 proteins per cell using a standard data-dependent workflow with an Orbitrap mass spectrometer. As such, these advances significantly simplify sample preparation for single-cell proteomics and broaden accessibility with no compromise in terms of proteome coverage.

2023-10-09 | PXD041879 | Pride

Multiplexed detection of viral infections using rapid in situ RNA analysis on a chip.

Project description:Viral infections are a major cause of human disease, but many require molecular assays for conclusive diagnosis. Current assays typically rely on RT-PCR or ELISA; however, these tests often have limited speed, sensitivity or specificity. Here, we demonstrate that rapid RNA FISH is a viable alternative method that could improve upon these limitations. We describe a platform beginning with software to generate RNA FISH probes both for distinguishing related strains of virus (even those different by a single base) and for capturing large numbers of strains simultaneously. Next, we present a simple fluidic device for reliably performing RNA FISH assays in an automated fashion. Finally, we describe an automated image processing pipeline to robustly identify uninfected and infected samples. Together, our results establish RNA FISH as a methodology with potential for viral point-of-care diagnostics.

| S-EPMC4670042 | biostudies-literature

Rapid one-step biotinylation of biological and non-biological surfaces.

Project description:We describe a rapid one-step method to biotinylate virtually any biological or non-biological surface. Contacting a solution of biotin-spacer-lipid constructs with a surface will form a coating within seconds on non-biological surfaces or within minutes on most biological membranes including membrane viruses. The resultant biotinylated surface can then be used to interact with avidinylated conjugates, beads, vesicles, surfaces or cells.

| S-EPMC5809608 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data