Dataset Information

Layer-by-layer assembly of thick, Cu(2+)-chelating films.

ABSTRACT: Layer-by-layer adsorption of protonated poly(allylamine) (PAH) and deprotonated poly(N,N-dicarboxymethylallylamine) (PDCMAA) yields thick films with a high density of iminodiacetic acid (IDA) ligands that bind metal ions. When film deposition occurs at pH 3.0, PAH/PDCMAA bilayer thicknesses reach 200 nm, and Cu(2+) binding capacities are ~2.5 mmol per cm(3) of film. (PAH/PDCMAA)10 films deposited at pH 3.0 are 4-8-fold thicker than films formed at pH 5.0, 7.0, or 9.0, presumably because of the low charge density on PDCMAA chains at pH 3.0. However, with normalization to film thickness, all films bind similar amounts of Cu(2+) from pH 4.1 solutions of CuSO4. In micrometer-thick films, equilibration of binding sites with Cu(2+) requires ~4 h due to a low Cu(2+) diffusion coefficient (~2.6 × 10(-12) cm(2)/s). Sorption isotherms determined at several temperatures show that Cu(2+) binding is endothermic with a positive entropy (binding constants increase with increasing temperature), presumably because metal-ion complexation involves displacement of both a proton from IDA and water molecules from Cu(2+). (PAH/PDCMAA)10 films retain their binding capacity over four absorption/elution cycles and may prove useful in metal-ion scavenging, catalysis, and protein binding.

SUBMITTER: Wijeratne S

PROVIDER: S-EPMC3873220 | biostudies-literature | 2013 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Layer-by-layer assembly of thick, Cu(2+)-chelating films.

Wijeratne Salinda S Bruening Merlin L ML Baker Gregory L GL

Langmuir : the ACS journal of surfaces and colloids 20131003 41

Layer-by-layer adsorption of protonated poly(allylamine) (PAH) and deprotonated poly(N,N-dicarboxymethylallylamine) (PDCMAA) yields thick films with a high density of iminodiacetic acid (IDA) ligands that bind metal ions. When film deposition occurs at pH 3.0, PAH/PDCMAA bilayer thicknesses reach 200 nm, and Cu(2+) binding capacities are ~2.5 mmol per cm(3) of film. (PAH/PDCMAA)10 films deposited at pH 3.0 are 4-8-fold thicker than films formed at pH 5.0, 7.0, or 9.0, presumably because of the l ...[more]

PMID: 24044576

Similar Datasets

Project description:We report an approach to the fabrication of superhydrophobic thin films that is based on the 'reactive' layer-by-layer assembly of azlactone-containing polymer multilayers. We demonstrate that films fabricated from alternating layers of the azlactone functionalized polymer poly(2-vinyl-4,4-dimethylazlactone) (PVDMA) and poly(ethyleneimine) (PEI) exhibit micro- and nanoscale surface features that result in water contact angles in excess of 150º. Our results reveal that the formation of these surface features is (i) dependent upon film thickness (i.e., the number of layers of PEI and PVDMA deposited) and (ii) that it is influenced strongly by the presence (or absence) of cyclic azlactone-functionalized oligomers that can form upon storage of the 2-vinyl-4,4-dimethylazlactone (VDMA) used to synthesize PVDMA. For example, films fabricated using polymers synthesized in the presence of these oligomers exhibited rough, textured surfaces and superhydrophobic behavior (i.e., advancing contact angles in excess of 150º). In contrast, films fabricated from PVDMA polymerized in the absence of this oligomer (e.g., using freshly distilled monomer) were smooth and only moderately hydrophobic (i.e., advancing contact angles of ~75º). The addition of authentic, independently synthesized oligomer to samples of distilled VDMA at specified and controlled concentrations permitted reproducible fabrication of superhydrophobic thin films on the surfaces of a variety of different substrates. The surfaces of these films were demonstrated to be superhydrophobic immediately after fabrication, but they became hydrophilic after exposure to water for six days. Additional experiments demonstrated that it was possible to stabilize and prolong the superhydrophobic properties of these films (e.g., advancing contact angles in excess of 150° even after complete submersion in water for at least six weeks) by exploiting the reactivity of residual azlactones to functionalize the surfaces of the films using hydrophobic amines (e.g., aliphatic or semi-fluorinated aliphatic amines). Our results demonstrate a straightforward and substrate-independent approach to the design of superhydrophobic and reactive polymer-based coatings of potential use in a broad range of fundamental and applied contexts.

Project description:We report an investigation of the self-assembly of the monosialoganglioside (GM(1)) at interfaces formed between aqueous solutions of 10 microM GM(1) (at 25 degrees C) and micrometer-thick films of the nematic liquid crystal (LC) 4'-pentyl-4-cyanobiphenyl (5CB). We observe the process of spontaneous transfer of GM(1) onto the interfaces to be accompanied by continuous ordering transitions within the micrometer-thick films of the LC. At saturation coverage, the GM(1) orders the LC in an orientation that is perpendicular to the interface, an orientation that is similar to that caused by phospholipids such as dilauroylphosphatidylcholine (DLPC). This result suggests an interaction between the LC and GM(1) that is dominated by the hydrophobic tails of the GM(1). Relative to DLPC, however, we observe the dynamics of the LC ordering transition driven by GM(1) to be slow (2 h for DLPC versus 100 h for GM(1)). To provide insight into the origins of the slow dynamics of the GM(1)-induced ordering transition in the LC, we performed two additional measurements. First, we quantified the time-dependent adsorption of GM(1) at the LC interface by using fluorescently-labeled GM(1). Second, we used the Langmuir-Schaefer method to transfer preorganized monolayers of GM(1) from an air-water interface to the aqueous-LC interface. Results obtained from these two experiments are consistent with a physical picture in which the final stages of spontaneous adsorption/ordering of GM(1) at the aqueous-LC interface dictate the dynamics of the LC ordering transition. This rate limiting process underlying the ordering transition was substantially accelerated by heating the system above the phase transition temperature of GM(1)(26 degrees C), suggesting that the phase state of the GM(1) micellar aggregates in bulk solution strongly influences the kinetics of the final stages of ordering/adsorption of GM(1) at the LC interface. Overall, these results and others presented in this manuscript reveal that it is possible to decorate interfaces of a nematic LC with GM(1), and that the assembly of GM(1) at these interfaces impacts the dynamic and equilibrium ordering of the LC.

Dataset Information

Layer-by-layer assembly of thick, Cu(2+)-chelating films.

Publications

Layer-by-layer assembly of thick, Cu(2+)-chelating films.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets