Resampling-based approaches to study variation in morphological modularity.
Ontology highlight
ABSTRACT:
SUBMITTER: Fruciano C
PROVIDER: S-EPMC3712944 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Conventional molecular dynamics simulations are incapable of sampling many important interactions in biomolecular systems due to their high dimensionality and rough energy landscapes. To observe rare events and calculate transition rates in these systems, enhanced sampling is a necessity. In particular, the study of ligand-protein interactions necessitates a diverse ensemble of protein conformations and transition states, and for many systems, this occurs on prohibitively long time scales. Previous strategies such as WExplore that can be used to determine these types of ensembles are hindered by problems related to the regioning of conformational space. Here, we propose a novel, regionless, enhanced sampling method that is based on the weighted ensemble framework. In this method, a value referred to as "trajectory variation" is optimized after each cycle through cloning and merging operations. This method allows for a more consistent measurement of observables and broader sampling resulting in the efficient exploration of previously unexplored conformations. We demonstrate the performance of this algorithm with the N-dimensional random walk and the unbinding of the trypsin-benzamidine system. The system is analyzed using conformation space networks, the residence time of benzamidine is confirmed, and a new unbinding pathway for the trypsin-benzamidine system is found. We expect that resampling of ensembles by variation optimization will be a useful general tool to broadly explore free energy landscapes.
| S-EPMC7043833 | biostudies-literature
Project description:We propose new resampling-based approaches to construct asymptotically valid time-simultaneous confidence bands for cumulative hazard functions in multistate Cox models. In particular, we exemplify the methodology in detail for the simple Cox model with time-dependent covariates, where the data may be subject to independent right-censoring or left-truncation. We use simulations to investigate their finite sample behavior. Finally, the methods are utilized to analyze two empirical examples with survival and competing risks data.
| S-EPMC6849815 | biostudies-literature
Project description:Neotropical bats of the genus Carollia are widely studied due to their abundance, distribution and relevance for ecosystems. However, the ecomorphological boundaries of these species are poorly differentiated, and consequently correspondence between their geographic distribution, ecological plasticity and morphological variation remains unclear. In this study, patterns of cranial and mandibular morphological variation were assessed for Carollia brevicauda, C. castanea and C. perspicillata from Colombia. Using geometric morphometrics, morphological variation was examined with respect to: differences in intraspecific variation, morphological modularity and integration, and biogeographic patterns. Patterns of intraspecific variation were different for each species in both cranial and mandibular morphology, with functional differences apparent according to diet. Cranial modularity varied between species whereas mandibular modularity did not. High cranial and mandibular correlation reflects Cranium-Mandible integration as a functional unit. Similarity between the biogeographic patterns in C. brevicauda and C. perspicillata indicates that the Andes do not act as a barrier but rather as an independent region, isolating the morphology of Andean populations of larger-bodied species. The biogeographic pattern for C. castanea was not associated with the physiography of the Andes, suggesting that large body size does not benefit C. brevicauda and C. perspicillata in maintaining homogeneous morphologies among populations.
| S-EPMC4581772 | biostudies-literature
Project description:Modularity is considered a prerequisite for the evolvability of biological systems. This is because in theory, individual modules can follow quasi-independent evolutionary trajectories or evolve at different rates compared to other aspects of the organism. This may influence the potential of some modules to diverge, leading to differences in disparity. Here, we investigated this relationship between modularity, rates of morphological evolution and disparity using a phylogenetically diverse sample of ray-finned fishes. We compared the support for multiple hypotheses of evolutionary modularity and asked if the partitions delimited by the best-fitting models were also characterized by the highest evolutionary rate differentials. We found that an evolutionary module incorporating the dorsal, anal and paired fins was well supported by the data, and that this module evolves more rapidly and consequently generates more disparity than other modules. This suggests that modularity may indeed promote morphological disparity through differences in evolutionary rates across modules.
| S-EPMC5940925 | biostudies-literature
Project description:BackgroundCaecilians (Gymnophiona) are the least speciose extant lissamphibian order, yet living forms capture approximately 250 million years of evolution since their earliest divergences. This long history is reflected in the broad range of skull morphologies exhibited by this largely fossorial, but developmentally diverse, clade. However, this diversity of form makes quantification of caecilian cranial morphology challenging, with highly variable presence or absence of many structures. Consequently, few studies have examined morphological evolution across caecilians. This extensive variation also raises the question of degree of conservation of cranial modules (semi-autonomous subsets of highly-integrated traits) within this clade, allowing us to assess the importance of modular organisation in shaping morphological evolution. We used an intensive surface geometric morphometric approach to quantify cranial morphological variation across all 32 extant caecilian genera. We defined 16 cranial regions using 53 landmarks and 687 curve and 729 surface sliding semilandmarks. With these unprecedented high-dimensional data, we analysed cranial shape and modularity across caecilians assessing phylogenetic, allometric and ecological influences on cranial evolution, as well as investigating the relationships among integration, evolutionary rate, and morphological disparity.ResultsWe found highest support for a ten-module model, with greater integration of the posterior skull. Phylogenetic signal was significant (Kmult = 0.87, p < 0.01), but stronger in anterior modules, while allometric influences were also significant (R2 = 0.16, p < 0.01), but stronger posteriorly. Reproductive strategy and degree of fossoriality were small but significant influences on cranial morphology (R2 = 0.03-0.05), after phylogenetic (p < 0.03) and multiple-test (p < 0.05) corrections. The quadrate-squamosal 'cheek' module was the fastest evolving module, perhaps due to its pivotal role in the unique dual jaw-closing mechanism of caecilians. Highly integrated modules exhibited both high and low disparities, and no relationship was evident between integration and evolutionary rate.ConclusionsOur high-dimensional approach robustly characterises caecilian cranial evolution and demonstrates that caecilian crania are highly modular and that cranial modules are shaped by differential phylogenetic, allometric, and ecological effects. More broadly, and in contrast to recent studies, this work suggests that there is no simple relationship between integration and evolutionary rate or disparity.
| S-EPMC6343317 | biostudies-literature
Project description:The cranium is an anatomically complex structure. One source of its complexity is due to its modular organization. Cranial modules are distinct and partially independent units that interact substantially during ontogeny thus generating morphological integration. Artificial Cranial Deformation (ACD) occurs when the human skull is intentionally deformed, through the use of different deforming devices applied to the head while it is developing. Hence, ACD provides an interesting example to assess the degree to which biomechanical perturbations of the developing neurocranium impact on the degree of morphological integration in the skull as a whole. The main objective of this study was to assess how ACD affects the morphological integration of the skull. This was accomplished by comparing a sample of non-deformed crania and two sets of deformed crania (i.e. antero-posterior and oblique). Both developmental and static modularity and integration were assessed through Generalized Procrustes Analysis by considering the symmetric and asymmetric components of variation in adults, using 3D landmark coordinates as raw data. The presence of two developmental modules (i.e. viscero and neurocranium) in the skull was tested. Then, in order to understand how ACD affects morphological integration, the covariation pattern between the neuro and viscerocranium was examined in antero-posterior, oblique and non-deformed cranial categories using Partial Least-Squares. The main objective of this study was to assess how ACD affects the morphological integration of the skull. This was accomplished by comparing a sample of deformed (i.e. antero-posterior and oblique) and non-deformed crania. Hence, differences in integration patterns were compared between groups. The obtained results support the modular organization of the human skull in the two analyzed modules. The integration analyses show that the oblique ACD style differentially affects the static morphological integration of the skull by increasing the covariance between neuro and viscerocranium in a more constrained way than in antero-posterior and non-deformed skulls. In addition, the antero-posterior ACD style seems to affect the developmental integration of the skull by directing the covariation pattern in a more defined manner as compared to the other cranial categories.
| S-EPMC6980596 | biostudies-literature
Project description:Ecological data often violate common assumptions of traditional parametric statistics (e.g., that residuals are Normally distributed, have constant variance, and cases are independent). Modern statistical methods are well equipped to handle these complications, but they can be challenging for non-statisticians to understand and implement. Rather than default to increasingly complex statistical methods, resampling-based methods can sometimes provide an alternative method for performing statistical inference, while also facilitating a deeper understanding of foundational concepts in frequentist statistics (e.g., sampling distributions, confidence intervals, p-values). Using simple examples and case studies, we demonstrate how resampling-based methods can help elucidate core statistical concepts and provide alternative methods for tackling challenging problems across a broad range of ecological applications.
| S-EPMC7211410 | biostudies-literature
Project description:IntroductionFacial phenotype is influenced by genes and environment; however, little is known about their relative contributions to normal facial morphology. The aim of this study was to assess the relative genetic and environmental contributions to facial morphological variation using a three-dimensional (3D) population-based approach and the classical twin study design.Materials and methods3D facial images of 1380 female twins from the TwinsUK Registry database were used. All faces were landmarked, by manually placing 37 landmark points, and Procrustes registered. Three groups of traits were extracted and analysed: 19 principal components (uPC) and 23 principal components (sPC), derived from the unscaled and scaled landmark configurations respectively, and 1275 linear distances measured between 51 landmarks (37 manually identified and 14 automatically calculated). The intraclass correlation coefficients, rMZ and rDZ, broad-sense heritability (h2), common (c2) and unique (e2) environment contributions were calculated for all traits for the monozygotic (MZ) and dizygotic (DZ) twins.ResultsHeritability of 13 uPC and 17 sPC reached statistical significance, with h2 ranging from 38.8% to 78.5% in the former and 30.5% to 84.8% in the latter group. Also, 1222 distances showed evidence of genetic control. Common environment contributed to one PC in both groups and 53 linear distances (4.3%). Unique environment contributed to 17 uPC and 20 sPC and 1245 distances.ConclusionsGenetic factors can explain more than 70% of the phenotypic facial variation in facial size, nose (width, prominence and height), lips prominence and inter-ocular distance. A few traits have shown potential dominant genetic influence: the prominence and height of the nose, the lower lip prominence in relation to the chin and upper lip philtrum length. Environmental contribution to facial variation seems to be the greatest for the mandibular ramus height and horizontal facial asymmetry.
| S-EPMC5008732 | biostudies-literature
Project description:BackgroundMeiofauna - multicellular animals captured between sieve size 45 mum and 1000 mum - are a fundamental component of terrestrial, and marine benthic ecosystems, forming an integral element of food webs, and playing a critical roll in nutrient recycling. Most phyla have meiofaunal representatives and studies of these taxa impact on a wide variety of sub-disciplines as well as having social and economic implications. However, studies of variation in meiofauna are presented with several important challenges. Isolating individuals from a sample substrate is a time consuming process, and identification requires increasingly scarce taxonomic expertise. Finding suitable morphological characters in many of these organisms is often difficult even for experts. Molecular markers are extremely useful for identifying variation in morphologically conserved organisms. However, for many species markers need to be developed de novo, while DNA can often only be extracted from pooled samples in order to obtain sufficient quantity and quality. Importantly, multiple independent markers are required to reconcile gene evolution with species evolution. In this primarily methodological paper we provide a proof of principle of a novel and effective protocol for the isolation of meiofauna from an environmental sample. We also go on to illustrate examples of the implications arising from subsequent screening for genetic variation at the level of the individual using ribosomal, mitochondrial and single copy nuclear markers.ResultsTo isolate individual tardigrades from their habitat substrate we used a non-toxic density gradient media that did not interfere with downstream biochemical processes. Using a simple DNA release technique and nested polymerase chain reaction with universal primers we were able amplify multi-copy and, to some extent, single copy genes from individual tardigrades. Maximum likelihood trees from ribosomal 18S, mitochondrial cytochrome oxidase subunit 1, and the single copy nuclear gene Wingless support a recent study indicating that the family Hypsibiidae is a non-monophyletic group. From these sequences we were able to detect variation between individuals at each locus that allowed us to identify the presence of cryptic taxa that would otherwise have been overlooked.ConclusionMolecular results obtained from individuals, rather than pooled samples, are a prerequisite to enable levels of variation to be placed into context. In this study we have provided a proof of principle of this approach for meiofaunal tardigrades, an important group of soil biota previously not considered amenable to such studies, thereby paving the way for more comprehensive phylogenetic studies using multiple nuclear markers, and population genetic studies.
| S-EPMC2387140 | biostudies-literature
Project description:The present study, initially to resolve the cryptic species within Corollospora maritima, is to determine how to attain taxonomic discrimination at species and generic levels. Multiple sequence alignments (MSAs) of the ITS, 28S, and 18S regions of the nuclear ribosomal cistron were separately subjected to pairwise distance assessments, Bayesian, and Maximum likelihood phylogenetic analyses. Morphological descriptions of 15 type strains of Corollospora species, along with MSAs involving representatives of the whole genus Corollospora (268 isolates, many from C. maritima sensu lato) totaling 355 published sequences, allowed phylogenetic assessments conducted to the following p-distance thresholds in the ITS/28S regions: ≥3%/1% for species segregation and ≥8%/2% for generic segregation. This resulted in the introduction of 10 new genera encompassing 13 new combinations of current Corollospora species: Ajigaurospora pseudopulchella, Corollosporella anglusa, Corollosporella ramulosa, Corollosporopsis portsaidica, Garethelia parvula, Honshuriella fusca, Keraliethelia pulcehlla, Nakagariella filiformis, Paracorollospora angusta, Paracorollospora luteola, Paracorollospora marina, Shirahamella gracilis, and Tokuratelia colossa. Furthermore, seven undefined genera considered putative new genera (pNGenus A to G), and 16 undefined putative new species (seven spp. come from the resolution of the C. maritima complex), await re-assessment of their morphology and additional molecular data, which may result in the recognition of new taxa.
| S-EPMC10455288 | biostudies-literature